Gabriel Prata

Dr. Gabriel Prata

University of Florida School of Forest Resources & Conservation
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2020 in Forest Science
Verified
Journal Article
Open access
PDF file
Andrew T. HudakAndrew T. Hudak
Andrew T. Hudak
AKAkira Kato
Akira Kato
BBBenjamin Bright
Benjamin Bright
ELE Louise Loudermilk
E Louise Loudermilk
CHChristie Hawley
Christie Hawley
David WeiseDavid Weise
David Weise
Methods to accurately estimate spatially explicit fuel consumption are needed because consumption relates directly to fire behavior, effects, and smoke emissions. Our objective was to quantify sparkleberry (Vaccinium arboretum Marshall) shrub fuels before and after six experimental prescribed fires at Fort Jackson in South Carolina. We used a novel approach to characterize shrubs non-destructively from three-dimensional (3D) point cloud data collected with a terrestrial laser scanner. The point cloud data were reduced to 0.001 m–3 voxels that were either occupied to indicate fuel presence or empty to indicate fuel absence. The density of occupied voxels was related significantly by a logarithmic function to 3D fuel bulk density samples that were destructively harvested (adjusted R2 = .32, P < .0001). Based on our findings, a survey-grade Global Navigation Satellite System may be necessary to accurately associate 3D point cloud data to 3D fuel bulk density measurements destructively collected in small (submeter) shrub plots. A recommendation for future research is to accurately geolocate and quantify the occupied volume of entire shrubs as 3D objects that can be used to train models to map shrub fuel bulk density from point cloud data binned to occupied 3D voxels.

2 November 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
RLRodrigo Leite
Rodrigo Leite
Carlos Alberto SilvaCarlos Alberto Silva
Carlos Alberto Silva
Midhun MohanMidhun Mohan
Midhun Mohan
ACAdrián Cardil
Adrián Cardil
Danilo AlmeidaDanilo Almeida
Danilo Almeida
Carine KlaubergCarine Klauberg
Carine Klauberg
Fast-growing Eucalyptus spp. forest plantations and their resultant wood products are economically important and may provide a low-cost means to sequester carbon for greenhouse gas reduction. The development of advanced and optimized frameworks for estimating forest plantation attributes from lidar remote sensing data combined with statistical modeling approaches is a step towards forest inventory operationalization and might improve industry efficiency in monitoring and managing forest resources. In this study, we first developed and tested a framework for modeling individual tree attributes in fast-growing Eucalyptus forest plantation using airborne lidar data and linear mixed-effect models (LME) and assessed the gain in accuracy compared to a conventional linear fixed-effects model (LFE). Second, we evaluated the potential of using the tree-level estimates for determining tree attribute uniformity across different stand ages. In the field, tree measurements, such as tree geolocation, species, genotype, age, height (Ht), and diameter at breast height (dbh) were collected through conventional forest inventory practices, and tree-level aboveground carbon (AGC) was estimated using allometric equations. Individual trees were detected and delineated from lidar-derived canopy height models (CHM), and crown-level metrics (e.g., crown volume and crown projected area) were computed from the lidar 3-D point cloud. Field and lidar-derived crown metrics were combined for ht, dbh, and AGC modeling using an LME. We fitted a varying intercept and slope model, setting species, genotype, and stand (alone and nested) as random effects. For comparison, we also modeled the same attributes using a conventional LFE model. The tree attribute estimates derived from the best LME model were used for assessing forest uniformity at the tree level using the Lorenz curves and Gini coefficient (GC). We successfully detected 96.6% of the trees from the lidar-derived CHM. The best LME model for estimating the tree attributes was composed of the stand as a random effect variable, and canopy height, crown volume, and crown projected area as fixed effects. The %RMSE values for tree-level height, dbh, and AGC were 8.9%, 12.1%, and 23.7% for the LFE model and improved to 7.3%, 7.1%, and 13.6%, respectively, for the LME model. Tree attributes uniformity was assessed with the Lorenz curves and tree-level estimations, especially for the older stands. All stands showed a high level of tree uniformity with GC values approximately 0.2. This study demonstrates that accurate detection of individual trees and their associated crown metrics can be used to estimate Ht, dbh, and AGC stocks as well as forest uniformity in fast-growing Eucalyptus plantations forests using lidar data as inputs to LME models. This further underscores the high potential of our proposed approach to monitor standing stock and growth in Eucalyptus—and similar forest plantations for carbon dynamics and forest product planning.

29 May 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MDMarcus Vinicio Neves d'Oliveira
Marcus Vinicio Neves d'Oliveira
Eben BroadbentEben Broadbent
Eben Broadbent
LOLuis C. Oliveira
Luis C. Oliveira
Danilo AlmeidaDanilo Almeida
Danilo Almeida
DPDaniel A. Papa
Daniel A. Papa
Marcelo Oliveira da CostaMarcelo Oliveira da Costa
Marcelo Oliveira da Costa
Tropical forests are often located in difficult-to-access areas, which make high-quality forest structure information difficult and expensive to obtain by traditional field-based approaches. LiDAR (acronym for Light Detection And Ranging) data have been used throughout the world to produce time-efficient and wall-to-wall structural parameter estimates for monitoring in native and commercial forests. In this study, we compare products and aboveground biomass (AGB) estimations from LiDAR data acquired using an aircraft-borne system in 2015 and data collected by the unmanned aerial vehicle (UAV)-based GatorEye Unmanned Flying Laboratory in 2017 for ten forest inventory plots located in the Chico Mendes Extractive Reserve in Acre state, southwestern Brazilian Amazon. The LiDAR products were similar and comparable among the two platforms and sensors. Principal differences between derived products resulted from the GatorEye system flying lower and slower and having increased returns per second than the aircraft, resulting in a much higher point density overall (11.3 ± 1.8 vs. 381.2 ± 58 pts/m2). Differences in ground point density, however, were much smaller among the systems, due to the larger pulse area and increased number of returns per pulse of the aircraft system, with the GatorEye showing an approximately 50% higher ground point density (0.27 ± 0.09 vs. 0.42 ± 0.09). The LiDAR models produced by both sensors presented similar results for digital elevation models and estimated AGB. Our results validate the ability for UAV-borne LiDAR sensors to accurately quantify AGB in dense high-leaf-area tropical forests in the Amazon. We also highlight new possibilities using the dense point clouds of UAV-borne systems for analyses of detailed crown structure and leaf area density distribution of the forest interior.

16 February 2022 in Drones
Verified
Journal Article
Open access
PDF file
Ana Paula Dalla CorteAna Paula Dalla Corte
Ana Paula Dalla Corte
ENErnandes M. da Cunha Neto
Ernandes M. da Cunha Neto
FRFRANCIEL REX
FRANCIEL REX
Deivison Venicio SouzaDeivison Venicio Souza
Deivison Venicio Souza
ABAlexandre Behling
Alexandre Behling
Eben BroadbentEben Broadbent
Eben Broadbent
Lidar point clouds have been frequently used in forest inventories. The higher point density has provided better representation of trees in forest plantations. So we developed a new approach to fill this gap in the integrated crop-livestock-forest system, the sampling forest inventory, which uses the principles of individual tree detection applied under different plot arrangements. We use a UAV-lidar system (GatorEye) to scan an integrated crop-livestock-forest system with Eucalyptus benthamii seed forest plantations. On the high density UAV-lidar point cloud (>1400 pts. m2), we perform a comparison of two forest inventory approaches: Sampling Forest Inventory (SFI) with circular (1380 m2 and 2300 m2) and linear (15 trees and 25 trees) plots and Individual Tree Detection (ITD). The parametric population values came from the approach with measurements taken in the field, called forest inventory (FI). Basal area and volume estimates were performed considering the field heights and the heights measured in the LiDAR point clouds. We performed a comparison of the variables number of trees, basal area, and volume per hectare. The variables by scenarios were submitted to analysis of variance to verify if the averages are considered different or equivalent. The RMSE (%) were calculated to explain the deviation between the measured volume (filed) and estimated volume (LiDAR) values of these variables. Additionally, we calculated rRMSE, Standard error, AIC, R2, Bias, and residual charts. The basal area values ranged from 7.40 m2 ha−1 (C1380) to 8.14 m2 ha−1 281 (C2300), about −5.9% less than the real value (8.65 m2 ha−1). The C2300 scenario was the only one whose confidence interval (CI) limits included the basal area real. For the total stand volume, the ITD scenario was the one that presented the closer values (689.29 m3) to the real total value (683.88 m3) with the real value positioned in the CI. Our findings indicate that for the stand conditions under study, the SFI approach (C2300) that considers an area of 2300 m2 is adequate to generate estimates at the same level as the ITD approach. Thus, our study should be able to assist in the selection of an optimal plot size to generate estimates with minimized errors and gain in processing time.

16 December 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Gabriel PrataGabriel Prata
Gabriel Prata
Eben BroadbentEben Broadbent
Eben Broadbent
Danilo AlmeidaDanilo Almeida
Danilo Almeida
JPJoseph St. Peter
Joseph St. Peter
JDJason Drake
Jason Drake
BWBenjamin Wilkinson
Benjamin Wilkinson
Unmanned aerial vehicles (UAV) allow efficient acquisition of forest data at very high resolution at relatively low cost, making it useful for multi-temporal assessment of detailed tree crowns and forest structure. Single-pass flight plans provide rapid surveys for key selected high-priority areas, but their accuracy is still unexplored. We compared aircraft-borne LiDAR with GatorEye UAV-borne LiDAR in the Apalachicola National Forest, USA. The single-pass approach produced digital terrain models (DTMs), with less than 1 m differences compared to the aircraft-derived DTM within a 145° field of view (FOV). Canopy height models (CHM) provided reliable information from the top layer of the forest, allowing reliable treetop detection up to wide angles; however, underestimations of tree heights were detected at 175 m from the flightline, with an error of 2.57 ± 1.57. Crown segmentation was reliable only within a 60° FOV, from which the shadowing effect made it unviable. Reasonable quality threshold values for LiDAR products were: 195 m (145° FOV) for DTMs, 95 m (110° FOV) for CHM, 160 to 180 m (~140° FOV) for ITD and tree heights, and 40 to 60 m (~60° FOV) for crown delineation. These findings also support the definition of mission parameters for standard grid-based flight plans under similar forest types and flight parameters.

13 January 2022 in Forests
Verified
Journal Article
Open access
PDF file
LMLukas Magee
Lukas Magee
KPKarun Pandit
Karun Pandit
SFS. Luke Flory
S. Luke Flory
RCRaelene Crandall
Raelene Crandall
Eben BroadbentEben Broadbent
Eben Broadbent
Daniel J. JohnsonDaniel J. Johnson
Daniel J. Johnson
Determining mechanisms of plant establishment in ecological communities can be particularly difficult in disturbance-dominated ecosystems. Longleaf pine (Pinus palustris Mill.) and its associated plant community exemplify systems that evolved with disturbances, where frequent, widespread fires alter the population dynamics of longleaf pine within distinct life stages. We identified the primary biotic and environmental conditions that influence the survival of longleaf pine in this disturbance-dominated ecosystem. We combined data from recruitment surveys, tree censuses, dense lidar point clouds, and a forest-wide prescribed fire to examine the response of longleaf pine individuals to fire and biotic neighborhoods. We found that fire temperatures increased with increasing longleaf pine neighborhood basal area and decreased with higher oak densities. There was considerable variation in longleaf pine survival across life stages, with lowest survival probabilities occurring during the bolt stage and not in the earlier, more fire-resistant grass stage. Survival of grass-stage, bolt-stage, and sapling longleaf pines was negatively associated with basal area of neighboring longleaf pine and positively related to neighboring heterospecific tree density, primarily oaks (Quercus spp.). Our findings highlight the vulnerability of longleaf pine across life stages, which suggests optimal fire management strategies for controlling longleaf pine density, and—more broadly—emphasize the importance of fire in mediating species interactions.