Liquid crystal displays (LCDs) and photonic devices play a pivotal role to augmented reality (AR) and virtual reality (VR). The recently emerging high-dynamic-range (HDR) mini-LED backlit LCDs significantly boost the image quality and brightness and reduce the power consumption for VR displays. Such a light engine is particularly attractive for compensating the optical loss of pancake structure to achieve compact and lightweight VR headsets. On the other hand, high-resolution-density, and high-brightness liquid-crystal-on-silicon (LCoS) is a promising image source for the see-through AR displays, especially under high ambient lighting conditions. Meanwhile, the high-speed LCoS spatial light modulators open a new door for holographic displays and focal surface displays. Finally, the ultrathin planar diffractive LC optical elements, such as geometric phase LC grating and lens, have found useful applications in AR and VR for enhancing resolution, widening field-of-view, suppressing chromatic aberrations, creating multiplanes to overcome the vergence-accommodation conflict, and dynamic pupil steering to achieve gaze-matched Maxwellian displays, just to name a few. The operation principles, potential applications, and future challenges of these advanced LC devices will be discussed.
24 May 2021 in Journal of the Society for Information Display
Augmented reality (AR) and virtual reality (VR) have the potential to revolutionize the interface between our physical and digital worlds. Recent advances in digital processing, data transmission, optics, and display technologies offer new opportunities for ubiquitous AR/VR applications. The foundation of this revolution is based on AR/VR display systems with high image fidelity, compact formfactor, and high optical efficiency. In this review paper, we start by analyzing the human vision system and the architectures of AR/VR display systems and then manifest the main requirements for the light engines. Next, the working principles of six display light engines, namely transmissive liquid crystal display, reflective liquid-crystal-on-silicon microdisplay, digital light processing microdisplay, micro light-emitting-diode microdisplay, organic light-emitting-diode microdisplay, and laser beam scanning displays, are introduced. According to the characteristics of these light engines, the perspectives and challenges of each display technology are analyzed through five performance metrics, namely resolution density, response time, efficiency/brightness/lifetime, dynamic range, and compactness. Finally, potential solutions to overcoming these challenges are discussed.
A planar and broadband cholesteric liquid crystal (CLC) lens is designed, fabricated, and hybridized with a refractive lens to form a catadioptric pancake lens for virtual reality (VR) displays. Due to their opposite optical dispersion behaviors, the chromatic aberration of the assembled pancake lens is dramatically suppressed, as verified by both ray-tracing analysis and experimental results. The demonstrated catadioptric pancake lens has great potential for next-generation VR displays.
We evaluated and compared the performance of a 15.6-inch mini-LED backlit LCD (mLCD) with a commercial OLED (organic light-emitting diode) panel. Both displays exhibited outstanding properties, but the mLCD had advantages in peak brightness, gamma curve, luminance uniformity at low gray scales, color volume, power consumption, and ambient contrast ratio. In comparison with previous measurement methods, our color measurement adopted the reference method recently recommended by the International Committee for Display Metrology (ICDM). The LMK imaging photometer with a high-resolution CMOS sensor was employed to characterize the halo effect and reconstruct the real luminance profiles based on the non-ideal luminance profile of the OLED display. We also proposed a novel strategy to measure the point spread function of the backlight module.
We report two high birefringence and low viscosity nematic mixtures for phase-only liquid-crystal-on-silicon spatial light modulators. The measured response time (on + off) of a test cell with 2π phase change at 1550 nm, 5 V operation voltage, and 40 °C is faster than 10 ms. To improve the photostability, a distributed Bragg reflector is designed to cutoff the harmful ultraviolet and blue wavelengths. These materials are promising candidates for future 6G optical communications.