In this work, polymer nanocomposite films based on poly(L-lactic acid) (PLLA) were reinforced with mesoporous silica nanoparticles, mesoporous cellular foam (MCF) and Santa Barbara amorphous-15 (SBA). PLLA is a biobased aliphatic polyester, that possesses excellent thermomechanical properties, and has already been commercialized for packaging applications. The aim was to utilize nanoparticles that have already been established as nanocarriers to enhance the mechanical and thermal properties of PLLA. Since the introduction of antibacterial properties has become an emerging trend in packaging applications, to achieve an effective antimicrobial activity, micro/nano 3D micropillars decorated with cone- and needle-shaped nanostructures were implemented on the surface of the films by means of thermal nanoimprint lithography (t-NIL), a novel and feasible fabrication technique with multiple industrial applications. The materials were characterized regarding their composition and crystallinity using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD), respectively, and their thermal properties using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their mechanical properties were examined by the nanoindentation technique, while the films’ antimicrobial activity against the bacteria Escherichia coli and Staphylococcus aureus strains was tested in vitro. The results demonstrated the successful production of nanocomposite PLLA films, which exhibited improved mechanical and thermal properties compared to the pristine material, as well as notable antibacterial activity, setting new groundwork for the potential development of biobased smart packaging materials.

Polymers from renewable feedstocks are receiving increasing attention as the awareness about environmental issues derived from petroleum exploitation and waste accumulation is growing. With unsaturated polyester resins being one of the most used classes of polymers worldwide, the utilization of biobased monomers for manufacturing is more relevant than ever. In the present work, succinic acid, one of the most promising biobased building blocks, was incorporated in the structure of the resins in question to increase their biobased content. By reacting with ethylene glycol (EG) or poly(ethylene glycol) and maleic anhydride (MA) at several molar rations, unsaturated polyester resins (UPRs) were prepared. Their synthesis was evaluated by a variety of spectroscopical techniques, and their rheological properties made use of the reactive diluent mandatory for facilitating processing. Thus, in a second stage acrylic acid (AA) was used as cross-linking agent in the present of initiators and accelerators producing thermosetting resins. Differential scanning calorimetry (DSC) was employed to screen the cross-linking procedure, whereas with X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) it was proven that thermosetting resins were prepared. The thermal stability of the cured materials was evaluated by thermogravimetric analysis (TGA).

Olive fruit fly Dacus oleae is a well-known pest infecting the bark of olive fruit, leading to reduction of extracted olive oil properties. Among chemicals proposed for Dacus oleae population control, pheromone 1,7-dioxaspiro(5.5)undecane (DSU), Dacus pheromone, is considered as a promising agent, which is added in several traps. However, all proposed systems manage to sufficiently deliver DSU for only two weeks. Furthermore, an additional problem is the limited available amount of pheromone to use in such systems. To overcome this, in the present study, a novel synthetic procedure of DSU is described, including only five steps. Intermediate products were studied by High Resolution Mass Spectroscopy Electrospray Ionization (HRMS-ESI) (m/z), while the resulting DSU was further characterized by ¹H and ¹³C-NMR. Synthesized DSU was further encapsulated in poly(L-lactic acid) (PLLA) microparticles in three different concentrations; 5, 10 and 20% w/w. Its successful incorporation was studied by FT-IR, XRD and differential scanning calorimeter (DSC) while two procedures, liquid extraction and solid phase microextraction, followed by GC-MS analysis, was used for quantification of pheromone to microparticles. It was found that microparticles loading was over 85% for all three formulations. Its release showed a prolonged profile for microparticles containing 20% w/w DSU, lasting four weeks, while the quantity of DSU released reached 100%. These microparticles could be appropriate to control Dacus oleae population.

In this work, we present the fabrication of low-cost, stable nanocellulose colloidal suspensions with an average particle size of approximately 160 nm, produced via a straightforward, solvent-free ultrasonication process that eliminates the need for corrosive chemicals or energy-intensive mechanical treatments. The resulting nanocellulose suspensions were utilized as reinforcing additives in urea-formaldehyde (UF) resins, which were subsequently applied in the production of particle boards. This approach addresses the increasing EU regulatory constraints regarding low formaldehyde-to-urea (F/U) molar ratios and the broader need for biobased, eco-friendly alternatives in the wood adhesive industry. Mechanical testing of the nanocellulose reinforced boards revealed notable improvements in the internal bond strength and modulus of rupture, along with a significant decrease in formaldehyde release compared to boards produced with conventional UF resins. These findings highlight the potential of ultrasonication-derived nanocellulose as an environmentally friendly, cost-effective additive to enhance the mechanical performance and reduce the environmental impact of UF-based wood composites.