Anne Zygmanowski

Ms. Anne Zygmanowski

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2022 in Electronics
Verified
Journal Article
Open access
PDF file
JWJonas Winkelholz
Jonas Winkelholz
MHMoritz Hitzemann
Moritz Hitzemann
ANAlexander Nitschke
Alexander Nitschke
AZAnne Zygmanowski
Anne Zygmanowski
SZStefan Zimmermann
Stefan Zimmermann
Resistive voltage dividers tend to have a highly non-linear transfer function as parasitic and stray capacitances exert an increasing influence with increasing frequency. The non-linear transfer function depends on the topology and resistors used and consists of a low-pass filter with an additional high-pass component in the GHz range. Due to the non-linear transfer function the measured signal differs from the original input signal. Here, we present an improved resistive voltage divider with additional compensation capacities to extend the linear bandwidth. With this new concept, the linear bandwidth is improved from 115 kHz to 88 MHz, while maintaining a DC input impedance of 10 MΩ. For high-voltage insulation and easy manufacturing, surface mounted resistors on a printed circuit board with a compensation electrode on the adjacent side are used. The performance of this resistive voltage divider is demonstrated by measuring a series of high-voltage pulses with an amplitude of 2.5 kVpeak-peak. The measured pulse rise time is about 16 ns, corresponding to an average slew-rate of 150 V/ns. Finally, the developed resistive voltage divider is successfully used to measure fast high-voltage transients required for advanced ion mobility spectrometers with integrated collision induced fragmentation.

1 October 2020 in Sensors and Actuators B: Chemical
Verified
Journal Article
Closed access
Marc BergerMarc Berger
Marc Berger
AZAnne Zygmanowski
Anne Zygmanowski
FSFlora Sellering
Flora Sellering
HRHannes Röhrich
Hannes Röhrich
TPThorsten Perl
Thorsten Perl
SZStefan Zimmermann
Stefan Zimmermann

17 August 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Marc BergerMarc Berger
Marc Berger
AZAnne Zygmanowski
Anne Zygmanowski
SZStefan Zimmermann
Stefan Zimmermann
Certain applications require a contactless measurement to eliminate the risk of sensor-induced sample contamination. Examples can be found in chemical process control, biotechnology or medical technology. For instance, in critically ill patients requiring renal replacement therapy, continuous in-line monitoring of blood conductivity as a measure for sodium should be considered. A differential inductive sensing system based on a differential transformer using a specific flow chamber has already proven suitable for this application. However, since the blood in renal replacement therapy is carried in plastic tubing, a direct measurement through the tubing offers a contactless method. Therefore, in this work we present a differential transformer for measuring directly through electrically non-conductive tubing by winding the tube around the ferrite core of the transformer. Here, the dependence of the winding type and the number of turns of the tubing on the sensitivity has been analyzed by using a mathematical model, simulations and experimental validation. A maximum sensitivity of 364.9 mV/mol/L is measured for radial winding around the core. A longitudinal winding turns out to be less effective with 92.8 mV/mol/L. However, the findings prove the ability to use the differential transformer as a truly contactless sensing system.

29 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Marc BergerMarc Berger
Marc Berger
AZAnne Zygmanowski
Anne Zygmanowski
SZStefan Zimmermann
Stefan Zimmermann
The electrical and dielectric properties of liquids can be used for sensing. Specific applications, e.g., the continuous in-line monitoring of blood conductivity as a measure of the sodium concentration during dialysis treatment, require contactless measuring methods to avoid any contamination of the medium. The differential transformer is one promising approach for such applications, since its principle is based on a contactless, magnetically induced conductivity measurement. The objective of this work is to investigate the impact of the geometric parameters of the sample or medium under test on the sensitivity and the noise of the differential transformer to derive design rules for an optimized setup. By fundamental investigations, an equation for the field penetration depth of a differential transformer is derived. Furthermore, it is found that increasing height and radius of the medium is accompanied by an enhancement in sensitivity and precision.

Verified
Journal Article
Open access
PDF file
SYSari Yli-Kauhaluoma
Sari Yli-Kauhaluoma
MSMilt Statheropoulos
Milt Statheropoulos
AZAnne Zygmanowski
Anne Zygmanowski
OAOsmo Anttalainen
Osmo Anttalainen
HHHanna Hakulinen
Hanna Hakulinen
PVPaula Sinikka Vanninen
Paula Sinikka Vanninen
Public warning systems are an essential element of safe cities. However, the functionality of neither traditional nor digital emergency warnings is understood well enough from the perspective of citizens. This study examines smart city development from the perspective of safety by exploring citizens’ viewpoints. It investigates people’s perceptions of the ways in which they obtain warnings and information about emergencies involving health risks. Data were collected in the form of focus group interviews and semi-structured interviews in Finland, Germany, and Greece. The results suggest that people place a lot of trust in their social network, receiving text messages, and their ability to use web-based search engines in order to obtain public warnings. The study discusses the challenges identified by citizens in the use of conventional radio and television transmissions and sirens for public warnings. Based on the results, citizens demonstrate informed ignorance about existing mobile emergency applications. Our results imply that it is not sufficient to build emergency communication infrastructure: the development of smart, safe cities requires continuous work and the integration of both hard and soft infrastructure-oriented strategies, i.e., technological infrastructure development including digitalisation and education, advancement of knowledge, and participation of people. Both strategic aspects are essential to enable people to take advantage of novel digital applications in emergency situations.