The increase in non-face-to-face lifestyles due to COVID-19 worldwide have shown an increase in delivery services. The number of parcels in 2020 was 3.373 billion, an increase of 20.9% from 2.788 billion in 2019. This phenomenon increased delivery box waste. Against this background, this study attempted to develop building materials from the recycling of delivery boxes. In this study, the self-developed WC (wet cellulose) 3D printer confirmed the standardization and uniform performance of the sample by filling the material supply cylinder with cellulose filaments and spraying the composite material through a 10 mm nozzle. The cellulose filament for a WC 3D printer is based on cellulose extracted from wastepaper, and a cellulose filament composite material is used by mixing additives. After manufacturing a specimen using the WC 3D printer, a reliability test for the flame-retardant performance of the material was conducted according to the ISO 11925-2 test method. As a result of the experiment, flame-retardant performance was confirmed at a 40 wt% or greater ceramic binder content. In addition, the WC 3D printer achieved accurate test results by producing specimens with uniform physical properties. In addition, we confirmed that 3D-printed WC can be used to develop customized building materials that can prevent fire spread.
The burning of building finishing materials containing chemical substances can lead to the spread of fire with a large number of harmful substances. To prevent this, cellulose, an eco-friendly material that minimizes the generation of harmful substances, was chosen as the main material for building finishing materials. Wastepaper was recycled to extract cellulose, and a finishing material was manufactured by mixing in expandable graphite and magnesium hydroxide. The flame-retardant performance of the finishing material was evaluated by measuring the total heat emission rate using the ISO 5660-1 cone calorimeter, with the particle size of the expanded graphite as a variable. The measured physical properties value was used as the FDS parameter to evaluate the risk of fire. Results show that the cellulose-based building finishing material meets the life safety standard of NFSC 203 during the simulation time and has a FED value that does not exceed 0.001 at maximum. This confirms its effectiveness in providing safe egress time for residents.
The impact of non-face-to-face contact following the COVID-19 pandemic has emerged as a social problem and has increased the amount of wastepaper, mainly in home delivery boxes. The appropriate recycling of paper waste is an area where sustainable growth is required in terms of the net environment system and carbon neutrality practice. Therefore, in this study, a specimen of building finishing material using wastepaper was produced using a custom-made large wet cellulose (LWC) 3D printer, and the site applicability of the fire performance was evaluated. The specimen of the building finish material was a mixture of wastepaper and ceramic binder, and the molding of the specimen was uniformly produced by a cylinder injection-type LWC 3D printer. The production reliability of the 3D printer was analyzed by measuring the mass and density of the specimen. The uniformity of the mass and density of the manufactured building finishes were confirmed to have standard deviations of ±0.05 g and ±0.01 g/cm3, respectively. The uniformity of the fire performance of specimens was confirmed by checking the relative standard deviation (RSD) value of ±3% under the same ceramic addition conditions from ISO 5660-1. Through the mass and density analysis and fire performance analysis of the building finishing materials, it was confirmed that the same mass, density, and fire performance can be produced simultaneously, and manufacturing using LWC 3D printers has been confirmed to be effective in developing uniform semi-non-combustible and retardant building materials.
As the construction of high-rise buildings increases to solve residential spaces caused by high density population concentration, the occurrence of fire accidents in high-rise buildings is also increasing. The primary cause of fire damage in high-rise buildings is the spread of fire caused by exterior wall finishes. Therefore, it is essential to develop semi-non-combustible finishes that can be applied to high-rise buildings to prevent the spread of fire due to exterior wall finishes. To address this issue, numerous studies are being conducted to develop flame retardant finishing materials that reduce heat release rate and total heat release. A double flame retardant mixed waste paper with expandable graphite and magnesium hydroxide was manufactured to improve the fire performance of cellulose building finishing materials. Total heat release (THR), CO, and CO2 Generation changes were measured using a cone calorimeter, and thermal diffusion rate was measured through the LFA 1000 experiment. The correlation of total heat release, CO generation, CO2 generation, and mass reduction rate by variation of expandable graphite's mesh size at double flame-retardant waste paper were secured through a cone calorimeter test. The thermal diffusion rate data of the specimen were secured through the LFA 1000 experiment. Through experiments, it has been confirmed that specimens using specific expandable graphite particles can be utilized as fire-resistant finishing materials in construction, ensuring fire resistance performance.
Modulating the oxidation states of transition metal species is a practical approach to enhance redox activity and increase the number of active sites in electrode materials. Herein, we describe a simple one-step hydrothermal approach to prepare CoxSy with two different phases, cobalt pyrite (CoS2) and cobalt pentlandite (Co9S8), to explain the influence of material microstructure and properties on electrochemical performance. The as-prepared CoS2 and Co9S8 were investigated as symmetric supercapacitor (SC) devices for potential energy storage applications. Co9S8 exhibited the highest specific gravimetric capacitance of 14.12 Fg−1 at 0.2 mAcm−2 with capacitance retention of 91.3% after 10,000 cycles, indicating robust cycling stability. In addition, the Co9S8 SC device showed the highest energy (E) and power (P) density of 9.14 Whkg−1 and 0.23 kWkg−1. These results highlight a simple approach of tailoring different phase syntheses of CoxSy structure toward high-performance electrode material for energy storage and conversion.
Buildings in modern society tend to gradually expand in size due to technological development and overcrowding, which increases the risk of fire. Therefore, continuous efforts are being made to ensure the evacuation safety of occupants by installing firefighting facilities and using flame retardant building finishing materials. This study aims to present a fire performance evaluation plan for building finishing materials using simulations and identify risks that arise from not using flame retardant building finishing materials in medical facilities with vulnerable occupants. A control group for fire performance evaluation was selected using polyurethane foam, while two types of cellulose-based building finishing materials with different flame retardants were chosen for analysis. The cellulose-based finishing materials included expanded graphite, magnesium hydroxide, montmorillonite, and ammonium polyphosphate. Fire performance was evaluated using FDS and path detector simulations based on NES 713 and ISO 5660-1. The results of the study showed that there was a difference of three people in the prediction of the number of deaths depending on the scope of analysis, and it was confirmed that the toxic gas detected was different depending on the added flame retardant. Additionally, construction finishing materials with flame retardant performance increased ASET by at least 130 s compared to polyurethane foam, and the evacuation safety exceeded 1, confirming the effectiveness of securing evacuation stability for occupants.