This research is focused on cellulose and starch derivatives, carboxymethyl cellulose (CMC) and carboxymethyl starch (CMS), added to the detergent in washing reference cotton fabric in soft and hard water at 40, 60 and 90 °C. The applied polymers were analyzed through the potential of surface cellulose modification and inhibition of stain transfer from standard stain donors to modified and initial cotton fabrics. The surface modification of the cotton fabrics, characterized by the zeta potential and amounts of deposits, was coupled with the cluster analysis as well as a whiteness assessment. The obtained results of the zeta potential and degree of whiteness of the reference cotton fabrics before and after washing showed differences between CMC and CMS. The appropriateness of the cluster analysis was confirmed in assessing the potential of applied polymers for surface modification of cotton fabrics and greying inhibition.
The research deals with functionalization of a standard polyester fabric with biopolymer chitosan, whose premises are multifunctional and favour ecological effects. Due to the incompatibility of synthetic and natural polymers, the chitosan treatment was preceded by alkaline hydrolysis with sodium hydroxide with the addition of cationic and anionic surfactants as promoters. Compatibility of the chitosan with untreated and alkali-hydrolyzed fabrics was performed by analysis of mechanical and physico-chemical properties. The number of characterisation procedures performed required the use of hierarchical cluster analysis (HCA) to identify homogeneous groups or clusters in which similarities and differences between samples are visible. Almost all applied methods and evaluation parameters have shown that alkaline hydrolysis of polyester fabric has the best potential for functionalization with chitosan. Therefore, the addition of surfactants as promoters during alkaline hydrolysis is not necessary in the pretreatment process phase.
The influence of 3, 10 and 50 washing cycles on the properties of cotton fabric and cotton-polyester blend in plain weave, was investigated in this study. In addition to the analysis of tensile properties in weft and warp directions and thickness, the number of particles produced in the dry state was also measured after 3, 10 and 50 washes. After washing, the entire effluent was analysed by determining the total suspended solids (TSS), the total solids (TS), the pH value and the conductivity. To determine the similarity of the observed wash cycles and properties of all processed samples, hierarchical cluster analysis (HCA) was performed. The fabric changes indicated by total wear in the warp direction after 50 washing cycles compared to unwashed ones amounting to 41.2% for cotton and 30.9% for cotton-polyester blend, may be attributed to the synergy of washing factors and raw material composition. Cotton fabric produced significantly more particles than cotton-polyester fabric in the dry state after the examined washing cycles in all size categories. A smaller number of released particles are in the larger size category >25 μm. The obtained TSS values confirm the degree of loading of the effluent with particulate matter from the analysed fabrics, since the detergent consists of water-soluble components. The HCA dendrograms confirmed that the release of particles during the first washing cycles is mainly determined by the structural properties of fabrics, while in the subsequent cycles the synergistic effect of chemical, mechanical and thermal effects in the interaction with the material prevailed.
The dominant type of polymer particles in water, sediment, and various organisms partly derives from natural and synthetic fibres released in the washing process. Pollution of aquatic recipients with these particles poses an interdisciplinary problem throughout the world. Wastewater from washing represents a dispersion system with different particle sizes that is also loaded with the source of the particles. Due to this complex system, the qualification and quantification of this type of pollution is difficult. In this paper, the laser diffraction technique was applied to characterize particles in effluents from washing and rinsing materials made of a mixture of cotton and polyester. The results obtained through the analysis prove that the laser diffraction technique is acceptable for the characterization of a composite effluent sample. The advanced statistical technique of multivariate analysis confirmed the interrelationship of the parameters of this complex dispersion system.
Research on the sources of microplastics (MP) in the environment and the parameters that lead to the loss of microfibers from synthetic textiles during washing have recently attracted public attention. Considering the involvement of a variety of structural and process parameters, it is important to choose methods for quantifying fibers as MP pollutants that migrated during the washing process. In the research to date, various sampling techniques and analytical protocols for the identification of polymers from washed synthetic textiles have been applied. In the present research, pyrolysis coupled with gas chromatography and mass spectrometry (Py-GC/MS), was applied to verify the composition of the filter residue isolated from washing and rinsing effluents. A comparison with bases of polymeric materials has proven the presence of potential environmental pollutants in the form of microfibers released during the washing process. The investigation confirmed that fragments of cotton cellulose residues predominate in relation to polyester. Based on the list of identified compounds generated by Py-GC/MS results and their retention times the multivariate data analysis proved the influence in the bath composition.
The existing research deals with the process of modifying polyester knitted fabrics and polyester/cotton knitted fabrics with chitosan and the stability of functionalized surface with chitosan in the washing process according to a standard and an innovative washing procedure. The current research concept aims to evaluate the degree of progressivity and progressiveness: the modification of polyester knitted fabrics with chitosan and an innovative washing process. The polyester and polyester/cotton fabrics modified with chitosan were characterized by a staining test, microscopic analysis, zeta potential measurement, and pilling tendency of the knitted fabrics before and after five and ten washing cycles with reference detergent ECE A. The results of the zeta potential measurement of knitted fabrics functionalized with chitosan confirmed cationization of the polyester and polyester/cotton fabric with chitosan. The presence of chitosan on the washed knitted fabrics in reduced quantities is demonstrated by the staining test, the colour strength (K/S), and the zeta potential values. The staining test and surface charge of the tested knitted fabrics confirmed the research hypothesis regarding the degree of progressivity of the modification of polyester and polyester/cotton knitted fabrics with chitosan and the sustainability of the innovative washing process. The streaming potential proved to be a favorable method for monitoring the stability of chitosan in the washing process in combination with a staining test with the selected dye Remazol Red RB.