Microplastics have become one of the most serious environmental hazards today, raising fears that concentrations will continue to rise even further in the near future. Micro/nanoparticles are formed when plastic breaks down into tiny fragments due to mechanical or photochemical processes. Microplastics are everywhere, and they have a strong tendency to interact with the ecosystem, putting biogenic fauna and flora at risk. Polyester (PET) and polyamide (PA) are two of the most important synthetic fibres, accounting for about 60% of the total world fibre production. Synthetic fabrics are now widely used for clothing, carpets, and a variety of other products. During the manufacturing or cleaning process, synthetic textiles have the potential to release microplastics into the environment. The focus of this paper is to explore the main potential sources of microplastic pollution in the environment, providing an overview of washable polyester materials.

This paper investigates a textile material of low surface mass for its protection against electromagnetic radiation (EMR), which is suitable for composite structures of garments, and for technical and interior applications. The shielding effectiveness against EMR of fabric knitted from polyamide threads coated with silver, measured in the frequency range of 0.9 GHz to 2.4 GHz, indicated a high degree of protection. The key contribution of the paper is the evaluation of the stability of the shielding properties against EM radiation after applying apolar and polar solvents, in synergy with the cyclic process parameters of wet and dry cleaning. The results of the study confirmed the decline in the shielding effectiveness after successive cycles of material treatment with dry and wet cleaning. The effect of wet cleaning in relation to dry cleaning is more apparent, which is due to the damage of the silver coating on the polyamide threads in the knitted fabric.

Proban^® is a multiphase treatment of cotton fabrics based on the formation of pre-condensates using the flame retardant (FR) agent tetrakis (hydroxymethyl) phosphonium salts (THPx). The assessment of the durability of a product demands a preliminary understanding of how relevant it is to extend its lifetime. It is therefore important to minimize the risk of agents impacting: (1) the protection level, (2) shape and dimensions, and (3) additional comfort characteristics of the fabric. This research focused on the impact of washing conditions on the durability of FR properties and appearance of Proban^® cotton fabrics, which was systematically arranged through the variation in the chemistry distribution in the Sinner’s circle. The chemical share was varied in laboratory conditions as a simulation of industrial washing based on component dosing, where the temperature, time and mechanical agitation were constant. The washing of cotton fabrics was performed through 10 cycles in four baths containing high alkali components, medium alkali components, high alkali reference detergent and water. The environmental acceptability of washing procedures through effluent analysis was assessed by physico–chemical and organic indicators. The limited oxygen index (LOI), calorimetric parameters (micro combustion calorimetry), thermal stability and evolved gases during thermal decomposition (thermogravimetric analyzer (TGA) coupled with an infrared spectrometer (TG–IR)), surface examination (FE-SEM), spectral characteristics and pH of the aqueous extract of the fabrics before and after 10 washing cycles were selected for proof of durability. The medium alkali bath was confirmed as a washing concept for Proban^® cotton fabric through the preservation of FR properties examined through LOI, TGA, TG–IR and MCC parameters and appearance color and low level of fibrillation.

This research is focused on cellulose and starch derivatives, carboxymethyl cellulose (CMC) and carboxymethyl starch (CMS), added to the detergent in washing reference cotton fabric in soft and hard water at 40, 60 and 90 °C. The applied polymers were analyzed through the potential of surface cellulose modification and inhibition of stain transfer from standard stain donors to modified and initial cotton fabrics. The surface modification of the cotton fabrics, characterized by the zeta potential and amounts of deposits, was coupled with the cluster analysis as well as a whiteness assessment. The obtained results of the zeta potential and degree of whiteness of the reference cotton fabrics before and after washing showed differences between CMC and CMS. The appropriateness of the cluster analysis was confirmed in assessing the potential of applied polymers for surface modification of cotton fabrics and greying inhibition.

From the textile manufacturers’ point of view, coarse and medullated fibers are undesirable in the production of fine woolen materials, but highly desirable in the production of textiles and yarns with special effects, especially in carpet production. For sustainability, the entire sheep fleece should be used, including the coarse and medullated fibers. The raw wool must be scoured to obtain clean wool fibers without damage or excessive fiber entanglement, with a certain moisture content, low dirt content and residual grease for further processing, and proper color. In order to remove the impurities in raw wool with maximum efficiency, save energy and minimize the environmental impact, this study investigated the changes in some fiber properties during the scouring process due to the effect of the enzyme complex on coarse wool fibers. The effects were studied through the amount of clean wool fibers and impurities within the fleece, the fiber diameter and color. Conventional and enzyme scoured coarse wool were bleached with an unconventional bleaching agent, percarbonate, and compared to bleaching with hydrogen peroxide to achieve higher whiteness and brilliant color with minimal fiber property changes. The changes after the bleaching process were determined based on the sorption of moisture and dyes and the color parameters. The bio-innovative pretreatment with enzyme complex scouring and percarbonate bleaching resulted in excellent fiber properties even for coarse wool. SEM analysis was performed to confirm these results. Taking into account the sustainability of the process and environmental protection, enzyme complex scouring and percarbonate bleaching are recommended as pretreatment processes for raw coarse wool.

The research deals with functionalization of a standard polyester fabric with biopolymer chitosan, whose premises are multifunctional and favour ecological effects. Due to the incompatibility of synthetic and natural polymers, the chitosan treatment was preceded by alkaline hydrolysis with sodium hydroxide with the addition of cationic and anionic surfactants as promoters. Compatibility of the chitosan with untreated and alkali-hydrolyzed fabrics was performed by analysis of mechanical and physico-chemical properties. The number of characterisation procedures performed required the use of hierarchical cluster analysis (HCA) to identify homogeneous groups or clusters in which similarities and differences between samples are visible. Almost all applied methods and evaluation parameters have shown that alkaline hydrolysis of polyester fabric has the best potential for functionalization with chitosan. Therefore, the addition of surfactants as promoters during alkaline hydrolysis is not necessary in the pretreatment process phase.