Implementation of construction works on weak (e.g., compressible, collapsible, expansive) soils such as peatlands often is limited by logistics of equipment and shortage of available and applicable materials. If preloading or floating roads on geogrid reinforcement or piled embankments cannot be implemented, then soil stabilization is needed. Sustainable soil stabilization in an environmentally friendly way is recommended instead of applying known conventional methods such as pure cementing or excavation and a single replacement of soils. Substitution of conventional material (cement) and primary raw material (lime) with secondary raw material (waste and byproducts from industries) corresponds to the Sustainable Development Goals set by the United Nations, preserves resources, saves energy, and reduces greenhouse gas emissions. Besides traditional material usage, soil stabilization is achievable through various secondary raw materials (listed according to their groups and subgroups): 1. thermally treated waste products: 1.1. ashes from agriculture production; 1.2. ashes from energy production; 1.3. ashes from various manufacturing; 1.4. ashes from waste processing; 1.5. high carbon content pyrolysis products; 2. untreated waste and new products made from secondary raw materials: 2.1. waste from municipal waste biological treatment and landfills; 2.2. waste from industries; 3. new products made from secondary raw materials: 3.1. composite materials. Efficient solutions in environmental engineering may eliminate excessive amounts of waste and support innovation in the circular economy for sustainable future.

The release of antibiotics into the aquatic environment enhances the drug resistance capabilities of microorganisms, as in large water reservoirs, their concentrations are lesser than their minimum bactericidal concentration, and microorganisms living there become resistant to such antibiotics. Therefore, robust hybrid technologies, comprising of efficient conventional adsorption processes and modern membranes processes, are needed to effectively remove such pollutants from industrial effluents. The present study is an attempt where iron-based magnetic carbon nanocomposites (Fe₃O₄/C) were prepared from mango biomass precursors and utilized as an adsorbent for the removal ciprofloxacin from wastewater in combination with three types of membranes that are robust but fouled by organic matter. The Fe₃O₄/C composite was characterized using energy dispersive X-Ray (EDX) technique, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Brunauer Emmett Teller (BET), Barrett–Joyner-Halenda (BJH) surface area, Thermogravimetric (TG)/Thermal differential analysis (DTA) and point of zero charge pH analyses. Initially, batch adsorption experiments were used to determine adsorption parameters. Then the adsorption unit was coupled with membrane pilot plant where the adsorption role was to adsorb CIPRO before entering into the membrane unit to control fouling caused by selected antibiotic. In batch experiments, the equilibrium time was found as 60 min and kinetics data were more favorably accommodated with the pseudo-2nd-order model (R² = 0.99). Langmuir model (R² = 0.997) more favorably accommodated the equilibrium data in comparison to other models used such as the Freundlich (R² = 0.86), Temkin (R² = 0.91) and Jovanovich (R² = 0.95) models. The thermodynamic aspects of the adsorption process were also evaluated and the process was found to be spontaneous, feasible and exothermic. The influence of adsorbent dosage and pH, were also investigated, where the optimal adsorption conditions were: optimum pH = 7 and optimum Fe₃O₄/C dosage = 0.04 g. The CIPRO-loaded nanocomposite was regenerated with NaOH, CH₃OH and distilled water several times. Improved percent rejections of CIPRO and permeate fluxes with the membrane/adsorption operation were observed as compared to naked membrane operations. Magnetic adsorbent was found as a best solution of foul control; a defect in the modern robust technology of membranes. However, further experimentation is needed to validate the present findings.

A process of anaerobic digestion of agricultural biomass was simulated by SuperPro Designer software v 8.5 to analyze the cost of production. The simulated project used fruits and vegetable wastes as a feedstock. The concentration of methane produced is 55% (v/v) from a total of 936.8 m3. h–1 biogas and after purification, the concentration of methane is upgraded up to 95% (v/v). The system was designed to treat the agricultural waste, and was able to reduce more than 60% of the initial COD (chemical oxygen demand). From the study, economic analysis shows that the profit margin is achieved at 11% and the rate of return of investment is at 12% which gives a payback period of 8.2 years

Industrial and strategic significance of platinum group elements (PGEs)—Os, Ir, Ru, Rh, Pd, Pt—makes them irreplaceable; furthermore, some PGEs are used by investors as “safe heaven” assets traded in the commodity markets. This review analyzes PGEs from various aspects: their place in the geosphere, destiny in the anthroposphere, and opportunity in the economy considering interactions among the exploration, recycling of urban ores, trade markets, speculative rhetoric, and changes required for successful technological progress towards the implementation of sustainability. The global market of PGEs is driven by several concerns: costs for extraction/recycling; logistics; the demand of industries; policies of waste management. Diversity of application and specific chemical properties, as well as improper waste management, make the recycling of PGEs complicated. The processing approach depends on composition and the amount of available waste material, and so therefore urban ores are a significant source of PGEs, especially when the supply of elements is limited by geopolitical or market tensions. Recycling potential of urban ores is particularly important in a long-term view disregarding short-term economic fluctuations, and it should influence investment flows in the advancement of innovation.

The Silica monolith particles (SMP) were prepared from Tetra-Methyl-Ortho-Silicate (TMOS) and characterized by Fourier transforms infrared (FTIR), Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and surface area analyzer. FTIR analysis showed the Si−O stretching confirming SMP formation. SEM analysis provided information about the mean diameter of SMP (1−5 µm). EDX confirmed the presence of silicon and oxygen in the SMP. Moreover, the calculated surface area for SMP was found to be around 367 m²/g, whereas BJH pore size distributed particles were 87.15 along with the total pore volume and pore radius of 0.073 cm³/g and 16.627 Å, respectively. Besides, the removal efficiency was found to be about 96%. Various kinetic equations were used to calculate the adsorption parameters. Overall, the results show that the most appropriate model for the kinetics data was the pseudo-second order kinetics model while the mechanism of adsorption was best explained by the Langmuir isotherm. The highest removal of Basic Red 5 dye after 120 min at 298 K was 576 mg/g. Moreover, the thermodynamics parameters (Enthalpy, Gibb’s energy, and Entropy) were also estimated. The ΔH° (0.995 kJ/mol) value depicted the endothermic nature of the process. The non-spontaneous aspect of the process was evident from the ΔG° values which were 60.431, 328.93, and 339.5 kJ/mol at 293, 303, and 313 K, respectively. From the high removal efficiency value, it can be concluded that the prepared adsorbent can be a potential adsorbent in the reclamation of dyes from wastewater.

Coffee husk and coffee pulp are by-product of coffee fruit and bean processing, can be considered as potential functional ingredients for food production as coffee cherry flour (CCF). The CCF contains a lot of carbohydrates, proteins, caffeine, tannins, and polyphenols. In this study, CCF was combined with modified arrowroot starch (MAS) and modified cassava flour (MOCAF) into cookies and improvement on the physical, chemical, and nutraceutical properties of the cookies were studied. The cookies consisted of 20 % of MOCAF and 80 % mixed of modified arrowroot starch and CCF in five levels (80 %:0 %; 75 %:5 %; 70 %:10 %; 65 %:15 %; 60 %:20 %) and objective physical, chemical, and nutraceutical properties of the cookies were assessed. The results showed that the total dietary fiber content was enhanced from 11.69 % to 19.48 % with a high proportion of 20 % CCF. The cookies added with CCF displayed enhanced antioxidant activity. Acceptable cookies were obtained by adding 5 % CCF. Thus, the results implied that cookies with CCF addition obtained dietary fiber enriched cookies with improved antioxidant activity.