The use of flow batteries for energy storage has attracted considerable attention with the increased use of renewable resources. It is well known that the performance of a flow battery depends, among other factors, on the properties of the electrodes, which are generally composed of graphite felt (GF). In this work, thermal, chemical and plasma treatments have been employed to modify the surface of the graphite felt to improve the electrochemical activity of the redox flow cell. The influence of the variables of each of these processes on the generation of surface functional groups and on changes in the obtained surface area have been examined. In this work, the kinetics of redox reactions relevant to the VO2+/VO2+ reaction have been studied with these treated electrodes and the relationship between the nature of the surface and electrochemical activity of the GF is discussed. As a result, an enhanced electrochemical performance (reduction over 200 mV of the separation between anodic and cathodic peaks and 110 mV of the onset potential) in comparison to the untreated GF is obtained for those GF treatments with low oxygenated groups concentration.
New energy storage materials are an object of study within the framework of the global energy transition. The development of renewable sources is being boosted thanks to stationary energy storage systems such as redox flow batteries (RFBs). This work reports the synthesis of the cobalt-containing Keggin-type polyoxometalates [CoW12O40]6− (CoW12) and [Co(H2O)SiW11O39]6− (CoSiW11), which have previously been shown to have applicability in RFBs. These procedures were reassessed to meet the strict requirements associated with the further implementation of RFBs, including fast and affordable synthetic procedures with high reaction yields. In contrast to the lengthy and complicated synthetic approaches published to date, the optimized synthesis reported in this work enables the isolation of the pure crystalline salt of the CoW12 anion with a 75% reduction of the time of the whole reaction procedure, eliminating tedious steps such as the recrystallization and including a 20% increased yield. The control of the stoichiometry, fine-tuning of reaction conditions, and the identification of intermediate species, as well as the acidic equilibria taking place during the process, were monitored via thermal, spectroscopic, and structural analyses. In the case of the CoSiW11 anion, its preparation was based on a simple and highly efficient procedure. Moreover, promising electrochemical properties were observed with the use of the one-pot synthetic approach, in which the stoichiometric amounts of the starting reagents are dissolved in the supporting electrolyte to be directly implemented as the electrolyte for a RFB.
The pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused more than 6 million deaths all over the world, demonstrating the need for a simple, fast and cost-effective point-of-care (POC) test for the detection of the virus. In this work, we developed an electrochemical sensor for SARS-CoV-2 virus detection on clinical samples based on loop-mediated isothermal amplification (LAMP). With the development of this novel sensor, the time of each measurement is significantly reduced by avoiding the DNA extraction step and replacing it with inactivation of the sample by heating it at 95 °C for 10 min. To make the reaction compatible with the sample pre-treatment, an RNase inhibitor was added directly to the premix. The LAMP product was measured in a novel, easy-to-use manufactured sensor containing a custom-made screen-printed carbon electrode. Electrochemical detection was performed with a portable potentiostat, and methylene blue was used as the redox-transducing molecule. The developed sensor achieved a limit of detection of 62 viral copies and was 100% specific for the detection of the SARS-CoV-2 virus. The performance of the electrochemical sensor was validated with nasopharyngeal samples, obtaining a sensibility and specificity of 100% compared to the gold standard RT-PCR method.
Redox Flow Batteries (RFBs) are promising large-scale Energy Storage Systems, which support the integration of renewable energies into the current electric grid. Emerging chemistries for electrolytes, such as Polyoxometalates (POMs), are being studied. POMs have attracted great interest because of their reversible multi-electron transfers and the possibility of tuning their electrochemical properties. Recently, the cobalt-containing Keggin-type species [CoW12O40]6− (CoW12) has been successfully implemented in a symmetric RFB, and its further implementation calls for new materials for the membrane to enhance its cell performance. In this work, different types of ion exchange membranes (Nafion™-NR212, FAPQ-330 and Amphion™) were tested. The electrolyte uptake, swelling, conductivity and permeability of the membranes in the CoW12 electrolyte, as well as a detailed cell performance study, are reported herein. Better performance results ascribed to the robustness, efficiency and energy density of the system were found for Nafion™-NR212, with 88.5% energy efficiency, 98.9% capacity retention and 3.1 Wh L−1 over 100 cycles at 20 mA cm−2. FAPQ-330 and Amphion membranes showed large capacity fade (up to 0.2%/cycle). Crossover and the low conductivity of these membranes in the mild pH conditions of the electrolyte were revealed to be responsible for the reduced cell performance.