Zuzanna D. Krawczyk

Ms. Zuzanna D. Krawczyk

École Polytechnique Fédérale de Lausanne, Lausanne, Vaud, Switzerland
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2020 in Processes
Verified
Journal Article
Open access
PDF file
Rafał KozeraRafał Kozera
Rafał Kozera
BPBartlomiej Przybyszewski
Bartlomiej Przybyszewski
Zuzanna D. KrawczykZuzanna D. Krawczyk
Zuzanna D. Krawczyk
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
BSBogna Sztorch
Bogna Sztorch
ABAna Borras
Ana Borras
Ice accumulation on wind turbine blades due to the impact of supercooled water droplets can be reduced by the application of surfaces with anti-icing properties. Hydrophobic surfaces are considered as a promising solution because of their water repellent behavior. In recent years, short-pulsed laser technologies have been developed as an efficient technique to modify the surface properties of materials. However, the anti-icing properties of such surfaces have not yet been validated. In this work, a hybrid modification of polyester resin-based gelcoats was adopted. Laser patterning (LP) was used to produce periodic surface structures on modified unsaturated polyester resin (UPR) substrates. One of the innovations of this research is the utilization of novel purpose-made chemical modifiers for gelcoats. The implementation of linear polymethylhydrosiloxane (PMHS) as a building block is a key improvement in terms of durability and functionality of the coating, since there is an option of introducing not only groups bonding in the polyester into one molecule, but also groups that increase hydrophobicity. The other novelty is a successfully conducted experiment combining such chemical modification with laser texturization of the surface. The influence of the laser energy, pattern shape, and spatial periods on the topographical characteristics and hydrophobicity as well as the anti-icing properties of the produced surfaces were investigated. To characterize the surface topography of the produced structures, scanning electron microscopy (SEM) and profilometer were utilized. Measurements of the wettability parameters (static contact angle and contact angle hysteresis) on the treated surfaces allowed the identification of the influence of wetting behavior and laser parameters on the investigated materials. Anti-icing properties were characterized by ice adhesion (IA) and freezing delay time (FDT) tests. It was found that hybrid modification of unsaturated polyester resin by chemical modifiers and laser treatment increased the hydrophobic and anti-icing properties of polyester gelcoats.

2 February 2024 in Polymers
Verified
Journal Article
Open access
PDF file
SDSzymon Demski
Szymon Demski
DBDariusz Brząkalski
Dariusz Brząkalski
MGMaciej Gubernat
Maciej Gubernat
KDKamil Dydek
Kamil Dydek
PCPaweł Czaja
Paweł Czaja
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
The main goal of this work was an improvement in the mechanical and electrical properties of acrylic resin-based nanocomposites filled with chemically modified carbon nanotubes. For this purpose, the surface functionalization of multi-walled carbon nanotubes (MWCNTs) was carried out by means of aryl groups grafting via the diazotization reaction with selected aniline derivatives, and then nanocomposites based on ELIUM® resin were fabricated. FT-IR analysis confirmed the effectiveness of the carried-out chemical surface modification of MWCNTs as new bands on FT-IR spectra appeared in the measurements. TEM observations showed that carbon nanotube fragmentation did not occur during the modifications. According to the results from Raman spectroscopy, the least defective carbon nanotube structure was obtained for aniline modification. Transmission light microscopy analysis showed that the neat MWCNTs agglomerate strongly, while the proposed modifications improved their dispersion significantly. Viscosity tests confirmed, that as the nanofiller concentration increases, the viscosity of the mixture increases. The mixture with the highest dispersion of nanoparticles exhibited the most viscous behaviour. Finally, an enhancement in impact resistance and electrical conductivity was obtained for nanocomposites containing modified MWCNTs.

29 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
BPBartlomiej Przybyszewski
Bartlomiej Przybyszewski
Rafał KozeraRafał Kozera
Rafał Kozera
Zuzanna D. KrawczykZuzanna D. Krawczyk
Zuzanna D. Krawczyk
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
Ali DolatabadiAli Dolatabadi
Ali Dolatabadi
Robert Edward PrzekopRobert Edward Przekop
Robert Edward Przekop
Ice formation on the aerodynamic surfaces of an aircraft is regarded as a major problem in the aerospace industry. Ice accumulation may damage parts, sensors and controllers and alter the aerodynamics of the airplane, leading to a range of undesired consequences, including flight delays, emergency landings, damaged parts and increased energy consumption. There are various approaches to reducing ice accretion, one of them being the application of icephobic coatings. In this work, commercially available polyurethane-based coatings were modified and deposited on NACA 0012 aircraft airfoils. A hybrid modification of polyurethane (PUR) topcoats was adopted by the addition of nanosilica and three-functional spherosilicates (a variety of silsesqioxane compound), which owe their unique properties to the presence of three different groups. The ice accretion on the manufactured nanocomposites was determined in an icing wind tunnel. The tests were performed under three different icing conditions: glaze ice, rime ice and mixed ice. Furthermore, the surface topography and wetting behavior (static contact angle and contact angle hysteresis) were investigated. It was found that the anti-icing properties of polyurethane nanocomposite coatings strongly depend on the icing conditions under which they are tested. Moreover, the addition of nanosilica and spherosilicates enabled the reduction of accreted ice by 65% in comparison to the neat topcoat.

24 February 2024 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Verified
Journal Article
Closed access
RKRafał Kozera
Rafał Kozera
KZKatarzyna Ziętkowska
Katarzyna Ziętkowska
Zuzanna D. KrawczykZuzanna D. Krawczyk
Zuzanna D. Krawczyk
BPBartłomiej Przybyszewski
Bartłomiej Przybyszewski
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
JTJakub Trzciński
Jakub Trzciński

5 October 2023 in Sensors
Verified
Journal Article
Open access
PDF file
MDMichal Dziendzikowski
Michal Dziendzikowski
PKPaulina Kozera
Paulina Kozera
KKKamil Kowalczyk
Kamil Kowalczyk
KDKamil Dydek
Kamil Dydek
MKMilena Kurkowska
Milena Kurkowska
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
Chemical pressure storage tanks are containers designed to store fluids at high pressures, i.e., their internal pressure is higher than the atmospheric pressure. They can come in various shapes and sizes, and may be fabricated from a variety of materials. As aggressive chemical agents stored under elevated pressures can cause significant damage to both people and the environment, it is essential to develop systems for the early damage detection and the monitoring of structural integrity of such vessels. The development of early damage detection and condition monitoring systems could also help to reduce the maintenance costs associated with periodic inspections of the structure and unforeseen operational breaks due to unmonitored damage development. It could also reduce the related environmental burden. In this paper, we consider a hybrid material composed of glass-fiber-reinforced polymers (GFRPs) and a polyethylene (PE) layer that is suitable for pressurized chemical storage tank manufacturing. GFRPs are used for the outer layer of the tank structure and provides the dominant part of the construction stiffness, while the PE layer is used for protection against the stored chemical medium. The considered damage scenarios include simulated cracks and an erosion of the inner PE layer, as these can be early signs of structural damage leading to the leakage of hazardous liquids, which could compromise safety and, possibly, harm the environment. For damage detection, PZT sensors were selected due to their widely recognized applicability for the purpose of structural health monitoring. For sensor installation, it was assumed that only the outer GFRP layer was available as otherwise sensors could be affected by the stored chemical agent. The main focus of this paper is to verify whether elastic waves excited by PZT sensors, which are installed on the outer GFRP layer, can penetrate the GFRP and PE interface and can be used to detect damage occurring in the inner PE layer. The efficiency of different signal characteristics used for structure evaluation is compared for various frequencies and durations of the excitation signal as well as feasibility of PZT sensor application for passive acquisition of acoustic emission signals is verified.

6 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
Rafał KozeraRafał Kozera
Rafał Kozera
Anna BoczkowskaAnna Boczkowska
Anna Boczkowska
Zuzanna D. KrawczykZuzanna D. Krawczyk
Zuzanna D. Krawczyk
PKPaulina Kozera
Paulina Kozera
MSMaciej Spychalski
Maciej Spychalski
Robert KosturekRobert Kosturek
Robert Kosturek
The main goal of this work was the evaluation of the interfacial strength of the carbon fibres/aluminium matrix interface dependently on the utilised composite fabrication method, namely high pressure die casting and gas pressure infiltration. In addition, the influence of a Ni-P coating on the C-fibres was investigated. The proposed measurements of the interfacial strength were carried out by means of the “push-out” method. The interfacial strength of the samples fabricated using the high-pressure infiltration method average between 19.03 MPa and 45.34 MPa.