(1) Background: The treatment of dental cavities and restoration of tooth shape requires specialized materials with specific clinical properties, including being easy to model, light-cured, having a natural color, reduced shrinkage, a hardness similar to hydroxyapatite, and no leakage. The dimensional stability of resin composite materials is affected by polymerization shrinkage, degree of conversion (number of π carbon bonds converted into σ ones), thermal contraction and expansion, and interactions with an aqueous environment. (2) Methods: The materials used in our investigation were two composite resins with similar polymer matrices, but different filler (micro/nano filler). To evaluate the properties of samples, we employed the pycnometer technique (pycnometer from Paul Marienfeld Gmbh, Lauda-Königshofen, Germany), RAMAN spectroscopy technique (MiniRam Equipment from B&W Tek Inc., Plainsboro Township, NJ, USA; 785 nm laser source), SEM and EDX (FEI Inspect S.). (3) Results: The size of the filler plays an important role in the polymerization: for the pycnometric results, the larger particle filler (Sample 1) seems to undergo a rapid polymerization during the 45 s curing, while the nanoparticle filer (Sample 2) needs additional curing time to fully polymerize. This is related to a much larger porosity, as proved by SEM images. The lower degree of conversion, as obtained by Raman spectroscopy, in the same geometry means that the same volume is probed for both samples, but Sample 1 is more porous, which means less amount of polymer is probed for Sample 1. (4) Conclusions: For the two composites, we obtained a degree of conversion of 59% for Sample 1 and 93% for Sample 2, after 45 s of curing.

Background and Objectives: The SARS-CoV-2 pandemic led to changes in population daily patterns. In order to adapt oral health promotion measures for future similar conditions, the main objective of the study was to assess changes in dental hygiene and eating and smoking habits during the government lockdown in Romania. Materials and Methods: The cross-sectional study was conducted immediately after the end of the lockdown and consisted of 800 adult subjects. Data collection was done via an online survey. Participants were divided into two groups: non-medical/dental practitioners (N-M/D group) and medical/dental practitioners (M/D group). Results: An increased use of dental floss from 27% (pre-lockdown) to 30.5% (during lockdown) was identified in the M/D group, while the manual toothbrush usage increased to 64.8% (during lockdown) from 61.7% (pre-lockdown) in the N-MD/group. No significant differences regarding toothbrushing frequency were observed in either group. A change in the number of daily snacks was identified in both groups (3–4 snacks per day: from 11% to 20.2% in the N-M/D group, from 13.1% to 22.2% in the M/D group). The consumption of sweets as a preferred snack was also noticed. A decrease of tobacco consumers was assessed in the lockdown period (from 66.6% to 60.4% in the M/D group, from 68.5% to 61.9% in the N-/M/D group). Conclusions: Oral habits were changed during the pandemic lockdown through the increase in the frequency of the consumption of snacks and sweets and the decrease in frequency of smokers. Only minor changes were observed in oral hygiene.

This study aims to assess the conversion degree and hardness behavior of two new commercial dental restorative composites that have been submitted to light curing in different environments (air and glycerin, respectively) at various distances from the light source (1 to 5 mm) and to better understand the influence of the preparation conditions of the restorative materials. Through FT-IR spectrometry, the crosslinking degree of the commercial restorative materials have been investigated and different conversion values were obtained (from ~17% to ~90%) but more importantly, it was shown that the polymerization environment exhibits a significant influence on the crosslinking degree of the resin-based composites especially for obtaining degrees of higher polymerization. Additionally, the mechanical properties of the restorative materials were studied using the nanoindentation technique showing that the nano-hardness behavior is strongly influenced not only by the polymerization lamp position, but also by the chemical structure of the materials and polymerization conditions. Thus, the nanoindentation results showed that the highest nano-hardness values (~0.86 GPa) were obtained in the case of the flowable C3 composite that contains BisEMA and UDMA as a polymerizable organic matrix when crosslinked at 1 mm distance from the curing lamp using glycerin as an oxygen-inhibitor layer.

(1) Background: A widespread problem in oral health is cavities produced by cariogenic bacteria that consume fermentable carbohydrates and lower pH to 5.5–6.5, thus extracting Ca²⁺ and phosphate ions (PO₄³⁻) from teeth. Dental restorative materials based on polymers are used to fill the gaps in damaged teeth, but their properties are different from those of dental enamel. Therefore, a question is raised about the similarity between dental composites and natural teeth in terms of density and hardness. (2) Methods: We have used Raman spectroscopy and density and microhardness measurements to compare physical characteristics of several restorative dental composites at different polymerization intervals. (3) Results: XRVHerculite^®, Optishade^®, and VertiseFlow^® showed the very different characteristics of the physical properties following four polymerization intervals. Of the three composites, OptiShade showed the highest polymerization rate. (4) Conclusions: Only fully polymerized composites can be used in teeth restoring, because incomplete polymerization would result in cracks, pitting, and lead finally to failure.

The Dental Neglect Scale (DNS) is a well-known measure for assessing behaviours and attitudes related to oral health. However, the factor inconsistency revealed by the literature involves further investigations. The study focuses on the validation of the DNS in the case of a sample of the adult population from Romania. In this regard, data were collected online from 872 adults (616 females and 256 males). DNS reliability was examined from the perspective of internal consistency. Convergent validity was performed by associating DNS with different scales from the oral health field. In order to examine and confirm the factorial structure, the sample was broken down into two subsamples which made the subject of the exploratory factorial analysis (EFA) and confirmatory factorial analysis (CFA), respectively. DNS-RO is positively associated with the scale which measures the values related to oral health (OHVS) and negatively with those that assess the impact of the oral health on life quality (OHIP-14), the distrust of the benefits of oral health services (R-DBS), and reduced need for oral care (DIS). The Cronbach’s α = 0.70, McDonald’s ω = 0.70 and CR = 0.77 are acceptable. Both EFA and CFA (χ²/df = 1.13; CFI = 0.99; RMSEA = 0.017; SRMR = 0.059) support the unifactorial structure of the scale. The gender differences show that females evince greater care for oral health than male subjects. The study shows that the DNS-RO can be used to assess the behaviours and attitudes towards oral health in the case of the Romanian adult population in epidemiological studies and health promotion programs through health education.

Oral health promotion among adolescence is necessary due to the vulnerability specific to their age, such as the debut of smoking habits and the neglecting the dental services utilization. Taking into consideration the tendency of teenagers to be reluctant to conventional education, experiential learning is a more appropriate method for this target group since the participants are engaged in interactive activities with respect to a learning circle “Do”, “Observe”, “Think”, “Plan”, as described by David Kolb. The present paper describes the experiential learning activities used for oral health education of a group of 13-17 years-old adolescents in Bucharest, Romania enrolled in a 2-year longitudinal study as part of “Com4you” oral health promotion program. The activities described were part of the third lesson offered during the program and this last one approached as oral health subjects the importance regular visits to the dental office and the oral health risks of tobacco consumption. Students showed interest to both the subjects and the method and the results of the program showed greater changes in the adolescents’ oral health-related behavior when this method was used compared to traditional learning.