Analgesics and nonsteroidal anti-inflammatory drugs (NSAIDs) such as paracetamol, diclofenac, and ibuprofen are frequently encountered in surface and ground water, thereby posing a significant risk to aquatic ecosystems. Our study reports the catalytic performances of nanosystems TiO2-MexOy (Me = Ce, Sn) prepared by the sol-gel method and deposited onto glass slides by a dip-coating approach in the removal of paracetamol from aqueous solutions by catalytic ozonation. The effect of catalyst type and operation parameters on oxidation efficiency was assessed. In addition to improving this process, the present work simplifies it by avoiding the difficult step of catalyst separation. It was found that the thin films were capable of removing all pollutants from target compounds to the oxidation products.
Environmental pollution is a major threat to natural ecosystems, human health, and a challenge for the scientific world to adapt to the many side effects of industrialization and development. The paper presents the results of research designed to configure innovative water depollution hybrid technologies that use advanced oxidation processes (photocatalysis) combined with membrane separation processes, with a synergistic action of degradation of organic pollutants and separation by ultrafiltration, with the special purpose of water treatment at the point of use (POU). The hybrid processes are based on the development of photocatalytic ultrafiltration membrane systems made on quasi-inert support (PVDF) that incorporate nanostructures based on carbon nanotubes (MWCNT) doped with metal oxides. The laboratory model for the evaluation of hybrid systems is presented. It incorporates the photocatalytic ultrafiltration system in an experimental reactor with automatic control and data acquisition for the analysis of scale processes. The tests performed create the premise of elaborating the design specifications of the processes and their integration in real-scale industrial technologies.
Nowadays, water purification technologies are based on nano-scaled adsorbents, such as metal or polymeric nanoadsorbents, metal organic frameworks, metal oxide nanoparticles, and carbonated nanomaterials, which have shown exceptional results in water decontamination. Adsorption is one of the most environmentally friendly and efficient methods used for pollutant removal from aquatic environments due to the large specific surface area of nanoadsorbents, which creates multiple adsorption sites. Therefore, we developed a synthesis method for the large-scale production of an apatitic adsorbent, which we will further use in a water treatment system.
(1) Introduction: Chemical pollutants disposed of various branches of industry pose a significant threat to both the aquatic environment and human health. A specific class of pollutants is given by hardly biodegradable organic compounds coming mainly from pharmaceuticals, personal care products and industrial dyes. These pollutants are identified in water bodies (surface or underground) used as a source of water in drinking water treatment plants, the classic technologies for their elimination being inefficient. Exploring new processes and transposing them on an industrial scale in order to develop innovative, operationally and energy-efficient technologies is a complex approach, supported by both theoretical and experimental investigations, numerical modeling and virtual experiment, being basic steps in shortening the time required and increasing accuracy for developing new methods. (2) Materials and methods: Based on laboratory-level and functional model studies, the combined advanced oxidation processes (by photolysis and photocatalysis) and separation at the interface of photocatalytic ultrafiltrating membranes impregnated with elements based on carbon nanotubes (MWCNTs) decorated with ZnO particles, in the presence of active oxygen species (dissolved ozone), were investigated. The paper presents a methodology and a numerical model for modeling hybrid processes of advanced oxidation and membrane separation in photolysis reactors, as a preliminary step in the development of a water decontamination technology on an industrial scale. The model deals with a coaxial reactor configuration, being based on concepts from fluid mechanics (CFD—Computational Fluid Dynamics) assembled in a multi-physical model that incorporates elements of fluid flow, radiation distribution in the reactor and the dynamics of dissolved ozone photolysis processes, both in the reactor volume and at the filter membrane interface. (3) Results: The results obtained from virtual experiments, at different operating parameters of the reactor allowed the determination of the flow regime in the reactor by highlighting active areas, evaluating the efficiency of disinfection processes and photochemical processes (photolysis, photocatalysis) and by analyzing the reaction dynamics of dissolved ozone in the presence of UV radiation, useful in establishing the technical specifications necessary to make the model on a real scale.