The aim of this work is the design and 3D printing of a new electrochemical sensor for the detection of Listeria monocytogenes based on loop mediated isothermal amplification (LAMP). The food related diseases involve a serious health issue all over the world. Listeria monocytogenes is one of the major problems of contaminated food, this pathogen causes a disease called listeriosis with a high rate of hospitalization and mortality. Having a fast, sensitive and specific detection method for food quality control is a must in the food industry to avoid the presence of this pathogen in the food chain (raw materials, facilities and products). A point-of-care biosensor based in LAMP and electrochemical detection is one of the best options to detect the bacteria on site and in a very short period of time. With the numerical analysis of different geometries and flow rates during sample injection in order to avoid bubbles, an optimized design of the microfluidic biosensor chamber was selected for 3D-printing and experimental analysis. For the electrochemical detection, a novel custom gold concentric-3-electrode consisting in a working electrode, reference electrode and a counter electrode was designed and placed in the bottom of the chamber. The LAMP reaction was optimized specifically for a primers set with a limit of detection of 1.25 pg of genomic DNA per reaction and 100% specific for detecting all 12 Listeria monocytogenes serotypes and no other Listeria species or food-related bacteria. The methylene blue redox-active molecule was tested as the electrochemical transducer and shown to be compatible with the LAMP reaction and very clearly distinguished negative from positive food samples when the reaction is measured at the end-point inside the biosensor.
New energy storage materials are an object of study within the framework of the global energy transition. The development of renewable sources is being boosted thanks to stationary energy storage systems such as redox flow batteries (RFBs). This work reports the synthesis of the cobalt-containing Keggin-type polyoxometalates [CoW12O40]6− (CoW12) and [Co(H2O)SiW11O39]6− (CoSiW11), which have previously been shown to have applicability in RFBs. These procedures were reassessed to meet the strict requirements associated with the further implementation of RFBs, including fast and affordable synthetic procedures with high reaction yields. In contrast to the lengthy and complicated synthetic approaches published to date, the optimized synthesis reported in this work enables the isolation of the pure crystalline salt of the CoW12 anion with a 75% reduction of the time of the whole reaction procedure, eliminating tedious steps such as the recrystallization and including a 20% increased yield. The control of the stoichiometry, fine-tuning of reaction conditions, and the identification of intermediate species, as well as the acidic equilibria taking place during the process, were monitored via thermal, spectroscopic, and structural analyses. In the case of the CoSiW11 anion, its preparation was based on a simple and highly efficient procedure. Moreover, promising electrochemical properties were observed with the use of the one-pot synthetic approach, in which the stoichiometric amounts of the starting reagents are dissolved in the supporting electrolyte to be directly implemented as the electrolyte for a RFB.