Jing chen

Dr. Jing chen

Nanjing University of Posts and Telecommunications, Nanjing, Jiangsu, China
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2022 in Crystals
Verified
Journal Article
Open access
PDF file
MZMaolin Zhang
Maolin Zhang
ZLZeng Liu
Zeng Liu
LYLili Yang
Lili Yang
JYJiafei Yao
Jiafei Yao
Jing chenJing chen
Jing chen
Weihua TangWeihua Tang
Weihua Tang
Ga2O3 has gained intensive attention for the continuing myth of the electronics as a new-generation wide bandgap semiconductor, owing to its natural physical and chemical properties. In this review article, we selectively summarized the recent advances on the experimental and theoretical demonstration of β-Ga2O3-based power devices, including Schottky barrier diodes and field-effect transistors, aiming for an inherent comprehending of the operating mechanisms, discussion on the obstacles to be addressed, and providing some comprehensive guidance for further developments. In the short run, Ga2O3 may well be promising to lead power electronics.

3 February 2020 in IEEE Access
Verified
Journal Article
Open access
Jing chenJing chen
Jing chen
MAMohamed Baker Alawieh
Mohamed Baker Alawieh
YLYibo Lin
Yibo Lin
MZMaolin Zhang
Maolin Zhang
JZJUN ZHANG
JUN ZHANG
DPDavid Z. Pan
David Z. Pan
The breakdown performance is a critical metric for power device design. This paper explores the feasibility of efficiently predicting the breakdown performance of silicon on insulator (SOI) lateral power device using multi-layer neural networks as an alternative to expensive technology computer-aided design (TCAD) simulation. In this work, we propose the first breakdown performance prediction framework, PowerNet, for SOI lateral power devices, based on deep learning methods. The framework can provide breakdown location prediction and breakdown voltage (BV) prediction by utilizing a two-stage machine learning method. In addition, it demonstrates 97.67% accuracy on breakdown location prediction and less than 4% average error on the BV prediction compared with TCAD simulation. The proposed method can be used to measure changes in performance caused by random variability in structural parameters during manufacturing process, allowing designers to avoid unstable structural parameters and enhance design robustness. More importantly, it can significantly reduce the computational cost when compared with the TCAD simulation. We believe the proposed machine learning technique can significantly speedup the design space exploration for power devices, eventually reducing the overall product-to-market time.

3 August 2020 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
Jing chenJing chen
Jing chen
MAMohamed Baker Alawieh
Mohamed Baker Alawieh
YLYibo Lin
Yibo Lin
MZMaolin Zhang
Maolin Zhang
JZJUN ZHANG
JUN ZHANG
DPDavid Z. Pan
David Z. Pan
The selection of design structure parameters is a critical step for meeting the performance requirement for silicon on insulator (SOI) lateral power devices, especially when multiple design constraints are presented. In this letter, we propose a fully-automated structural design method for SOI lateral power device based on a Bayesian optimization (BO) framework. Given the design target characterized by breakdown voltage (BV) and on-resistance (Ron) specifications, the proposed approach searches for the optimal structure that can satisfy the constraints. The experimental results demonstrate that designs obtained from our optimization framework fall within 5% range from the desired specifications when evaluated using technology computer-aided design (TCAD) simulation, which proves the efficiency of the proposed approach. Besides, the efficiency of our proposed approach is reflected by its runtime which does not exceed 10 minutes for more than 70% of the cases. We believe that this modeling method can greatly accelerate the design exploration process of power devices for designers.

22 March 2019 in Journal of Micro/Nanolithography, MEMS, and MOEMS
Verified
Journal Article
Closed access
PDF file
Jing chenJing chen
Jing chen
YLYibo Lin
Yibo Lin
YGYufeng Guo
Yufeng Guo
MZMaolin Zhang
Maolin Zhang
MAMohamed Baker Alawieh
Mohamed Baker Alawieh
DPDavid Z. Pan
David Z. Pan
With the shrinking feature sizes of semiconductor devices, manufacturing challenges increase dramatically. Among these challenges, lithography hotspot stands out as a prominent ramification of the growing gap between design and manufacturing. Practically, a hotspot refers to the failure in printing desired patterns in lithography. As lithography hotspots have significant impacts on manufacturing yield, the detection of hotspots in the early design stage is desired to achieve fast design closure. We propose a lithography hotspot detection framework using a double inception module structure. This structure performs better in both accuracy and false alarms by widening the conventional stacked structure to benefit feature extraction and using global average pooling to keep the spatial information. Experimental results show that the proposed structure achieves better performance than existing methods.

15 December 2021 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JZJUN ZHANG
JUN ZHANG
JZJiayi Zhou
Jiayi Zhou
YWYuhao Wang
Yuhao Wang
MLMan Li
Man Li
LDLing Du
Ling Du
Yufeng GuoYufeng Guo
Yufeng Guo
The application of organic field-effect transistors (OFETs) in the power device realm has not been explored yet. To achieve a high breakdown voltage, a novel lateral drift region OFET(LDR-OFET) is proposed in this letter. By employing the diketopyrrolopyrrole-based polymer(DPPT-TT) and Poly (methyl methacrylate) (PMMA) to form semiconductor and insulator layers respectively, the fabricated LDR-OFET, despite the simple process and low cost, exhibits an excellent off-state breakdown capability while maintaining a considerable on-state performance. With a $20~\mu \text{m}$ length of the drift region, the LDR-OFET realizes 2200V breakdown voltage on a spin-coated 50nm thick semiconductor layer. The average electric field of the proposed device reaches 1.18MV/cm before an avalanche-like breakdown occurs. The physical nature of the breakdown mechanism is explored using the 1-D PIN equivalent structure and avalanche breakdown theory. The correctness and effectiveness of the proposed LDR-OFET and breakdown analysis are well demonstrated and validated by experimental results. The LDR-OFETs are expected to fill the blank of organic power devices and be the core component of future organic power integrated circuits.

4 April 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
JYJiafei Yao
Jiafei Yao
MSMingshun Sun
Mingshun Sun
TXTianci Xu
Tianci Xu
XLXin Liu
Xin Liu
LMli man
li man
Yufeng GuoYufeng Guo
Yufeng Guo
The silicon-on-insulator (SOI) lateral double-diffused metal–oxide–semiconductor (LDMOS) with high- $\textit{k}$ multi-fingers (HKMFs) is proposed and investigated. The fingertips are distributed at specific locations to modulate the electric field distributions and improve the device performances. First, the electric field peaks formed at the fingertips could optimize the electric field distributions, which improves the breakdown voltage (BV) of the LDMOS effectively. Meanwhile, the multi-fingers are embedded into the drift region to increase the optimal drift doping concentration, which facilitates the positive conduction of the device and reduces the specific ON-resistance ( $\textit{R}_{\text{on,\text{sp}}}\text{)}$ . The simulation results show that the proposed HKMF-LDMOS with five multi-fingers increases the BV by 59.2%, reduces $\textit{R}_{\text{on,\text{sp}}}$ by 37.8%, and improves the figure of merit (FOM) by 4.07 times when compared to the conventional LDMOS.