The rising climate change concerns over the excessive exploitation of non-renewable sources have necessitated the need for alternative renewable and eco-friendly resources for the production of innovative materials, achieving the targets of bioeconomy. Lignocellulosic biomass (LB) constituted by polymeric sugars and lignin is an abundantly available plant-based renewable material in the form of agro-industrial food waste and crop residues that can be exploited for the production of an array of value-added chemicals and bioproducts. Cellulose is the most abundant natural and biodegradable organic polymer on earth derived from LB, with wide scale applications in the lignocellulosic biorefineries and food industries. The negative effects of food waste from agro-industrial activities could be reduced through the recovery of cellulose from these wastes and converting it into valuable forms. However, the extraction of cellulose from LB is a difficult task owing to the recalcitrant nature of biomass that restricts the easy accessibility of cellulose for value addition. Therefore, a suitable cellulose extraction method through the fractionation of LB is necessary for a better cellulose yield. Furthermore, owing to the enormous potential of nanocellulose (NC), researchers are keenly interested in developing ecologically acceptable cellulose extraction methods. Cellulose nanofibrils and nanocrystals confer excellent mechanical properties, non-toxic characteristics and biodegradability, due to which they possess wide-scale applications in diverse industrial sectors. The current review emphasizes the potential role of cellulose extraction and NC production from agro-food waste. The different pretreatment methods for their extraction from LB are outlined. The applications of nanocellulose in different areas are also discussed. The review also highlights the recent trends, challenges and future directions in the development of cellulose and NC-based commercial products.
D-limonene (LIM) is a common monoterpene compound, principally found in citrus essential oils. This study investigated the anti-obesity effect of LIM on the 5′-adenosine monophosphate (AMP)-activated protein kinase (AMPK) signaling pathway in 3T3-L1 adipocytes and high-calorie diet-induced obese rats and confirmed the optimally effective dose of LIM. The 3T3-L1 adipocytes were treated with 0.05–0.4 mg/mL LIM for 10 days and oil red O and triglyceride (TG) content were used to determine the levels of lipid accumulation. The results showed that more than 0.05 mg/mL LIM inhibited lipid accumulation by reducing oil red O in 3T3-L1 adipocytes. Masses of 0.2 and 0.4 mg/mL LIM also decreased the TG contents in 3T3-L1 adipocytes. On the other hand, Wistar rats were given high-calorie diets, combined with LLIM (154 mg/kg) and HLIM (1000 mg/kg) treatments, for 16 weeks. The result shows that LLIM and HLIM decreased body weight, total fat tissue weight, and serum low-density lipoprotein-cholesterol (LDLc) levels. HLIM reduced serum TG and increased serum lipase and high-density lipoprotein-cholesterol (HDLc) levels. Moreover, the anti-obesity metabolic pathway showed that LIM (>0.05 mg/mL) in 3T3-L1 adipocytes and LIM (>154 mg/kg) in high-calorie diet-induced obese rats could activate the AMPK signaling pathway. The activated AMPK regulated the mRNA expression related to adipogenesis (PPARγ, C/EBPα, FABP4), lipogenesis (SREBP-1c, ACC, FAS), and lipolysis (ATGL, HSL) to inhibit obesity. This finding demonstrates that LIM has anti-obesity properties. Namely, it is seen that LIM acts by regulating the AMPK signaling pathway in 3T3-L1 adipocytes and high-calorie diet-induced obese rats. In terms of dose–response, LIM (154 mg/kg) would be an optimal effective dose for anti-obesity induced by a high-calorie diet.
The qualitative and quantitative analysis of 16 polycyclic aromatic hydrocarbons (PAHs) in sludge samples from drinking water treatment plants (DWTP) and wastewater treatment plants (WWTP) were established using gas chromatography–mass spectrometry (GC-MS). The method was suitable to quantify PAHs in the sludge of DWTP and WWTP and it was confirmed by the relevant quality assurance/quality control (QA/QC) procedures. The recovery of individual PAHs in the spiked samples ranged from 74.3% to 108.7%. Detection limits of the analytical procedure were 0.0010–0.0046 mg/kg dw for individual PAHs. This method was used to determine the concentration of PAHs in the selected two DWTP and four WWTP sludge samples. The results showed that the total PAHs (∑PAHs) were in low levels which ranged from 0.0668 to 0.1357 mg/kg dw, and 0.5342–1.0666 mg/kg dw for DWTP and WWTP respectively. The 3- & 4-ring PAHs were predominant in DWTP sludge, ranging from 77.4% to 82.7%; the 4-ring PAHs were predominant in WWTP sludge, ranging from 40.7% to 47.6%. The PAHs of DWTP sludge are mainly composed of 3-ring phenanthrene and anthracene and 4-ring pyrene, and chrysene. The PAHs of WWTP sludge are dominated by 4-ring fluoranthene, pyrene, and chrysene. The detected PAHs concentration should be undoubtedly considered for agriculture in sludge applications based on the limits of the EU regulations. The results of this study can be used for regular monitoring to establish a reference for sludge management and application to agriculture.
About Me
Shu-Ling Hsieh is one of the staff of the National Kaohsiung University of Science and Technology.
Shu-Ling Hsieh is one of the staff of the National Kaohsiung University of Science and Technology.