We report a new nematic mixture for liquid-crystal-on-silicon spatial light modulator (SLM) and light detection and ranging (LiDAR) applications. The mixture exhibits a relatively high birefringence (Δn), moderate dielectric anisotropy (Δɛ), low viscosity, and reasonably good photostability. To achieve 2π phase change at 5 V, the response time (on + off) is 2.5 ms at 40 °C with λ = 633 nm, and 5.9 ms with λ = 905 nm. After exposure by a blue laser (λ = 465 nm) with a total dosage up to 20 MJ/cm², this mixture shows no sign of photodegradation. Widespread applications of this material for high brightness SLMs, LiDAR, near-eye displays, and head-up displays are foreseeable.

We report two high birefringence and low viscosity nematic mixtures for phase-only liquid-crystal-on-silicon spatial light modulators. The measured response time (on + off) of a test cell with 2π phase change at 1550 nm, 5 V operation voltage, and 40 °C is faster than 10 ms. To improve the photostability, a distributed Bragg reflector is designed to cutoff the harmful ultraviolet and blue wavelengths. These materials are promising candidates for future 6G optical communications.

We report a new mixture, which is modified from Merck TL-216, for liquid-crystal-on-silicon spatial light modulators (SLMs). To achieve 2π phase change at λ = 633 nm with 5 V operation voltage, the measured response time is about 3 ms at 50 °C. Meanwhile, our mixture exhibits no sign of photodegradation and even the total dosage has exceeded 400 MJ/cm² at a blue laser wavelength λ = 465 nm. In comparison, E7 died at about 30 MJ/cm². Widespread applications of this material for high brightness SLMs, near-eye displays, and head-up displays are foreseeable.

To achieve 60 pixels per degree (PPD) and 100° field of view (FoV) while keeping a reasonably high aperture ratio for active-matrix liquid crystal displays (LCDs), field sequential color (FSC) is a promising approach. We evaluate the physical properties of a high birefringence nematic LC mixture and then use these data to simulate the performance of a fringe-field switching (FFS) LCD. Such an FFS LCD exhibits a fast average gray-to-gray response time (~1.5 ms) to enable FSC operation. By removing the spatial color filters, FSC operation triples the resolution density and optical efficiency, which are critical to high-resolution density and low power consumption virtual reality applications. Wide color gamut (96.2% of the DCI-P3 standard) and superior color uniformity are also demonstrated using such an FSC LCD.