The dynamic development of photovoltaic systems in the world and in Poland is mainly related to the drop in prices of installation components. Currently, electricity from photovoltaics is one of the cheapest renewable energy sources. The basis for effective energy generation is, first of all, failure-free operation of the photovoltaic system over a long period of operation, up to 30 years. The paper presents the results of a study of a low-cost distributed system for monitoring and diagnosis of photovoltaic installations (SmartPV), capable of assessing the operating parameters of individual photovoltaic panels. The devices were tested by connecting them to an existing photovoltaic installation, allowing the measurement of operational parameters of individual photovoltaic panels as well as operating conditions such as illuminance and panel surface temperature. The data were recorded on a server using wireless Wi-Fi transmission. Interesting data were collected during the tests, confirming the usefulness of the suggested device for monitoring the photovoltaic installations. Differences in performance of the photovoltaic panel depending on solar radiation and surface temperature were recorded. The temperature coefficient of power was determined, allowing for increased accuracy in the prediction of generated power. The correct recording in different situation, i.e., shading, sensor damage or weather anomalies, was verified. Based on the collected data, rules will be defined for an expert application which, in combination with SmartPV devices, will ensure a quick response to any malfunctions of the photovoltaic system, both related to failures and those resulting from natural degradation during operation.

In the present day, Europe is moving away from fossil fuels. This is due to the need to reduce CO₂ emissions released to the atmosphere. As a result of this process, especially in Upper Silesia, Poland, there will be more areas requiring measures after the closing of mines. Reclamation of post-mining areas is a very difficult task, as there is no universal method of planning the recultivation. During mining operations, we observed many forms of environmental degradation. The article presents the use of one of the newer and increasingly used modeling methods in recultivation processes—the process map. Analysis of the investment is presented, based on the example of the recultivation of a pit after closing the hard coal mine. The main purpose of the analysis was to shorten the designing time of the construction and realization process. Two maps of processes were made, and a map of the existing and desired processes, as well as the benefits from this, are shown. This article presents only one of the stages of the recultivation process—the investment project process—, treating it as an example for optimizing the entire project related to recultivation.

This paper presents a system for measuring the geometry of powered roof support sections (Shield Support Monitoring System, SSMS). The problem of measuring the geometry of powered roof support sections for the purpose of predicting geological hazards during the rock excavation process is presented. Information on the construction and implementation of the SSMS and research at the Budryk Mine is included. The research aimed to evaluate both the precision and accuracy of the measurement apparatus created, as well as to examine how operating conditions affect the system’s usability. An analysis of inclinometer measurement errors in the prototype system was conducted during in situ tests, demonstrating minimal scattering and high sensor accuracy according to the provided data.

This article deals with the design, development, and analysis of a wireless power transfer system prototype based on capacitive coupling. The system is intended for the continuous charging of a suspended mine drivetrain. It consists of a resonant inverter, primary and secondary matching circuits, a suitable capacitive coupler, and a rectifier with a load, ultimately serving as a battery charger for a mobile energy storage device. The system successfully achieved the target output voltage of 320 V and a charger output power of 2 kW at an operating frequency of 300 kHz. Additionally, the total system efficiency was at the level of 60%, ensuring that the RMS voltages on passive components remained below 3 kV.

As part of the RFCS project, which aimed to improve transport safety in mines, ITG KOMAG proposed a system for monitoring loads and geometric of arch support. The system’s function is to control safety, mainly during suspended monorail runs. This paper presents a hardware model and a measurement method based on the use of vibrating wire strain gauges and draw-wire sensors. The challenge was to properly adapt the vibrating wire strain gauge operation to the requirements of the ATEX directive on the safe use of electrical equipment in underground mines. The signal transducer algorithm and potential mounting locations for the proposed sensors were discussed. The results of tests carried out using the ŁP arc support are presented, reflecting the actual behavior of the casing during loading in accordance with the test methodology proposed by the Central Mining Institute. In order to compare the results with another measurement method, film strain gauges were additionally applied. The results confirm the usefulness of the proposed method for testing in real conditions. The speed and simplicity of installation of vibrating wire strain gauges provides an advantage over the use of film strain gauges, which are very difficult to install in underground conditions.

Mining in underground plants is associated with high risk. Improving work safety and increasing the productivity of longwall systems in the mining industry is a problem considering many criteria. Safety aspects concern both the crew and the machinery. The KOMAG Institute of Mining Technology designed and manufactured a geometry monitoring system based on inclinometers that meet the requirements of the ATEX directive. Monitoring of the roof support geometry is used for the prevention of loss of roof stability: roof fall or/and cave-in. The system was tested on a real object in real conditions.