Witold Jan Wardal

Dr. Witold Jan Wardal

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2021 in Processes
Verified
Journal Article
Open access
PDF file
Wacław RomaniukWacław Romaniuk
Wacław Romaniuk
KMKamila Mazur
Kamila Mazur
Kinga BorekKinga Borek
Kinga Borek
Andrzej BorusiewiczAndrzej Borusiewicz
Andrzej Borusiewicz
WWWitold Jan Wardal
Witold Jan Wardal
Maciej KubonMaciej Kubon
Maciej Kubon
Modern and innovative dairy cattle breeding technologies are highly dependent on the level of mechanization. This article presents modern solutions for dairy cattle breeding, in particular, for livestock buildings, in which longitudinal development is possible in accordance with the farm’s needs as well as with obtaining additional energy from biogas and post-ferment for granulated organic fertilizer. In the analysed technology for milk production, methane fermentation, biogas yield, and the possibility of fertilizer production in the form of granules are considered. The presented modular cattle breeding technology includes sustainable production, which is economic; environmentally friendly, with preconditions in the facility including animal welfare; and socially acceptable, resulting from a high level of mechanization, which ensures both comfortable working conditions and high milk quality. The presented production line is an integral part of the milk production process with the possibility of organic fertilizer being used in the production of healthy food.

25 July 2024 in Energies
Verified
Journal Article
Open access
PDF file
WWWitold Jan Wardal
Witold Jan Wardal
KMKamila Mazur
Kamila Mazur
Jan BarwickiJan Barwicki
Jan Barwicki
MTMikhail Tseyko
Mikhail Tseyko
Most EU countries are trying to develop new sources of energy to meet local power requirements due to energy shortages. The most popular renewable energy developments include biogas stations, wind turbines, water turbines, and solar systems. This article focuses on reviewing studies concerning the utilization of solar energy systems, especially photovoltaic (PV) ones, in European countries such as Germany, Italy, Spain, and Poland, which are leaders in PV installations. The review identifies factors influencing the development of PV investments and the energy situation in these countries. Economic, market, environmental, and infrastructural barriers, as well as driving factors, are presented. In all countries, the majority of installations were in the prosumer sector, with only a very small percentage in the state-owned sector. The methodology of the study covered the mentioned barriers, which were identified using scientific databases such as Scopus, Web of Science, and branch organizations websites like the International Renewable Energy Agency (IRENA). The novelty of the article lies in its examination of special barriers concerning green energy production in chosen EU countries. Normally, when reading articles on PV installations, as presented in the References section, one primarily observes a description of the construction process without deep involvement in the presented ideas.

22 March 2021 in Agronomy
Verified
Journal Article
Open access
PDF file
PWPaweł Wierzchowski
Paweł Wierzchowski
JDJakub Dobrzyński
Jakub Dobrzyński
KMKamila Mazur
Kamila Mazur
MKMarek Franciszek Kierończyk
Marek Franciszek Kierończyk
WWWitold Jan Wardal
Witold Jan Wardal
JBJerzy Barszczewski
Jerzy Barszczewski
Acidified slurry is a novel organic fertilizer that limits gaseous ammonia emissions and reduces nitrogen losses. Our research aimed to determine the effects of short-term fertilization with acidified slurry on the chemical properties and bacterial community of soil used for maize cultivation. In the months after spreading, raw slurry fertilization had a significant impact on the increase in values of N-NO3. In contrast, soil fertilized with acidified slurry had lower N-NO3 values when compared to raw slurry fertilization treatments. Bacterial sequencing using Illumina MiSeq showed no differences in the genetic diversity of bacterial communities. In all tested soil samples, dominants at the phylum level were Actinobacteria, Proteobacteria, and Acidobacteria, while dominants at the class level were Actinobacteria, Alphaproteobacteria, Thermoleophilia, Gammaproteobacteria, and Acidimicrobiia. The values of biodiversity indices (Shannon index, Simpson index) in tested samples were similar. Our results suggest that short-term fertilization with acidified slurry does not adversely affect the biodiversity and structure of the bacterial communities and has a slight impact on soil chemical properties.

17 May 2021 in Environmental Monitoring and Assessment
Verified
Journal Article
Open access
PDF file
KMKamila Mazur
Kamila Mazur
KRKamil Krzysztof Roman
Kamil Krzysztof Roman
WWWitold Jan Wardal
Witold Jan Wardal
Kinga BorekKinga Borek
Kinga Borek
Jan BarwickiJan Barwicki
Jan Barwicki
MKMarek Franciszek Kierończyk
Marek Franciszek Kierończyk
The aim of the study was to present the scale of greenhouse gas emissions from animal production, and to provide test results from different housing systems. In three free stall buildings, two with slurry in deep channels and one with cattle in cubicles staying on shallow litter concentration of ammonia and carbon dioxide were measured in summer season by using dedicated equipment from Industrial Scientific Research. Air exchange was calculated on the base of balance carbon dioxide method. This method was used in order to estimate the air flow rate. Concentrations of ammonia and CO2 were measured as the base for air exchange and ammonia emission rates. Ammonia emissions were product of ammonia concentration and air exchange rate. Temperature and relative humidity were measured to establish microclimate conditions in buildings tested to show the overall microclimatic situation in buildings. Differences between ammonia emission rates were observed in both housing systems. The highest ammonia emission rate was equal to 2.75 g·h−1·LU−1 in well-ventilated cattle barn with the largest herd size.

8 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
Wacław RomaniukWacław Romaniuk
Wacław Romaniuk
IRIvan Rogovskii
Ivan Rogovskii
VPVictor Polishchuk
Victor Polishchuk
LTLiudmyla Titova
Liudmyla Titova
Kinga BorekKinga Borek
Kinga Borek
KRKamil Krzysztof Roman
Kamil Krzysztof Roman
The urgency of the study is due to the need to increase the productivity of biogas plants by intensifying the process of methane fermentation of cattle manure in mesophilic mode by adding to it the waste from biodiesel production: crude glycerine. To substantiate the rational amount of crude glycerine in the substrate, the following tasks were performed: determination of dry matter, dry organic matter, and moisture of the substrate from cattle manure with the addition of crude glycerine; conducting experimental studies on biogas yield during fermentation of cattle manure with the addition of crude glycerine with periodic loading of the substrate; and development of a biogas yield model and determination of the rational composition of crude glycerine with its gradual loading into biogas plants with cattle manure. The article presents the results of research on fermentation of substrates in a laboratory biogas plant with a useful volume of 30 L, which fermented different proportions of crude glycerine with cattle manure at a temperature of 30 °C, 35 °C, and 40 °C. The scientific novelty of the work is to determine the patterns of intensification of the process of methane fermentation of cattle manure with the addition of different portions of crude glycerine. A rapid increase in biogas yield is observed when the glycerol content is up to 0.75%. With the addition of more glycerine, the growth of biogas yield slows down. The digester of the biogas plant, where experimental studies were conducted on the fermentation of substrates based on cattle manure with the addition of co-substrates, is suitable for periodic loading of the substrate. As a rule, existing biogas plants use a gradual mode of loading the digester. Conducting experimental studies on biogas yield during fermentation of cattle manure with the addition of crude glycerine with periodic loading of the substrate makes it possible to build a mathematical model of biogas yield and determine the rational composition (up to 0.75%) of crude glycerine with its gradual loading in biogas plants. Adding 0.75% of crude glycerine to the substrate at a fermentation temperature of 30 °C allows to increase the biogas yield by 2.5 times and proportionally increase the production of heat and electricity. The practical application of this knowledge allows the design of an appropriate capacity of the biogas storage tank (gasholder).

20 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
WWWitold Jan Wardal
Witold Jan Wardal
KMKamila Mazur
Kamila Mazur
KRKamil Krzysztof Roman
Kamil Krzysztof Roman
Michał RomanMichał Roman
Michał Roman
MMMarcin Majchrzak
Marcin Majchrzak
The increasing popularity of automated systems and the increased market share of producers of robotic feeding equipment for cows causes the need for a deeper study of energy demand in such technologies. This article provides an analysis of the inputs of energy accumulated in conventional (CFS) and automated feeding systems (AFS) for cattle. The aim of this is to determine the impact of robotic technologies for the preparation and feeding of fodder on the cumulative energy inputs. The aim of this paper is to investigate the effect of machinery and the equipment applied to the cumulative energy intensity in cattle farming facilities. The cumulative energy consumption for four technologies of automated cattle feeding (AFS) was tested and compared to the energy consumption for six technologies with a conventional feeding system (CFS). The research involved nine cow barn facilities for dairy cows and one for beef cattle. An evaluation has been made for cattle farming structures (milk and meat production) with various mixing and feeding systems for feeds of various concentrations, and keeping system (tied system and free-stall). The cow barns differed in feed mixing, feeding machinery, and equipment. Measurements of live labor inputs and the consumption of electric and mechanical energy carriers were carried out, and the mass of various types of machines and devices with software was taken into account, which became the basis for calculating cumulative energy consumption for individual technologies. The obtained average of electric and mechanical energy inputs for robotic technologies of feeding fodder (AFS) was 0.60025 kWh∙day−1∙LU−1(where LU means Large Animal Unit 500 kg), and it was 39.3% lower than for conventional technologies (CFS) where it was 0.989052 kWh∙day−1∙LU−1. However, taking into account all components of cumulative energy consumption, the average for the group of robotic technologies (AFS) was higher by 35.18% than for conventional technologies (CFS).