A modern and widely used tool for thermal analysis in the electric motor design is computational fluid dynamics CFD which is a robust tool for these studies but is computationally expensive. Therefore, two alternative approaches are studied in this work, a lumped parameter thermal network and a thermal model based on the finite element method (FEM). First, an electromagnetic analysis is carried out since these results are the input values for the thermal models. Then, the thermal network is presented, and the FEM procedure is explained. The results indicate a good accuracy from the two models as they are compared to experimental temperature measurements.
16 February 2026 in IEEE Open Journal of Industry Applications
This paper presents a magnetic equivalent circuit for the electromagnetic analysis of axial flux permanent magnet synchronous machines. The proposed methodology is based on a quasi-3D approach and incorporates the non-linear iron core behavior, the rotor motion, and magnetic leakage effects. A key strength of the proposed approach is its adaptability to different machine configurations, starting from a single-stage network and extended to multi-stage topologies with different stator-rotor arrangements. This article also provides a detailed guide to constructing the reluctance network, including simplifications to facilitate adoption by less experienced designers. Validation is performed against both 3D finite element analysis simulations and experimental tests, demonstrating good agreement in key performance metrics, such as magnetic flux density, back electromotive force, and torque. The results validate the performance of the proposed MEC in reducing computational time while maintaining satisfactory accuracy, positioning it as a valuable tool for preliminary design and optimization of studies.