Hoon-Ju Chung

Prof. Dr. Hoon-Ju Chung

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2005 in Journal of Information Display
Verified
Journal Article
Open access
HCHoon-Ju Chung
Hoon-Ju Chung
DHDae-Kue Hwang
Dae-Kue Hwang
BKByeong‐Koo Kim
Byeong‐Koo Kim
The dependence of hysteresis characteristics in low temperature poly‐Si (LTPS) thin film transistors (TFTs) on the gatesource voltage (Vgs) or the drain‐source voltage (Vds) bias is investigated and discussed. The hysteresis levels in both p‐type and n‐type LTPS TFTs are independent of Vds bias but increase as the sweep range of Vgs increases. It has been found that the hysteresis in both p‐type and n‐type LTPS TFTs originated from charge trapping and de‐trapping in the channel region rather than at the source/drain edges.

2 January 2019 in Journal of Information Display
Verified
Journal Article
Open access
HCHoon-Ju Chung
Hoon-Ju Chung
This paper proposes a novel 5T1C pixel circuit to compensate for the threshold voltage variation of n-channel LTPS TFTs for high-ppi AMOLEDs. SmartSpice simulation is used to evaluate the compensation capability of the proposed pixel circuit, and layout is performed to check the pixel density in 1 inch. The simulation results show that the proposed pixel circuit can compensate for the threshold voltage variation of n-channel poly-Si TFTs, and the layout confirms that the proposed pixel circuit can be integrated into upto564-ppi AMOLED displays.

10 November 2020 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JKJongbin Kim
Jongbin Kim
HCHoon-Ju Chung
Hoon-Ju Chung
Seung-Woo LeeSeung-Woo Lee
Seung-Woo Lee
In this letter, a new multi-level memory cell using low-temperature polycrystalline silicon and oxide (LTPO) thin-film transistor (TFT) backplane is proposed. The multi-bit data storage can be achieved with a simple structure of two transistors and a capacitor, which controls the threshold voltage of a memory cell transistor exactly. In a memory cell, the low-temperature polycrystalline silicon (LTPS) TFT provides excellent stability against bias stress or current stress. In addition, the oxide semiconductor TFT enables the long-term data storage by virtue of its extremely low off-state leakage current. The proposed memory is fabricated with the LTPO TFT process which includes p-type LTPS and n-type oxide TFTs. Furthermore, the implementation of the multi-level property is successfully verified by measured results.

21 April 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JJJae-Hee Jo
Jae-Hee Jo
WLWoo-Rim Lee
Woo-Rim Lee
HCHoon-Ju Chung
Hoon-Ju Chung
Seung-Woo LeeSeung-Woo Lee
Seung-Woo Lee
In this letter, a self-refreshing multi-level memory-in-pixel (MIP) circuit for liquid crystal display (LCD) comprising low temperature poly-silicon and oxide (LTPO) thin film transistors (TFTs) is proposed. Since the proposed MIP circuit features self-refreshing without embedding frame memory, power consumption can be minimized when displaying a still image. Measurement results verify that the proposed circuit successfully enables a 3-bit grayscale. The LCD employing the proposed MIP circuit consumes only 1.22 % of power compared with a conventional LCD when displaying a still image. Thus, the proposed multi-level MIP circuit is expected to enable a low-power LCD featuring higher color depth with a simple structure.

13 July 2022 in IEEE Access
Verified
Journal Article
Open access
DJDong-Hwan Jeon
Dong-Hwan Jeon
WJWon-Been Jeong
Won-Been Jeong
HCHoon-Ju Chung
Hoon-Ju Chung
Seung-Woo LeeSeung-Woo Lee
Seung-Woo Lee
This paper proposes a new architecture for a micro light emitting diode (micro-LED) display featuring fingerprint detection without any additional light emitting and sensing devices in mobile applications. This paper proposes that conventional LEDs can be used as photodetectors in active-matrix pixel circuits. In the area where a finger touched, some LEDs are used as photodetectors and others are used as light emitting sources. The photocurrents of reverse-biased LEDs under various illumination conditions were investigated. The active-matrix circuit was fabricated using a conventional p-type low-temperature polycrystalline silicon (LTPS) process. The fabricated pixel circuit could distinguish the intensity of the incident light to the sensing LED. The voltage across the sensing LED (V LED ) was investigated when the pixel density was 400 pixels per inch (ppi) and the cover glass thickness was $30 ~\mu \text{m}$ . The experimental results showed that the V LED changed by 0.5 V for 16.7 ms when red, green, or blue LEDs emitted 150 cd/m 2 , 400 cd/m 2 , or 100 cd/m 2 , respectively. $1\times 9$ LED array with 1.5 mm pitch (p) and 2 mm thick cover glass was fabricated to emulate the LED display with 400 ppi and $30 ~\mu \text{m}$ thick cover glass. It is found that an emitting LED affected the sensing LEDs within the distance of 3p by comparing V LED 3. V LED 3 were measured when the material on the cover glass was air and water with white pigments (water/W). $\Delta \mathrm {V} _{\mathrm {LED}}\text{s}$ were 0.29 V and 1.13 V for glass-air and glass-water/W cases, respectively. It is found that the lights incident on the sensing LED comprised not only reflected lights by Fresnel reflection at the glass interface but also scattered lights in the water/W. A $75\times $ magnified fake fingerprint was fabricated. Its material was poly-lactic acid with refractive index of 1.465 which is very close to that of a fingertip. Measured $\Delta \mathrm {V}_{\mathrm {LED}}\text{s}$ at ridges and valleys were 0.48 V and 0.22 V, respectively. The ratio of 0.48/0.22 was 2.18 that is very close to 1.91 that is the ratio of light intensity at the ridge to that at the valley obtained by the calculation. This verifies that the proposed micro-LED display distinguishes the ridges and valleys of fingerprint without any help from any additional devices.

8 April 2022 in Electronics
Verified
Journal Article
Open access
PDF file
HPHyusim Park
Hyusim Park
SLShanthala Lakshminarayana
Shanthala Lakshminarayana
Chenyun PanChenyun Pan
Chenyun Pan
HCHoon-Ju Chung
Hoon-Ju Chung
SJSungyong Jung
Sungyong Jung
The objective of this work was to design a versatile readout circuit for patch-type wearable devices consisting of a Transimpedance Amplifier (TIA). The TIA performs Current to Voltage (I–V) conversion, the most widely used technique for amperometry and impedance measurement for various types of electrochemical sensors. The proposed readout circuit employs a digitally controllable feedback resistor (Rf) technique in the TIA to improve accuracy, which can be utilized in a variety of electrochemical sensors within a current range of 0.1 µA–100 µA. It is designed to accommodate multiple sensors simultaneously to track multiple target analytes for high accuracy and versatile usage. The readout circuit consists of low power operational amplifier (op–amp) and digital circuit blocks, is designed and fabricated with Magna 0.18 µm Complementary Metal Oxide Semiconductor (CMOS) technology, which provides low power consumption and a high degree of integration. The design has a small size of 0.282 mm2 and low power consumption of 0.38 mW with a 3.3 V power supply, which are desirable factors in wearable device applications.