In this study, experimental and numerical methods were applied to estimate surge and sway wave drift forces and yaw drift moment acting on KVLCC2, advancing in oblique wave. An experiment was carried out in the ocean engineering basin of the Korea Research Institute of Ships and Ocean Engineering (KRISO). A series of regular wave tests under various heading conditions were conducted to investigate ship motion responses and wave drift forces. A Rankine panel method based on potential flow was adopted in the numerical analysis, and the direct pressure integration method that integrates second-order pressure on the hull surface was applied to compute wave drift force. Through this study, validation data of wave drift force acting on KVLCC2 was established, and the computation capability of the potential-based numerical method was systematically analyzed.
16 November 2019 in Journal of Offshore Mechanics and Arctic Engineering
In this study, ship's maneuvering performance in waves is evaluated using numerical computation. To this end, three degrees-of-freedom (3DOF) planar motions are considered, and modular-type maneuvering model (maneuvering modeling group model (MMG model)) is applied. As external force of the equation of motion, hull force, propulsion force, rudder force, and wave drift force are adopted. In order to calculate wave drift force, seakeeping program which is based on a higher-order Rankine panel method is used by considering wave frequency, wave heading, ship's forward speed, and ship's lateral speed. This wave drift force is pre-calculated, made into database, and used in time domain simulation. The developed simulation program is validated by comparing the computation results of a turning test in regular waves with experimental data. Using this program, turning performance in irregular waves is evaluated and sensitivities for time signal of wave elevation are investigated. Through this study, it is confirmed that the simplified method based on the MMG model including wave drift force can provide good agreement with experimental data in a practical point of view. It can be observed that the simulation results considering the lateral speed show better agreement with the experimental data than those without consideration. In the case of irregular wave condition, the turning performance can be affected by wave random phases. When the ship encounters the beam sea during the turning operation, the wave elevations at that time play an essential role in the change of ship speed and turning trajectory.
In this study, the coupled motion of a mooring system and multifloating cranes were analyzed. For the motion analysis, the combined equations of motions of the mooring line and multifloating cranes were introduced. The multibody equations for floating cranes were derived from the equations of motion. The finite element method (FEM) was used to derive equations to solve the stretchable catenary problem of the mooring line. To verify the function of mooring simulator, calculation results were compared with commercial mooring software. To validate the analysis results, we conducted an experimental test for offshore operation using two floating crane models scaled to 1:40. Two floating crane models and a pile model were established for operation of uprighting flare towers. During the model test, the motion of the floating cranes and tensions of the mooring lines were measured. Through the model test, the accuracy of the mooring analysis program developed in this study was verified. Therefore, if this mooring analysis program is used, it will be possible to perform a mooring analysis simulation at the same time as a maritime work simulation.
In this study, a model test was carried out to evaluate the station-keeping performance of Korea Research Institute of the Ships and Ocean Engineering (KRISO) standard semi-submersible, K-Semi in the Deep Ocean Engineering Basin (DOEB). The test was performed using a 1/50 scaled model with 12 mooring lines. The water depth was set to 3.2 m using a moveable bottom structure and truncated mooring lines. The dynamic behavior of the K-Semi was examined using a free decay test and regular wave as well as irregular wave tests of 1800. Large surge, heave and pitch due to drift motion from second-order effect were observed. The reason for the excessive low-frequency pitch motion is attributed to the restoring force and moment related to the mooring system as excessive surge occurred. The numerical model of K-Semi with the truncated mooring system was tuned and calibrated using model test results such as free decay and regular wave tests. Through numerical analysis, the motion characteristics of the K-Semi were compared with irregular model test results. In the case of a semi-submersible using a mooring system, it is observed that excessive pitch motion due to vertical restoring force and moment may occur when large horizontal displacement occurs. The effect of low-frequency pitch motion related to surge motion is an important factor in upwell estimation as well as second-order motion in referred DNV-GL OTG13.
6 September 2017 in Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
In this study, numerical simulations are conducted in order to analyze the capsizing of roll-on/roll-off passenger ship, Sewol, which occurred on 16 April 2014. Since little is known about the reason of ship capsize, numerical simulation aims to the finding of possible scenarios which can cause this tragic accident. To this end, 4-degree-of-freedom (surge, sway, yaw, and roll motions) maneuvering equations are solved. The hydrodynamic coefficients obtained from a similar ship are applied and the WISH-Maneuver program of Seoul National University is used to perform the numerical simulation. The present analysis utilizes the probabilistic approach, which considers various physical variables and involves the simulation of a large number of cases using different combinations of the variables. The total number of simulation cases is over 70 millions, and the simulation results that are close to the conditions of the actual accident situation are selected. Through this process, the effects of the simulation variables are investigated and the potential causes of the accident are identified. The results show the hydrostatic instability of the ship in the operational condition owing to cargo overload and insufficient ballast water, which raised the vertical center of gravity. The reduced stability combined with large starboard steering angle and cargo movement during large heel may have been the decisive reason of capsizing.