Composite insulation materials are an inseparable part of numerous electrical devices because of synergy effect between their individual parts. One of the main aims of the presented study is an introduction of the dielectric properties of nanoscale magnesium oxide powder via Broadband Dielectric Spectroscopy (BDS). These unique results present the behavior of relative permittivity and loss factor in frequency and temperature range. Following the current trends in the application of inorganic nanofillers, this article is complemented by the study of dielectric properties (dielectric strength, volume resistivity, dissipation factor and relative permittivity) of epoxy-based composites depending on the filler amount (0, 0.5, 0.75, 1 and 1.25 weight percent). These parameters are the most important for the design and development of the insulation systems. The X-ray diffraction patterns are presented for pure resin and resin with optimal filler amount (1 wt %), which was estimated according to measurement results. Magnesium oxide nanoparticles were also treated by addition of silane coupling agent ( -Glycidoxypropyltrimethoxysilane), in the case of optimal filler loading (1 wt %) as well. Besides previously mentioned parameters, the effects of surface functionalization have been observed by two unique measurement and evaluation techniques which have never been used for this evaluation, i.e., reduced resorption curves (RRCs) and voltage response method (VR). These methods (developed in our departments), extend the possibilities of measurement of composite dielectric responses related to DC voltage application, allow the facile comparability of different materials and could be used for dispersion level evaluation. This fact has been confirmed by X-ray diffraction analyses.
Data sharing is a central aspect of judicial systems. The openly accessible documents can make the judiciary system more transparent. On the other hand, the published legal documents can contain much sensitive information about the involved persons or companies. For this reason, the anonymization of these documents is obligatory to prevent privacy breaches. General Data Protection Regulation (GDPR) and other modern privacy-protecting regulations have strict definitions of private data containing direct and indirect identifiers. In legal documents, there is a wide range of attributes regarding the involved parties. Moreover, legal documents can contain additional information about the relations between the involved parties and rare events. Hence, the personal data can be represented by a sparse matrix of these attributes. The application of Named Entity Recognition methods is essential for a fair anonymization process but is not enough. Machine learning-based methods should be used together with anonymization models, such as differential privacy, to reduce re-identification risk. On the other hand, the information content (utility) of the text should be preserved. This paper aims to summarize and highlight the open and symmetrical problems from the fields of structured and unstructured text anonymization. The possible methods for anonymizing legal documents discussed and illustrated by case studies from the Hungarian legal practice.
The effect of short-term (3- and 6-h-long) periodic thermal aging was investigated at three different temperatures on PVC cables and PVC films. Three different temperatures (110, 125, and 140 °C) were used for aging PVC cables and one (110 °C) for PVC films. PVC films were prepared for the investigation containing 0, 30, 40, and 50 weight percent of dioctyl phthalate plasticizer (DOP). The effect of short-term thermal aging was monitored by electrical (dielectric spectrum and voltage response measurement) and mechanical (Shore D hardness) methods. From the loss factor measurements, different deducted quantities were calculated and compared with Shore D hardness, which has been shown to be a parameter reflecting the effect of short-term thermal aging on PVC insulation. The measurements revealed that Shore D hardness is not the best property for monitoring aging. Instead, increasing dissipated power and the shifting behavior of tan δ–frequency curves proved to be the best phenomena for assessing the impact of thermal aging. Simple deducted quantities may provide a basis for following short-term thermal aging.
Many machine learning-based document processing applications have been published in recent years. Applying these methodologies can reduce the cost of labor-intensive tasks and induce changes in the company’s structure. The artificial intelligence-based application can replace the application of trainees and free up the time of experts, which can increase innovation inside the company by letting them be involved in tasks with greater added value. However, the development cost of these methodologies can be high, and usually, it is not a straightforward task. This paper presents a survey result, where a machine learning-based legal text labeler competed with multiple people with different legal domain knowledge. The machine learning-based application used binary SVM-based classifiers to resolve the multi-label classification problem. The used methods were encapsulated and deployed as a digital twin into a production environment. The results show that machine learning algorithms can be effectively utilized for monotonous but domain knowledge- and attention-demanding tasks. The results also suggest that embracing the machine learning-based solution can increase discoverability and enrich the value of data. The test confirmed that the accuracy of a machine learning-based system matches up with the long-term accuracy of legal experts, which makes it applicable to automatize the working process.
Sorting out the legal documents by their subject matter is an essential and time-consuming task due to the large amount of data. Many machine learning-based text categorization methods exist, which can resolve this problem. However, these algorithms can not perform well if they do not have enough training data for every category. Text augmentation can resolve this problem. Data augmentation is a widely used technique in machine learning applications, especially in computer vision. Textual data has different characteristics than images, so different solutions must be applied when the need for data augmentation arises. However, the type and different characteristics of the textual data or the task itself may reduce the number of methods that could be applied in a certain scenario. This paper focuses on text augmentation methods that could be applied to legal documents when classifying them into specific groups of subject matters.
One of the most time-consuming parts of an attorney’s job is finding similar legal cases. Categorization of legal documents by their subject matter can significantly increase the discoverability of digitalized court decisions. This is a multi-label classification problem, where each relatively long text can fit into more than one legal category. The proposed paper shows a solution where this multi-label classification problem is decomposed into more than a hundred binary classification problems. Several approaches have been tested, including different machine-learning and text-augmentation techniques to produce a practically applicable model. The proposed models and the methodologies were encapsulated and deployed as a digital-twin into a production environment. The performance of the created machine learning-based application reaches and could also improve the human-experts performance on this monotonous and labor-intensive task. It could increase the e-discoverability of the documents by about 50%.