The integration of membrane distillation with reverse electrodialysis has been investigated as a sustainable sanitation solution to provide clean water and electrical power from urine and waste heat. Reverse electrodialysis was integrated to provide the partial remixing of the concentrate (urine) and diluate (permeate) produced from the membrane distillation of urine. Broadly comparable power densities to those of a model salt solution (sodium chloride) were determined during evaluation of the individual and combined contribution of the various monovalent and multivalent inorganic and organic salt constituents in urine. Power densities were improved through raising feed-side temperature and increasing concentration in the concentrate, without observation of limiting behaviour imposed by non-ideal salt and water transport. A further unique contribution of this application is the limited volume of salt concentrate available, which demanded brine recycling to maximise energy recovery analogous to a battery, operating in a ‘state of charge’. During recycle, around 47% of the Gibbs free energy was recoverable with up to 80% of the energy extractable before the concentration difference between the two solutions was halfway towards equilibrium which implies that energy recovery can be optimised with limited effect on permeate quality. This study has provided the first successful demonstration of an integrated MD-RED system for energy recovery from a limited resource, and evidences that the recovered power is sufficient to operate a range of low current fluid pumping technologies that could help deliver off-grid sanitation and clean water recovery at single household scale.
1 September 2021 in Energy Conversion and Management
• Reverse electrodialysis stack design studied for large salinity gradients in recycle. • Energy efficiency of a Reverse electrodialysis and Electrodialysis stack compared. • Thicker electrodialysis membranes exhibited lower water permeance. • Membrane properties and intermembrane distance critical for high concentrations.
A new method for determining the molecular weight cut-off (MWCO) of an organic solvent nanofiltration (OSN) membrane has been developed utilising poly(propylene) glycol (PPG) oligomers. This new MWCO method overcomes the limitations of the currently popular methods: namely the high molecule cost in the popular polystyrene method, the Donnan Exclusion effects when using dye molecules and the solvent compatibility and HPLC separation resolution limitations of the lesser used poly(ethylene) glycol (PEG) method. A new reverse phase high-performance liquid chromatography separation with evaporative light scattering detection (ELSD) allows the concentration of each oligomer of PPG to be accurately determined and from this the MWCO curves are constructed. The method has a high resolution (size increment of 58 g mol-1 corresponding to the OCH(CH3)CH2 structural unit) and can be used in polar, polar aprotic, and non-polar solvents. The accuracy of the method has been demonstrated in three different solvents (methanol, acetone, and toluene) and 5 different OSN membranes (DuraMem® 150, 200, 500, PuraMem® 280 and StarMemTM 240). Other advantages include; oligomers of PPG are cheap and widely available, can probe a wide range of MWCO and provide high resolution MWCO curves. Consequently, it is proposed that that this method be adopted as a new standard MWCO test for OSN membranes
Fermentations provide an alternative to fossil fuels for accessing a number of biofuel and chemical products from a variety of renewable and waste substrates. The recovery of these dilute fermentation products from the broth, however, can be incredibly energy intensive as a distillation process is generally involved and creates a barrier to commercialization. Membrane processes can provide a low energy aid/alternative for recovering these dilute fermentation products and reduce production costs. For these types of separations many current polymeric and inorganic membranes suffer from poor selectivity and high cost respectively. This paper reviews work in the production of novel mixed-matrix membranes (MMMs) for fermentative separations and those applicable to these separations. These membranes combine a trade-off of low-cost and processability of polymer membranes with the high selectivity of inorganic membranes. Work within the fields of nanofiltration, reverse osmosis and pervaporation has been discussed. The review shows that MMMs are currently providing some of the most high-performing membranes for these separations, with three areas for improvement identified: Further characterization and optimization of inorganic phase(s), Greater understanding of the compatibility between the polymer and inorganic phase(s), Improved methods for homogeneously dispersing the inorganic phase.