Optically controlled RF switches with a novel non-contact device architecture that achieves high performance in the millimeterwave-to-terahertz (mmW-THz) region are proposed and investigated through simulation. The significant change in conductivity in semiconductors caused by photogenerated carriers is used to develop RF switches having very high performance. By including a thin layer of insulator between the active semiconductor material and the metal contacts, the carrier concentration can be enhanced over that of conventional devices. For a prototype demonstration, G-band coplanar waveguide-based optical switches (using Si and Ge as active materials) with different contact geometries have been modeled and simulated. The proposed switches outperform both conventional solid-state switches and phase-change material-based switches in the switch figure-of-merit, and are promising for developing a novel class of tunable and reconfigurable mmW-THz circuits for advanced sensing, imaging, and communication.
3 February 2025 in IEEE Transactions on Terahertz Science and Technology
We report the first experimental demonstration of an alternative approach for achieving integrated broadband terahertz (THz) switching functionality, based on photoconductivity modulation in thin film Si on low-loss sapphire substrates. By employing a silicon thin film mesa (14×14 μm²) on a Silicon-on-Sapphire (SoS) substrate (with 1.5-μm-thick silicon and 600-μm-thick sapphire), an optically-controlled THz switch integrated with low-loss CPW transmission lines operating from 110 GHz to 220 GHz has been designed, fabricated, and characterized. To control the switch in this prototype demonstration, a 915 nm laser diode was used to illuminate the silicon mesa through an optical fiber. The switch performance was measured on-wafer in both D- and G-band; an average on-state insertion loss of ∼3.5 dB (with minimum insertion loss of 2.5 and 1.8 dB at 160 and 200 GHz), and an off-state isolation greater than 20 dB across the entire frequency range have been achieved. This performance can be further greatly improved, and is comparable to or better than competing approaches, with the advantage that this approach allows seamless integration of the switch with passive components on low-loss sapphire substrates. This makes the reported approach promising for developing high-performance and compact THz switches for next-generation adaptive circuits and systems.
We present a photoinduced reconfigurable metasurface to enable high spatial resolution terahertz (THz) wave modulation. Conventional photoinduced THz wave modulation uses optically induced conductive patterns on a semiconductor substrate to create programmable passive THz devices. The technique, albeit versatile and straightforward, suffers from limited performance resulting from the severe lateral diffusion of the photogenerated carriers that undermines the spatial resolution and conductivity contrast of the photoinduced conductive patterns. The proposed metasurface overcomes the limitation using a metal-jointed silicon mesa array with subwavelength-scaled dimensions on an insulator substrate. The structure physically restrains the lateral diffusion of the photogenerated carriers while ensuring the electrical conductivity between the silicon mesas , which is essential for THz wave modulation. The metasurface creates high-definition photoconductive patterns with dimensions smaller than the diffusion length of photogenerated carriers. The metasurface provides a modulation depth of −20 to −10 dB for the THz waves between 0.2 to 1.2 THz and supports a THz bandpass filter with a tunable central frequency. The new, to the best of our knowledge, design concept will benefit the implementation of reconfigurable THz devices.
26 September 2022 in IEEE Transactions on Terahertz Science and Technology
A novel and cost-effective approach for high resolution terahertz imaging using photo-induced coded-apertures on micromachined mesa array structures is reported. The mesa-array structures are designed to have subwavelength electrically-isolated mesas for generation of high-fidelity photopatterns for THz imaging. A Si mesa array prototype structure was successfully fabricated and tested. Measurements show that a modulation depth of ∼22 dB was obtained in the frequency range of 740-750 GHz under a light intensity of 11.7 W/cm 2 , which agrees well with theoretical analysis and full-wave simulation. Initial imaging experiments were first performed using 64 pixels (over different areas) for validation and performance evaluation. More advanced imaging using quadrupled pixel number (256 pixels) was conducted in order to resolve subwavelength features. As a result, a wavelength-scale spatial resolution of 400 µm has been successfully demonstrated, and a subwavelength resolution as small as ∼250 µm (0.625λ at 740 GHz) has been shown to be potentially achievable. The proposed photo-induced coded aperture imaging using mesa arrays is promising for developing real-time high-resolution THz imaging with simple system and low cost.
We introduce a finite-difference frequency-domain algorithm for coupled acousto-optic simulations. First-principles acousto-optic simulation in time domain has been challenging due to the fact that the acoustic and optical frequencies differ by many orders of magnitude. We bypass this difficulty by formulating the interactions between the optical and acoustic waves rigorously as a system of coupled nonlinear equations in frequency domain. This approach is particularly suited for on-chip devices that are based on a variety of acousto-optic interactions such as the stimulated Brillouin scattering. We validate our algorithm by simulating a stimulated Brillouin scattering process in a suspended waveguide structure and find excellent agreement with coupled-mode theory. We further provide an example of a simulation for a compact on-chip resonator device that greatly enhances the effect of stimulated Brillouin scattering. Our algorithm should facilitate the design of nanophotonic on-chip devices for the harnessing of photon-phonon interactions.
16 March 2022 in IEEE Microwave and Wireless Components Letters
We report the design, fabrication, and prototype demonstration of a 200-GHz polarization-resolved quasi-optical detector employing monolithically integrated zero-bias heterostructure backward diodes (HBDs). In this design, polarization resolution is achieved by orthogonally integrating the detectors with a planar dual-polarization annular-slot antenna. The detector chip was fabricated and mounted on an extended hemispherical Si lens to enhance antenna efficiency in the millimeter-wave to terahertz region. The responsivity and radiation patterns of the detector were characterized experimentally; good agreement with theoretical calculations was obtained. By measuring the outputs of two orthogonal HBDs as a function of the polarization angle of the incident wave, the planar detector detects intensity and resolves polarization. On the basis of the polarimetric measurement, we further demonstrate the polarization imaging capability of the proposed detector by using it as an imaging system. The detector is promising for developing terahertz polarimetric sensors and imaging arrays in chemical sensing, biomedical imaging, and radio astronomy applications.