In the last few decades, the concrete industry has been massively expanded with the adoption of various kinds of binding materials. As a substitute to cement and in an effort to relieve ecofriendly difficulties linked with cement creation, the utilization of industrial waste as cementitious material can sharply reduce the amount of trash disposed of in lakes and landfills. With respect to the mechanical properties, durability and thermal behavior, ground-granulated blast-furnace slag (GGBS) delineates a rational way to develop sustainable cement and concrete. Apart from environmental benefits, the replacement of cement by GGBS illustrates an adequate way to mitigate the economic impact. Although many researchers concentrate on utilizing GGBS in concrete production, knowledge is scattered, and additional research is needed to better understand relationships among a wide spectrum of key questions and to more accurately determine these preliminary findings. This work aims to shed some light on the scientific literature focusing on the use and effectiveness of GGBS as an alternative to cement. First and foremost, basic information on GGBS manufacturing and its physical, chemical and hydraulic activity and heat of hydration are thoroughly discussed. In a following step, fresh concrete properties, such as flowability and mechanical strength, are examined. Furthermore, the durability of concrete, such as density, permeability, acid resistance, carbonation depth and dry shrinkage, are also reviewed and interpreted. It can be deduced that the chemical structure of GGBS is parallel to that of cement, as it shows the creditability of being partially integrated and overall suggests an alternative to Ordinary Portland Cement (OPC). On the basis of such adjustments, the mechanical strength of concrete with GGBS has shown an increase, to a certain degree; however, the flowability of concrete has been reduced. In addition, the durability of concrete containing GGBS cement is shown to be superior. The optimum percentage of GGBS is an essential aspect of better performance. Previous studies have suggested different optimum percentages of GGBS varying from 10 to 20%, depending on the source of GGBS, concrete mix design and particle size of GGBS. Finally, the review also presents some basic process improvement tips for future generations to use GGBS in concrete.

Prior studies in the literature show promising results regarding the improvements in strength and durability of concrete upon incorporation of glass fibers into concrete formulations. However, the knowledge regarding glass fiber usage in concrete is scattered. Moreover, this makes it challenging to understand the behavior of glass fiber-reinforced concrete. Therefore, a detailed review is required on glass fiber-reinforced concrete. This paper provides a compressive analysis of glass fiber-reinforced composites. All-important properties of concrete such as flowability, compressive, flexural, tensile strength and modulus of elasticity were presented in this review article. Furthermore, durability aspects such as chloride ion penetration, water absorption, ultrasonic pulse velocity (UPV) and acid resistance were also considered. Finally, the bond strength of the fiber and cement paste was examined via scanning electron microscopy. Results indicate that glass fibers improved concrete’s strength and durability but decreased the concrete’s flowability. Higher glass fiber doses slightly decreased the mechanical performance of concrete due to lack of workability. The typical optimum dose is recommended at 2.0%. However, a higher dose of plasticizer was recommended for a higher dose of glass fiber (beyond 2.0%). The review also identifies research gaps that should be addressed in future studies.

Plastics have become an essential part of our daily lives, and global plastic production has increased dramatically in the past 50 years. This has significantly increased the amount of plastic garbage produced. Researchers have recently been interested in using trash and recyclable plastics in concrete as an ecologically acceptable building material. A large number of publications have been published that describe the behavior of concrete, containing waste and recovered plastic com ponents. However, information is scattered, and no one knows how plastic trash behaves as concrete materials. This research examines the use of plastic waste (PW) as aggregate or fiber in cement mortar and concrete manufacturing. The article reviewed the three most significant features of concrete: fresh properties, mechanical strength, and durability. PW and cement connections were also studied using microstructure analysis (scan electronic microscopy). The results showed that PW, as a fiber, enhanced mechanical performance, but PW, as a coarse aggregate, impaired concrete performance owing to poor bonding. The assessment also identified research needs in order to enhance the performance of PW-based concrete in the future.

The push for sustainability in the construction sector has demanded the use of increasingly renewable resources. These natural fibers are biodegradable and non-toxic, and their mechanical capabilities are superior to those of synthetic fibers in terms of strength and durability. A lot of research recommends coconut fibers as an alternative to synthetic fibers. However, the knowledge is scattered, and no one can easily judge the suitability of coconut fibers in concrete. This paper presents a summary of research progress on coconut fiber (natural fibers) reinforced concrete. The effects of coconut fibers on the properties of concrete are reviewed. Factors affecting the fresh, hardened, and durability properties of concrete reinforced with coconut fiber are discussed. Results indicate that coconut fiber improved the mechanical performance of concrete due to crack prevention, similar to the synthetic fibers but decreased the flowability of concrete. However, coconut fibers improved flexure strength more effectively than compressive strength. Furthermore, improvement in some durability performance was also observed, but less information is available in this regard. Moreover, the optimum dose is an important parameter for high-strength concrete. The majority of researchers indicate that 3.0% coconut fiber is the optimum dose. The overall study demonstrates that coconut fibers have the creditability to be used in concrete instead of synthetic fibers.

Despite being strong under compression, concrete is rather weak when subjected to tensile stress. Concrete has been reinforced with a variety of materials over time in order to resist tensile stresses. Among various types of fibers, polypropylene fiber, which is available in a range of sizes, is being used to strengthen concrete. The fiber also increases the concrete’s toughness, durability, and low permeability. Polypropylene fibers may be utilized in place of conventional reinforcement, according to a number of researchers. The aim of this study is to collect information from already carried out research on polypropylene fibers. Important characteristics of concrete, such as workability, compressive, tensile, and flexural strength, are reviewed. The review also explores cracking behavior and failure modes of polypropylene fiber reinforced concrete. Furthermore, durability aspects, such as water absorption, porosity, dry shrinkage, and microstructure study (scan electronic microscopy), were also reviewed. Results indicate that polypropylene fiber improved the mechanical strength and durability of concrete (particularly tensile capacity) but decreased the flowability of concrete. The optimum dose is important, as a higher dose adversely affects strength and durability due to a lack of flowability. Scanning electronic microscopy results indicate that the polypropylene fibers restrict the propagation of cracks, which improves the strength and durability of concrete. The review also indicates that shrinkage cracks are considerably reduced with the addition of polypropylene fibers. Finally, the review also provides future research guidelines for upcoming generations to further improve the performance of polypropylene fibers that reinforce concrete.

The low tensile capacity of concrete often results in brittle failure without any warning. One way to cope with this issue is to add fibers and essentially improve the tensile strength (TS) behavior of concrete and offset its undesirable brittle failure. In recent investigations, basalt fibers (BFs), as compared to a variety of other kinds of fiber, have attracted the attention of researchers. In that respect, BFs exhibit several benefits, such as excellent elastic properties, great strength, high elastic modulus, higher thermal stability, and decent chemical stability. Although many researchers have reported that BFs can be embedded in concrete to improve the tensile capacity, a more profound understanding of its contribution is still needed. However, the information is scattered and it is difficult for the reader to identify the benefits of BFs. Therefore, a detailed assessment is essential to summarize all relevant information and provide an easy path for the reader. This review (part Ⅰ) summarizes all the relevant information, including flow properties, strength properties, and failure modes. Results reveal that BFs can greatly enhance the strength properties and change the brittle nature of concrete to one of ductility. However, it unfavorably impacts the flowability of concrete. Furthermore, the optimal proportion is shown to be important as a higher dose can adversely affect the strength of concrete, due to a deficiency of flowability. The typical range of the ideal incorporation of BFs varies from 0.5 to 1.5%. Finally, the review also indicates the research gap for future research studies that must be cautiously explored before being used in the real world.