Industrial robots, like all machines, require energy to operate, which is why energy efficiency in industrial robotics has been a subject of consideration in recent years in many scientific and industrial centers. Interest in the topic is especially noticeable in Industry 4.0. Research on energy efficiency stems from the emergence of new possibilities in terms of making strategic decisions related to manufacturing processes. As energy-efficient production is an essential part of sustainable development, the energy efficiency of industrial robots must be considered. The need to reduce costs while maintaining quality and increasing production efficiency has necessitated the implementation of modern solutions aimed at reducing electricity consumption. The rational use of electrical energy, especially in the industrial sector, significantly reduces production costs and, consequently, contributes to a company’s profits and competitiveness. This article aims to provide an overview of energy efficiency issues based on recently published articles. This article discusses the appropriate selection of robots, their programming, energy-efficient trajectory planning, and the monitoring of the operation of the robotic system to minimize energy consumption. Typical industrial applications of robots are also mentioned and discussed.

This work presents ideas for a passenger car driving simulator for teaching the disabled. The functional structure, design assumptions, and the concept and operation of the proposed simulator are presented.

Determining the location of objects, for example roadheader in a hard coal mine, is a task that should be automated in the conditions of state-of-the-art mining. Current solutions do not meet the user’s expectations due to the lack of the possibility of automation, maladjustment to the environment of a hard coal mine or not meeting the legal requirements. The article describes the initial stage of work on an automatic system for determining the position of machines in difficult underground conditions, including the analysis of requirements and constraints, an overview of available solutions, technologies and algorithms, as a result of which devices were selected for further tests. To determine the location, it is necessary to take distance measurements with high accuracy, despite the disturbances resulting from the working environment. Ultrasonic devices were selected and then tested under various operating conditions, including different distances between the transmitter and receiver as well as different directions and intensities of air movement that could distort the measurement results. During tests, sufficient accuracy, as well as other parameters, of the ultrasonic transducers were confirmed, allowing for distance measurements in the required range, suitable for use in the real-time locating system (RTLS) being developed.

The article presents tests on the possibility of using ultrasonic transducers for accurate distance measurement in hard coal mines. In order to check the impact of selected disturbing factors on the measurement results, test stands were built, and then a full cycle of measurements with the use of different transducers (AR30 and AR41), which were selected and pre-tested in previous research projects, was realized. The impact of such disturbing factors as airborne dust (coal, stone, lime and mixed dust), changes in temperature and humidity on the propagation of ultrasonic waves, amplitude and measurement accuracy was investigated. The tests were preceded by theoretical analysis. It was found that the transducers selected for the tests had a sufficient accuracy and range, so they can be used in the devices planned to be designed, allowing for the determining of the location of a roadheader in hard coal mine roadways, taking into account technical and legal restrictions. It was also specified which disturbing factors should be compensated and what methods and parameters of this compensation should be used.

The subject of the discussion is oriented toward limiting the energy consumption of the bucket conveyor used in jig concentrator plants by controlling its speed. A method of predictive control of the bucket conveyor speed is presented. It allows for reducing the energy consumption due to appropriate selection of bucket movement speed to ensure the nominal filling of buckets along the entire length of the conveyor. This approach enables limiting the idling speed of the conveyor, extend its life, and also reduce the electricity consumption of the entire system. Experimental studies, carried out at the “Sośnica” Coal Mine working facility, confirmed that the use of a predictive algorithm for controlling the bucket conveyor speed and adapting the bucket speed to the current load decreased in energy consumption n by 9.6%, with 80% of the filling conveyor.