Nowadays, almost 30% of total energy consumption (130 EJ) is consumed for the operation of buildings, mainly by space heating/cooling and ventilation systems, hot water preparation systems, lighting, and other domestic appliances. To improve the energy efficiency of buildings, several countries are promoting the use of renewable energy. The most promising systems include active and passive solar installations. In passive systems, the solar energy is collected, stored, reflected, or distributed by the roof ponds, natural convective loops, and the most popular direct gain walls and thermal storage walls (known as Trombe walls). This paper reviews the experimental and numerical studies devoted to the different solutions of Trombe walls, including solar chimneys integrated on the vertical walls, classic Trombe walls, Trombe walls with incorporated phase change materials, and photovoltaic Trombe walls. The actual state of the art is presented in the context of reducing energy consumption and enhancing thermal comfort. Most of the analyzed studies showed that the application of thermal storage walls allowed achieving these goals, led to lower emissions of greenhouse gases, and improved living standards. Nevertheless, there is a need for more detailed feasibility studies, including cost and environmental indicators.
Power-to-Heat and Seasonal Thermal Energy Storage are emerging technologies that facilitate the integration of variable renewable energy sources into building and district energy systems. This review synthesizes recent advancements in technologies, integration strategies, and case studies, with a particular focus on nearly zero-energy buildings and nearly zero-energy districts. A structured literature survey, prioritizing sources from 2020 to 2025, was conducted to map available options. The analysis includes Power-to-Heat systems, primarily electric boilers and heat pumps, as well as various seasonal thermal energy storage configurations, including Aquifer Thermal Energy Storage, Borehole Thermal Energy Storage, Pit Thermal Energy Storage, Tank Thermal Energy Storage, and Packed Bed Thermal Energy Storage. The findings indicate that coupling renewable energy with Power-to-Heat and seasonal thermal energy storage can significantly enhance the flexibility of buildings and district systems, reducing the curtailment of renewable sources by utilizing surplus electricity from renewable generation, particularly during periods of low demand, and lowering the environmental impact of buildings and district heating networks.
Numerous numerical and experimental studies have been conducted regarding the Concentrated Photovoltaic Thermal (CPVT) system because of its significant potential for efficient conversion of solar energy. The overall efficiency of the CPVT system is strongly dependent on the device, which extracts excess heat from photovoltaic cells. The most efficient cooling technology involves active cooling, which means that heat is collected from the PV cell via the forced flow of heat transfer fluid. This research paper provides an extensive discussion on devices dedicated to active-cooling CPVT systems, taking into account the latest solutions. First, a short introduction regarding CPVT systems and their main components is presented. The second part of this study presents state-of-the-art solutions in the field of heat extraction devices for the active cooling of photovoltaic cells. The available solutions are classified into two main groups depending on the scale of internal channels: macro- and micro-. Each geometry of the heat receiver is juxtaposed with the corresponding concentrating element, photovoltaic cell, concentration ratio, heat transfer fluid, and operating parameters of the specified system. In addition, this paper discusses the advantages and disadvantages of various devices for heat extraction and provides a comparative study of these devices. Finally, a set of recommendations for CPVT cooling devices is provided.
Passive solutions in buildings have recently been rediscovered because they allow the rational use of solar radiation, which promotes energy savings. Thermal energy gained from the sun may be stored in the form of sensible heat in accumulative solid materials in a building envelope. This paper proposes an innovative solar air heater that captures and accumulates solar energy during the day and releases it during the night. The analyzed system is based on inexpensive ceramic modules, which can be used to construct thermal storage walls or solar chimneys in modern buildings. Both configurations have been tested experimentally and by a numerical model in ArCADia BIM software. Experiments have been carried out in laboratory conditions using a specially developed prototype. Among other parameters, power transferred from the solar air heater to the ventilation air in different conditions has been analyzed. When airflow was set to 150 m3/h, the maximum power observed under stable working conditions was approx. 355.0 W when the developed solar air heater operated as the solar chimney, and approx. 165.0 W when it operated as the solar thermal wall. When airflow was set to 200 m3/h, the maximum power was approx. 385.0 W. Experimental results have been used to calculate the efficiency of the solar air heater in real conditions. The total efficiency in the case of the solar chimney was estimated as 0.25, while in the case of the thermal wall it was estimated as 0.78, which resulted in an annual reduction in energy usage at a level of 190.7 kWh and 556.1 kWh, respectively (4.8 and 14.0%). In practice, these values can be significantly higher due to the possibility of increasing the length and shape of the accumulation heat exchanger.
The typical operating range of domestic heating devices includes only heat generation. However, the availability of combined heat and power generation in microscale devices is currently becoming a more and more interesting option. This paper shows the experimental and numerical analysis of the possibility of developing a micro-cogeneration system equipped with a wood-fired heating stove and a prototype of the thermoelectric generator equipped with low-price thermoelectric modules. In the first step, mathematical modeling made it possible to analyze different configurations of the hot side of the thermoelectric generator (computational fluid dynamics was used). Next, experiments have been conducted on the prototypical test rig. The maximum power obtained during the discussed combustion process was 15.9 We when the flue gas temperature was approximately 623 K. Assuming a case, when such value of generated power occurred during the whole main phase, the energy generated would be at a level of approximately 33.1 Whe, while the heat transferred to the water would be approximately 1 078.0 Whth. In addition to the technical aspects, the economic premises of the proposed solution were analyzed. As was shown, an installation of TEG to the existing stove is economically not viable: the Simply Payback Time will be approximately 28.9–66.1 years depending on the analyzed scenario. On the other hand, the SPBT would be significantly shorter, when the installation of the stove with an integrated thermoelectric generator was considered (approximately 5.4 years). However, it should be noted that the introduction of the power generating system to a heat source can provide fully or partially network-independent operation of the hot water and heating systems.