C.N. Aiza Jaafar

Dr. C.N. Aiza Jaafar


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2020 in Polymers
Verified
Journal Article
Open access
PDF file
ARA. Rozilah
A. Rozilah
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
Mohd Sapuan SalitMohd Sapuan Salit
Mohd Sapuan Salit
IZIsmail Zainol
Ismail Zainol
Ahmad Ilyas RushdanAhmad Ilyas Rushdan
Ahmad Ilyas Rushdan
Antibacterial sugar palm starch biopolymer composite films were developed and derived from renewable sources and inorganic silver nanoparticles (AgNPs) as main ingredients for antibacterial coatings. The composite films were produced by solution casting method and the mechanical and physicochemical properties were determined by tensile test, Fourier Transform Infrared (FTIR) analysis, thermal gravimetric analysis (TGA), antibacterial screening test and field emission scanning electron microscopy (FESEM) images. It was found that mechanical and antibacterial properties of biocomposite films were improved after the addition of AgNPs compared with the film without active metals. The weakness of neat biocomposite films was improved by incorporating inorganic AgNPs as a nanofiller in the films’ matrix to avoid bacterial growth. The results showed that the tensile strength ranged between 8 kPa and 408 kPa and the elasticity modulus was between 5.72 kPa and 9.86 kPa. The addition of AgNPs in FTIR analysis decreased the transmittance value, caused small changes in the chemical structure, caused small differences in the intensity peaks, and produced longer wavelengths. These active films increased the degradation weight and decomposition temperature due to the more heat-stable AgNPs. Meanwhile, the average inhibited areas measured were between 7.66 and 7.83 mm (Escherichia coli), 7.5 and 8.0 mm (Salmonella cholerasuis), and 0.1 and 0.5 mm for Staphylococcus aureus. From the microscopic analysis, it was observed that the average size of all microbes for 1 wt% and 4 wt% AgNPs ranged from 0.57 to 2.90 mm. Overall, 3 wt% AgNP nanofiller was found to be the best composition that fulfilled all the mechanical properties and had better antimicrobial properties. Thus, the development of an organic-inorganic hybrid of antibacterial biopolymer composite films is suitable for antibacterial coatings.

15 May 2021 in Metals
Verified
Journal Article
Open access
PDF file
HSHuda Sabbar
Huda Sabbar
ZLZulkiflle Leman
Zulkiflle Leman
BSBIN Shamsudin
BIN Shamsudin
STsuraya mohd tahir
suraya mohd tahir
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
SASami Alalimi
Sami Alalimi
Solid-state recycling is a direct conversion method for producing metal chips, whereas the materials are plastically deformed into the final product without melting, offering lower energy consumption and metal waste. This technique was reported for fabricating aluminium-zirconium oxide (Al-ZrO2) composite and it was widely used to avoid metal chips bounding at high temperatures during the extrusion process. Aluminium alloy (AA7075) is known for its high yield strength of more than 500 MPa under optimum ageing conditions. However, AA7075 can be further reinforced by zirconium oxide nanoparticles when needed for high-performance applications. Hot extrusion is used to obtain better mechanical properties of composite materials. The equal channel angular pressing (ECAP), a severe plastic deformation technique, was recently used to produce bulk and light recycled metal chips, such as porosity-free and ultra-fine-grained aluminium nanocomposites (ANCs). Heat treatments (HT) and ECAP post hot extrusion are mostly incorporated to improve tribological and mechanical properties and aluminium nanocomposite bonding efficiency. In this review, ANCs’ fabrication by the hot extrusion technique and the effects of ZrO2 nanoparticle are duly summarised and discussed. Furthermore, this review emphasises the importance of using HT and ECAP techniques to acquire better metal alloy incorporation, such as AA7075-ZrO2. Interestingly, owing to the lightweight properties and superior performance of AA7075-ZrO2, it was reported to be suitable for fabricating many drones’ parts, military equipment, and some other promising applications.

8 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
IZIsmail Zainol
Ismail Zainol
MKM. I. Izyan Khairani
M. I. Izyan Khairani
TDTemitope Dele-Afolabi
Temitope Dele-Afolabi
The effects of filler loading and silane coupling agent on the properties of hydroxyapatite (HAp)-filled high density polyethylene (HDPE) composites have been studied. The (HAp) powder was successfully produced from tilapia scales using the spray drying process utilized to prepare the HDPE/HAp composites. The FTIR peaks for the untreated HDPE/30HAp composite corresponded to the functional groups of HDPE (C-CH3) and –CH2 and HAp (PO4−3 and O-H). The FTIR spectrum for the silane-treated composite showed that the C=O and silanol groups were eliminated, which strongly confirms the chemical interaction between the HAp fillers and the HDPE matrix. The developed composites demonstrated enhanced mechanical performance, and in particular the treated HDPE/30HAp-S composite exhibited superior tensile strength, Young’s modulus and flexural modulus of 28.26 MPa, 1272 MPa and 796 MPa, respectively. In vitro cytotoxicity analysis showed that the developed composites were non-toxic and have great potential to be used for biomedical application.

15 August 2021 in Coatings
Verified
Journal Article
Open access
PDF file
MMMuntadher Msebawi
Muntadher Msebawi
ZLZulkiflle Leman
Zulkiflle Leman
BSBIN Shamsudin
BIN Shamsudin
STsuraya mohd tahir
suraya mohd tahir
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
MRMohammed H. Rady
Mohammed H. Rady
Hybrid composites are obtained by embedding multiple micro and nano reinforcements into the matrix materials. These hybrid composites are helpful to obtain the useful properties of matrix and reinforcement materials. Aluminum matrix is one the most common matrix materials due to its excellent thermal and electrical properties. This review covers various aspects of nanoparticle-reinforced Al hybrid composites. Solid-state recycling of Al only consumes around 5% of the energy utilized in the conventional extraction and recycling methods. This review revolves around the induction of silica and copper oxide nanoparticles into the solid-state recycled Al matrix material to form the hybrid composite. These nanoparticles enhance stiffness, toughness, and high temperature stability for Al hybrid composites. A detailed analysis was carried out for AA6061-grade Al matrix materials along with the silica and copper oxide nanoparticles. The present work focused on the effects of nano silica and nano copper oxide particle reinforcements on Al-based composite manufactured via hot extrusion process. The composite fabrication through solid-state recycling is discussed in detail. A detailed analysis for the effects of volume fraction and wt.% of CuO and SiO2 reinforcement particles was carried out by various characterization techniques. A detailed comparison in terms of mechanical performance of Al-based composites with the addition of nano silica and nano copper oxide particles is presented here to investigate the efficiency and performance of these particles.

11 November 2022 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
SKSivasanghari Karunakaran
Sivasanghari Karunakaran
DMDayang Laila Majid
Dayang Laila Majid
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
MIMuhammad Hussain Ismail
Muhammad Hussain Ismail
HIHusam Yahya Imran
Husam Yahya Imran
Shape Memory Alloy (SMA) possess memory capability to revert its original shape when exposed to load or temperature changes. This unique thermomechanical property occurs during solid state phase transformations which corresponds to functional properties of SMA, shape memory effect (SME) and super elasticity (SE). The significant coupling behaviour of SMA can be utilized as actuator in aerospace, automotive, electrical and civil fields. However, in practical applications, the coupling behaviour of SMA are non-linear and hysteretic. The control mechanism of SMA coupling behaviour is complex. Therefore, in order to achieve good control of thermomechanical properties, a highly controllable and promising heating technique is required. Thus, this paper reviewed the existing heating techniques for the SMA intending to find a controllable heating technique for the SMA. Besides that, this review suggested the promising induction heating for SMA thermomechanical characterization which offer temperature controllability and faster heating capability. However, till date most of research works are purely empirical. The present paper is able to provide an insight on the experimental approaches toward induction heating of SMA. Thus, the main aim of this paper is to provide a better understanding on the heating mechanism of SMA to develop an optimized utilization of SMA as an actuator.

12 November 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
TMTAMIL MOLI
TAMIL MOLI
Mohamed Thariq SultanMohamed Thariq Sultan
Mohamed Thariq Sultan
QAQumrul Ahsan
Qumrul Ahsan
Mohammad JawaidMohammad Jawaid
Mohammad Jawaid
NJNaveen Jesuarockiam
Naveen Jesuarockiam
CJC.N. Aiza Jaafar
C.N. Aiza Jaafar
This research focuses on evaluating the effect of Cyrtostachys renda (CR) fiber and the impact of adding multi-walled carbon nanotubes (MWCNT) on the morphological, physical, mechanical, and flammability properties of phenolic composites. MWCNT were supplemented with phenolic resin through a dry dispersion ball milling method. Composites were fabricated by incorporating CR fiber in 0.5 wt.% MWCNT-phenolic matrix by hot pressing. Nevertheless, the void content, higher water absorption, and thickness swelling increased with fiber loading to the MWCNT/phenolic composites. The presence of MWCNT in phenolic enhanced the tensile, flexural, and impact strength by as much as 18%, 8%, and 8%, respectively, compared to pristine phenolic. The addition of CR fiber, however, strengthened MWCNT-phenolic composites, improving the tensile, flexural, and impact strength by as much as 16%, 16%, and 266%, respectively, for 50 wt.% loading of CR fiber. The CR fiber may adhere properly to the matrix, indicating that there is a strong interface between fiber and MWCNT-phenolic resin. UL-94 horizontal and limiting oxygen index (LOI) results indicated that all composite materials are in the category of self-extinguishing. Based on the technique for order preference by similarity to the ideal solution (TOPSIS) technique, 50 wt.% CR fiber-reinforced MWCNT-phenolic composite was chosen as the optimal composite for mechanical and flammability properties. This bio-based eco-friendly composite has the potential to be used as an aircraft interior component.