Federica Graffeo

Ms. Federica Graffeo

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2021 in Energies
Verified
Journal Article
Open access
PDF file
FGFederica Graffeo
Federica Graffeo
Silvio VaschettoSilvio Vaschetto
Silvio Vaschetto
AMAlessio Miotto
Alessio Miotto
FCFabio Carbone
Fabio Carbone
ATAlberto Tenconi
Alberto Tenconi
ACAndrea Cavagnino
Andrea Cavagnino
Thermal analysis represents a key factor in electrical machine design due to the impact of temperature increase on insulation lifetime. In this context, there has been a wide investigation on thermal modeling, particularly for machines used in harsh working conditions. In this perspective, brake-by-wire (BBW) systems represent one of the most challenging applications for electrical machines used for automotive smart actuators. Indeed, electro-actuated braking systems are required to repeatedly operate the electric machine in high overload conditions in order to limit the actuator response time, as well as to enhance gravimetric and volumetric specific performance indexes. Moreover, BBW systems often impose unconventional supply conditions to the electric machine, consisting of dc currents in three-phase windings to keep the rotor fixed during the braking intervals. However, a dc supply leads to uneven temperature distributions in the machine, and simplified thermal models may not accurately represent the temperature variations for the different machine parts. Considering such unconventional supply conditions, this paper initially investigates the applicability of a conventional lumped-parameters thermal network (LPTN) based on symmetry assumptions for the heat paths and suitable for surface-mounted PM synchronous machines used in BBW systems. An extensive test campaign consisting of pulses and load cycle tests representative of the real machine operations was conducted on a prototype equipped with several temperature sensors. The comparison between measurements and predicted average temperatures, together with insights on the unbalanced heat distribution under the dc supply obtained by means of finite element analyses (FEA), paved the way for the proposal of a phase-split LPTN with optimized parameters. The paper also includes a critical analysis of the optimized parameters, proposing a simplified, phase-split lumped-parameters thermal model suitable to predict the temperature variations in the different machine parts for PM synchronous electric machines used in BBW systems.

23 August 2020
Verified
Conference Paper
Closed access
FGFederica Graffeo
Federica Graffeo
Silvio VaschettoSilvio Vaschetto
Silvio Vaschetto
MCMarco Cossale
Marco Cossale
MKMichael Kerschbaumer
Michael Kerschbaumer
EBEdson Bortoni
Edson Bortoni
ACAndrea Cavagnino
Andrea Cavagnino
Among the synchronous electrical machines without permanent magnets, the wound-rotor salient pole solution has been recently used by some major carmakers for traction applications. However, in salient pole rotor structures the field conductors are subjected to large centrifugal forces when the machine operates at high rotational speed, in particular when unpotted winding are adopted. For this reason, the paper investigates the possibility of using cylindrical woundrotor structures as a viable solution for automotive traction applications. Assuming an existing salient pole prototype as baseline, a cylindrical rotor has been sized to fit in the same stator bore. On the basis of analytical and finite element analyses, the paper initially compares the two rotor structures from the electromagnetic point of view. In addition, the paper includes the preliminary verifications of the mechanical robustness for the sized cylindrical rotor design.

3 September 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Open access
FGFederica Graffeo
Federica Graffeo
Silvio VaschettoSilvio Vaschetto
Silvio Vaschetto
Sandro RubinoSandro Rubino
Sandro Rubino
ATAlberto Tenconi
Alberto Tenconi
ACAndrea Cavagnino
Andrea Cavagnino
Wound field synchronous machines are gaining attention as an interesting permanent magnet-free alternative for propulsion applications. The third degree of freedom introduced by the rotor current makes the electromagnetic design of these machines not trivial. Hence, dedicated and fast analysis tools are necessary to predict the machine behavior. This paper presents a fully analytical procedure for the computation of the no-load characteristic of salient-pole wound field synchronous machines. The procedure considers the iron saturation and includes the magnetic shunt of the stator slots. The distortion of the air gap flux density waveform introduced by the teeth saturation and the rotor saliency are considered. The procedure has been experimentally validated using a 4 poles, 100 kW peak power wound field synchronous motor.

8 September 2025 in IEEE Open Journal of Industry Applications
Verified
Journal Article
Open access
GZGmyrek Zbigniew
Gmyrek Zbigniew
FGFederica Graffeo
Federica Graffeo
Silvio VaschettoSilvio Vaschetto
Silvio Vaschetto
ACAndrea Cavagnino
Andrea Cavagnino
The article addresses the challenge of determining the individual components of ferromagnetic losses within the generally accepted three-component loss model. It carefully examines variations in each loss contribution caused by the varying proportion of material whose characteristics have been altered by the cutting process. Special emphasis is given to the approach for calculating eddy current losses, which are highly dependent on the proportion of damaged material. Additionally, the article investigates the dependence of excess losses on frequency. In this context, the applicability of known analytical formulas for determining eddy current losses and excess losses is discussed. The merit of this article is the accuracy of mapping the measurement results using the proposed methodology.

16 February 2026 in IEEE Open Journal of Industry Applications
Verified
Journal Article
Open access
MJMatias Jiménez
Matias Jiménez
FGFederica Graffeo
Federica Graffeo
Silvio VaschettoSilvio Vaschetto
Silvio Vaschetto
Carlos Madariaga-CifuentesCarlos Madariaga-Cifuentes
Carlos Madariaga-Cifuentes
JTJuan Tapia
Juan Tapia
ACAndrea Cavagnino
Andrea Cavagnino
This paper presents a magnetic equivalent circuit for the electromagnetic analysis of axial flux permanent magnet synchronous machines. The proposed methodology is based on a quasi-3D approach and incorporates the non-linear iron core behavior, the rotor motion, and magnetic leakage effects. A key strength of the proposed approach is its adaptability to different machine configurations, starting from a single-stage network and extended to multi-stage topologies with different stator-rotor arrangements. This article also provides a detailed guide to constructing the reluctance network, including simplifications to facilitate adoption by less experienced designers. Validation is performed against both 3D finite element analysis simulations and experimental tests, demonstrating good agreement in key performance metrics, such as magnetic flux density, back electromotive force, and torque. The results validate the performance of the proposed MEC in reducing computational time while maintaining satisfactory accuracy, positioning it as a valuable tool for preliminary design and optimization of studies.

11 August 2025 in IEEE Open Journal of Industry Applications
Verified
Journal Article
Open access
AIAlessandro Ionta
Alessandro Ionta
Sandro RubinoSandro Rubino
Sandro Rubino
FGFederica Graffeo
Federica Graffeo
RBRadu Bojoi
Radu Bojoi
Electrically excited synchronous machines (EESMs) have historically been used as efficient and reliable synchronous generators. However, the actual need for cost-effective, sustainable motors without rare-earth magnets has notably increased the interest in EESMs, which are considered a valid replacement for permanent magnet synchronous machines (PMSMs) in electrified powertrains. As the electrical machines employed in automotive applications exhibit deep magnetic saturation, the EESM introduces significant challenges in properly modeling the magnetic behavior, especially considering the cross-coupling effects between stator and rotor. EESM-based electrical drive development requires accurate circuital models to predict EESM behavior. Therefore, this article proposes a novel voltage-behind-reactance (VBR) model based on flux maps provided by finite element analysis (FEA) or experimental identification procedures. The proposed VBR model has been validated in simulation and experimentally on a commercial 100 kW EESM currently used on the Renault Zoe EV R135, demonstrating its potential for accurately modeling EESMs designed for traction applications.