Public lighting represents a large part of the energy consumption of towns and cities. Efficient management of public lighting can entail significant energy savings. This work presents a smart system for managing public lighting networks based on wireless communication and the DALI protocol. Wireless communication entails significant economic savings, as there is no need to install new wiring and visual impacts and damage to the facades of historical buildings in city centers are avoided. The DALI protocol uses bidirectional communication with the ballast, which allows its status to be controlled and monitored at all times. The novelty of this work is that it tackles all aspects related to the management of public lighting: a standard protocol, DALI, was selected to control the ballast, a wireless node based on the IEEE 802.15.4 standard with a DALI interface was designed, a network layer that considers the topology of the lighting network has been developed, and lastly, some user-friendly applications for the control and maintenance of the system by the technical crews of the different towns and cities have been developed.

Precision agriculture can be defined as the science of using technology to improve the agricultural production. It is advisable for farmers to use a decision support system; in fact, real–time monitoring of climatic conditions is the only way to know the water needed by a cultivation. On the other hand, since the 1990s, a strong decrease of the Mediterranean Quercus has been observed in the pastures of southwestern Spain and Portugal, causing a high mortality of holm and cork oak trees. Among the factors associated with this decrease, the radical decomposition caused by Phytophthora Cinnamomi is remarkable for its gravity, which makes it necessary to reforest the trees and to monitor the microclimatic factors that have an influence on this regeneration. Wireless Sensor Networks (WSN) are a technology in full evolution and development, as well as their appropriate use in cultivations that help to implement ecological techniques. With these considerations in this work five units/nodes with one or more sensors that allow different environmental readings have been developed. In this work, the acquisition of data obtained from different sensors has been achieved, allowing the monitoring of climatic elements such as soil moisture, air quality, temperature and humidity, rainfall intensity, precipitation level, wind speed and direction, luminous flux and atmospheric pressure. A web page has been designed where the user can consult the climatic conditions of the cultivation or reforestation. Different devices interconnected with a central unit have been developed where measurements of the cultivation are sent for its later analysis by the farmer. The microclimatic data acquisition developed in the WSN proposed in this paper allows a farmer to make decisions about the irrigation of the cultivation, use of fertilizers, the development and maturation phases of the cultivated products, obtaining the optimum stages of cultivation and harvesting.

The effort to continuously improve and innovate smart appliances (SA) energy management requires an experimental research and development environment which integrates widely differing tools and resources seamlessly. To this end, this paper proposes a novel Direct Load Control (DLC) testbed, aiming to conveniently support the research community, as well as analyzing and comparing their designs in a laboratory environment. Based on the LabVIEW computing platform, this original testbed enables access to knowledge of major components such as online weather forecasting information, distributed energy resources (e.g., energy storage, solar photovoltaic), dynamic electricity tariff from utilities and demand response (DR) providers together with different mathematical optimization features given by General Algebraic Modelling System (GAMS). This intercommunication is possible thanks to the different applications programming interfaces (API) incorporated into the system and to intermediate agents specially developed for this case. Different basic case studies have been presented to envision the possibilities of this system in the future and more complex scenarios, to actively support the DLC strategies. These measures will offer enough flexibility to minimize the impact on user comfort combined with support for multiple DR programs. Thus, given the successful results, this platform can lead to a solution towards more efficient use of energy in the residential environment.

In this paper we present some architectures to deal with fast convolution computation based on carry save adders which are intended to be specifically implemented on FPGAs. Carry-save adders are not frequent in FPGA implementations since FPGA has a fast carry propagation path. In this paper we prove that it is possible to use carry-save arithmetic in a efficient way on FPGA for convolution operation. We make use of the specific structure of the FPGA to design an optimized accumulator which is able to deal with carry-save additions as well as carry-propagate additions using the same hardware. This lead to an efficient combined CSA-CPA architecture with fast computation and optimizing the hardware cost. Experimental results for different word lengths are presented to validate our proposal.

The objective of this work is the realization of an application in JAVA whose function will be to simulate the MIPS 32-bit architecture in pipelined computer with hardwired control unit, in order to help in the learning and understanding of this architecture by the students in Computer Architecture subjects. With it, students will be able to graphically visualize the datapath of multiple MIPS instructions passing through the different stages of the pipelined computer.