A cost-effective mooring system design has been emphasized for traditional offshore industry applications and in the design of floating offshore wind turbines. The industry consensus regarding mooring system design is mainly inhibited by previous project experience. The design of the mooring system also requires a significant number of design cycles. To take aim at these challenges, this paper studies the application of an optimization algorithm to the Floating Production Storage and Offloading (FPSO) mooring system design with an internal turret system at deep-water locations. The goal is to minimize mooring system costs by satisfying constraints, and an objective function is defined as the minimum weight of the mooring system. Anchor loads, a floating body offset and mooring line tensions are defined as constraints. In the process of optimization, the mooring system is analyzed in terms of the frequency domain and time domain, and global and local optimization algorithms are also deployed towards reaching the optimum solution. Three cases are studied with the same initial conditions. The global and local optimization algorithms successfully find a feasible mooring system by reducing the mooring system cost by up to 52%.
30 April 2020 in Journal of Ocean Engineering and Technology
Owing to the regulation of exhaust gas emissions from vessels, liquefied natural gas (LNG) has been garnering attention as an alternative eco-friendly fuel for vessels. LNG is considered as one of the most realistic alternatives to satisfy SOx and NOx regulations. Such social awareness is accelerating the development of LNGpowered vessels. It is necessary to expand the LNG bunkering infrastructure to supply LNG to vessels with LNG propulsion for their smooth operation. Relevant studies have been actively conducted both nationally and globally, and their feasibility has been reviewed. The Korea Research Institute of Ships & Ocean Engineering (KRISO) has been conducting studies on an offshore floating LNG bunkering system and has reviewed the system in terms of the design, equipment, and rules for offshore
In this study, a model test was carried out to evaluate the station-keeping performance of Korea Research Institute of the Ships and Ocean Engineering (KRISO) standard semi-submersible, K-Semi in the Deep Ocean Engineering Basin (DOEB). The test was performed using a 1/50 scaled model with 12 mooring lines. The water depth was set to 3.2 m using a moveable bottom structure and truncated mooring lines. The dynamic behavior of the K-Semi was examined using a free decay test and regular wave as well as irregular wave tests of 1800. Large surge, heave and pitch due to drift motion from second-order effect were observed. The reason for the excessive low-frequency pitch motion is attributed to the restoring force and moment related to the mooring system as excessive surge occurred. The numerical model of K-Semi with the truncated mooring system was tuned and calibrated using model test results such as free decay and regular wave tests. Through numerical analysis, the motion characteristics of the K-Semi were compared with irregular model test results. In the case of a semi-submersible using a mooring system, it is observed that excessive pitch motion due to vertical restoring force and moment may occur when large horizontal displacement occurs. The effect of low-frequency pitch motion related to surge motion is an important factor in upwell estimation as well as second-order motion in referred DNV-GL OTG13.
30 April 2021 in Journal of Ocean Engineering and Technology
This study conducted a model test to evaluate the motion characteristics, relative motions with green water risk, and motion-induced interruption during the leg-lowering steps of in-place installation for a self-installing jack-up type 10 MW offshore wind turbine. For three leg-lowering steps, tests were carried out under combined current-wind-wave conditions while the structure was held in position by a soft-spring mooring. The results show that heave was insensitive to environmental changes owing to the large waterplane area, whereas the current stabilized pitch by suppressing its resonant component. The wind had little effect on heave and pitch, but roll was selectively amplified under quartering incidence. The green water risk was spatially non-uniform, concentrating at a single pontoon tip with small freeboard determined by the wave incidence direction. The operational stability against motion-induced interruption satisfied the NORDFORSK and Graham criteria with a substantial margin at all marine operation locations. Across all responses, the wave incidence direction was the primary governing factor, indicating that heading control is the key strategy for reliable and safe installation, and for defining allowable sea states that leverage the advantages of the incidence direction.