A novel continuous tunable phase progression beamforming feeding network is proposed using 4x 4 Butler matrix and tunable phase shifters. To tune the progressive phase difference at the output ports of matrix network, four phase shifters (i.e. two phase shifters with 90° tuning range, and other two with 180° phase tuning range) are integrated within the Butler matrix. Two-channel digital voltages control all four phase shifters simultaneously to tune the phase difference in 90° range for each input excitation of the Butler matrix, and the 360° full range of the progressive phase difference is realized by switching four input ports. The theoretical analysis is carried out to reduce the number of the phase shifters as well as their phase tuning ranges, and the closed-form equations are derived to minimize the control complexity. To prove the design concept, a prototype of the proposed tunable Butler matrix is designed at 5.8 GHz, and the experimental results agree well with the simulation results to prove the design theory. Integrating with four patch antenna elements, the measured radiation beam is steered from -51° to 52° by tuning two control voltages.
18 February 2020 in IEEE Microwave and Wireless Components Letters
This letter presents a new microstrip line-phased array using 3 x 3 Nolen matrix - with three inputs and three output ports. For each input port excitation, the signal is divided into three equal magnitudes and unique progressive phase shifts at its output ports. The proposed microwave network is composed of three 180° couplers with two of them having identical coupling factors and two microstrip line-phase shifters. To verify the proposed design concept, a prototype of the feeding network working at 5.8 GHz is designed, fabricated, and measured. Both simulation and measurement results are in good agreement with the theoretical prediction.
3 February 2025 in IEEE Transactions on Terahertz Science and Technology
We report the first experimental demonstration of an alternative approach for achieving integrated broadband terahertz (THz) switching functionality, based on photoconductivity modulation in thin film Si on low-loss sapphire substrates. By employing a silicon thin film mesa (14×14 μm²) on a Silicon-on-Sapphire (SoS) substrate (with 1.5-μm-thick silicon and 600-μm-thick sapphire), an optically-controlled THz switch integrated with low-loss CPW transmission lines operating from 110 GHz to 220 GHz has been designed, fabricated, and characterized. To control the switch in this prototype demonstration, a 915 nm laser diode was used to illuminate the silicon mesa through an optical fiber. The switch performance was measured on-wafer in both D- and G-band; an average on-state insertion loss of ∼3.5 dB (with minimum insertion loss of 2.5 and 1.8 dB at 160 and 200 GHz), and an off-state isolation greater than 20 dB across the entire frequency range have been achieved. This performance can be further greatly improved, and is comparable to or better than competing approaches, with the advantage that this approach allows seamless integration of the switch with passive components on low-loss sapphire substrates. This makes the reported approach promising for developing high-performance and compact THz switches for next-generation adaptive circuits and systems.
26 September 2022 in IEEE Transactions on Terahertz Science and Technology
A novel and cost-effective approach for high resolution terahertz imaging using photo-induced coded-apertures on micromachined mesa array structures is reported. The mesa-array structures are designed to have subwavelength electrically-isolated mesas for generation of high-fidelity photopatterns for THz imaging. A Si mesa array prototype structure was successfully fabricated and tested. Measurements show that a modulation depth of ∼22 dB was obtained in the frequency range of 740-750 GHz under a light intensity of 11.7 W/cm 2 , which agrees well with theoretical analysis and full-wave simulation. Initial imaging experiments were first performed using 64 pixels (over different areas) for validation and performance evaluation. More advanced imaging using quadrupled pixel number (256 pixels) was conducted in order to resolve subwavelength features. As a result, a wavelength-scale spatial resolution of 400 µm has been successfully demonstrated, and a subwavelength resolution as small as ∼250 µm (0.625λ at 740 GHz) has been shown to be potentially achievable. The proposed photo-induced coded aperture imaging using mesa arrays is promising for developing real-time high-resolution THz imaging with simple system and low cost.
3 February 2023 in IEEE Transactions on Terahertz Science and Technology
A fully integrated lens-coupled dual-polarization detector for imaging was designed, fabricated, and characterized in the terahertz (THz) region. Two zero-bias heterostructure backward diodes (HBDs) were monolithically integrated into a planar dual-polarization annular-slot antenna. An impedance matching network consisting of an interdigitated DC block and shorted stubs was implemented for maximum power transfer. The fabricated chip was then mounted on an extended hemispherical silicon lens for high antenna efficiency. The performance of the integrated detector has been characterized at 200 GHz. The detector module can simultaneously measure the two orthogonal linear polarized components of the incident THz waves, and hence obtain the polarization direction. On the basis of this polarimetric detection, polarization-resolved imaging of a Gaussian beam, as well as birefringent samples, was performed using the integrated detectors. The angular resolution of the polarization detection has been demonstrated to be as small as 3°. The single-pixel detector demonstrated here is amenable to array applications for THz focal-plane arrays that will have a significant impact on a wide range of remote sensing, though-barrier imaging, and detection/identification applications.
16 March 2022 in IEEE Microwave and Wireless Components Letters
We report the design, fabrication, and prototype demonstration of a 200-GHz polarization-resolved quasi-optical detector employing monolithically integrated zero-bias heterostructure backward diodes (HBDs). In this design, polarization resolution is achieved by orthogonally integrating the detectors with a planar dual-polarization annular-slot antenna. The detector chip was fabricated and mounted on an extended hemispherical Si lens to enhance antenna efficiency in the millimeter-wave to terahertz region. The responsivity and radiation patterns of the detector were characterized experimentally; good agreement with theoretical calculations was obtained. By measuring the outputs of two orthogonal HBDs as a function of the polarization angle of the incident wave, the planar detector detects intensity and resolves polarization. On the basis of the polarimetric measurement, we further demonstrate the polarization imaging capability of the proposed detector by using it as an imaging system. The detector is promising for developing terahertz polarimetric sensors and imaging arrays in chemical sensing, biomedical imaging, and radio astronomy applications.