In precision agriculture, it is possible to use satellite monitoring of fields. Satellite monitoring systems allow you to get free images with a resolution of up to 10 m per pixel, which is sufficient to determine the state of vegetation of plants on such indicators as the normalized vegetation index NDVI. However, the NDVI indicator already indicates the existing problems of correction which will not help to restore the lost yield of crops, but only helps to prevent further losses. Using the NDSI soil salinity index, it is possible to determine the difference in its properties from spectral images. Also, you can study the vegetation of plants in the early stages of their development, in fact immediately after germination. Soil-adjusted vegetation index, such as MSAVI, is used for this purpose. Studies indicate the possibility of using NDSI and MSAVI indicators for early diagnosis of confirmed crops NDVI and NDRE (indicating chlorophyll activity in plants) at later stages of their development. Studies conducted on soybean, spring barley and maize crops sown in the spring of 2021 indicate a correspondence between raster field maps show-ing the above indices made from March to July. Statistical analysis of raster images of field maps using specialized software showed a correlation between NDSI and MSAVI in March and May, respectively, with NDVI and NDRE indexes in June and July. Therefore, it is possible to judge the expediency of using NDSI and MSAVI indicators for early diagnosis of possible problems with plant vegetation, as well as for the creation of maps of differential fertilization.
The problem of modelling a smooth contour with a regular change in curvature representing a monotone curve with specified accuracy is solved in this article. The contour was formed within the area of the possible location of a convex curve, which can interpolate a point series. The assumption that if a sequence of points can be interpolated by a monotone curve, then the reference curve on which these points have been assigned is monotone, provides the opportunity to implement the proposed approach to estimate the interpolation error of a point series of arbitrary configuration. The proposed methods for forming a convex regular contour by arcs of ellipses and B-spline ensure the interpolation of any point series in parts that can be interpolated by a monotone curve. At the same time, the deflection of the contour from the boundaries of the area of the possible location of the monotone curve can be controlled. The possibilities of the developed methods are tested while solving problems of the interpolation of a point series belonging to monotone curves. The problems are solved in the CAD system of SolidWorks with the use of software application created based on the methods developed in the research work.
The paper addresses the problem of modeling a smooth contour interpolating a point series belonging to a curve containing no special points, which represents the original curve with specified accuracy. The contour is formed within the area of possible location of the parts of the interpolated curve along which the curvature values are monotonously increased or decreased. The absolute interpolation error of the point series is estimated by the width of the area of possible location of the curve. As a result of assigning each intermediate point, the location of two new sections of the curve that lie within the area of the corresponding output section is obtained. When the interpolation error becomes less than the given value, the area of location of the curve is considered to be formed, and the resulting point series is interpolated by a contour that lies within the area. The possibility to shape the contours with arcs of circles specified by characteristics is investigated.
The paper considers the issues of maintaining an equality of flow in generated and consumed electric energy in an electric network incorporating an electric power storage system. An analysis of ways to equalize the energy and power balance was carried out, and the advantages of using electricity storage systems in electrical networks was assessed. Upon simulation using the Power Factory program, we noted that, after switching on the load, a transient process occurs, characterized by a jump in active power, which was caused by the need for time to initiate the electric energy storage system. However, immediately after this, the process of issuing the accumulated energy to the electrical network and compensating for energy consumption began. Moreover, when the load was disconnected, there is a certain dip in the active power curve and a further increase in consumption. This was found to be due to the transition of the electricity storage system to the modes of energy storage and battery charging. As a result of this simulation, data on the charging and discharging time of the electricity storage system were obtained. The studies show that the use of electricity storage systems in electrical networks allows for the stable operation of all main generators, and thus increases the safety and reliability of the entire system.
During the design of extra-high-voltage transmission lines, studies of the influence of asymmetry due to the phase difference of the parameters on its processes and the electrical network were performed. To compensate for this source of asymmetry for transmission lines longer than 100 km, a relatively simple technical means was proposed and implemented—phase transposition (change of the mutual location of phase wires in space). However, at the same time transposition causes additional capital costs in construction and reduces reliability during operation, so when designing a specific transmission line, extra-high-voltage is desirable to evaluate the effectiveness of the use of this measure in the real electricity network. Thus, under certain conditions, even for a transmission line 600 km in length, it was possible to perform either an incomplete transposition cycle, or abandon this measure altogether.
The possibilities of the action of uneven air flows on the grain material in the separating channels are still not used enough. The reason for this is the insufficient knowledge of the processes of interaction of the components of the grain material with an uneven air flow. The purpose of the research is to increase the efficiency of grain material separation according to aerodynamic properties by purposefully changing the diagram of air velocities in the channel sections using the actions of lateral and aerodynamic forces. The separation efficiency of grain material components was determined by trajectory analysis. The different geometry of the pneumatic separation channel was studied. The study of the distribution of air velocity and air pressure vectors in a vertical annular channel was carried out using the FlowVision software. It has been established that a change in the air velocity diagram can be implemented both by changing the geometric parameters of the channel and by additional distributed air supply through the perforation in the side walls of the pneumatic channel. Based on the analysis of the velocity field, an improved scheme of a pneumatic gravitational separator is proposed for separating grain material into three fractions according to aerodynamic characteristics.