This study focuses on the growth of Cu₂O/CuO nanowires by one-step thermal oxidation using a flexible copper mesh at oxidation temperatures in the range of 300 to 600 °C in a controlled atmosphere of mixed-flow Ar and O₂ gases. Thermal oxidation is one of the simplest used methods to obtain nanowires on a metal surface, offering advantages such as low production costs and the ability to produce metal oxides on a large scale without the use of hazardous chemical compounds. The growth of metal oxides on a conductive substrate, forming metal/oxide structures, has proven to be an effective method for enhancing charge-transfer efficiency. The as-synthesized Cu/Cu₂O/CuO (Nw) electrodes were structurally and morphologically characterized using techniques such as XRD and SEM/EDX analysis to investigate the structure modification and morphologies of the materials. The supercapacitor properties of the as-developed Cu/Cu₂O/CuO (Nw) electrodes were then examined using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) measurements, and electrochemical impedance spectroscopy (EIS). The CV curves show that the Cu/Cu₂O/CuO (Nw) structure acts as a positive electrode, and, at a scan rate of 5 mV s ⁻¹, the highest capacitance values reached 26.158 mF cm⁻² for the electrode oxidized at a temperature of 300 °C. The assessment of the flexibility of the electrodes was performed at various bending angles, including 0°, 45°, 90°, 135°, and 180°. The GCD analysis revealed a maximum specific capacitance of 21.198 mF cm⁻² at a low power density of 0.5 mA cm⁻² for the oxidation temperature of 300 °C. The cycle life assessment of the all of the as-obtained Cu/Cu₂O/CuO (Nw) electrodes over 500 cycles was performed by GCD analysis, which confirmed their electrochemical stability.

The heterojunction based on n-TiO₂ nanolayer/p-CuMnO₂ thin film was achieved using an efficient two-step synthesis process for the fabrication of a UV photodetector. The first step consisted of obtaining the TiO₂ nanolayer, which was grown on titan foil by thermal oxidation (Ti-TiO₂). The second step consisted of CuMnO₂ thin film deposition onto the surface of Ti-TiO₂ using the Doctor Blade method. Techniques such as X-ray diffraction, UV-VIS analysis, SEM, and AFM morphologies were used for the investigation of the structural and morphological characteristics of the as-synthesized heterostructures. The Mott–Schottky analysis was performed in order to prove the n-TiO₂/p-CuMnO₂ junction. The I-V measurements of the n-TiO₂ nanolayer/p-CuMnO₂ thin film heterostructure confirm its diode characteristics under dark state, UV and visible illumination conditions. The obtained heterojunction, which is based on two types of semiconductors with different energy band structures, improves the separating results of charges, which is very important for high-performance UV photodetectors.

Due to population growth and global technological development, energy consumption has increased exponentially. The global energy crisis opens up many hotly debated topics regarding energy generation and consumption. Not only is energy production in short supply due to limited energy resources but efficient and sustainable storage has become a very important goal. Currently, there are energy storage devices such as batteries, capacitors, and super-capacitors. Supercapacitors or electrochemical capacitors can be very advantageous replacements for batteries and capacitors because they can achieve higher power density and energy density characteristics. The evolution and progress of society demand the use of innovative and composite nanostructured metal oxide materials, which fulfill the requirements of high-performance technologies. This review mainly addresses the synthesis techniques and properties of 2D and 3D metal oxide nanostructured materials, especially based on Ti, Fe, Ga, and Sn ions, electrochemical methods used for the characterization and application of 2D, and 3D nanostructured metal oxide structures in electrochemical storage systems of energy.