Depressed cladding waveguides are fabricated in Pr:LiYF4 (YLF) crystal by femtosecond laser inscription following a helical scheme. With the optimized parameters, the propagation loss of the waveguide is around 0.12 dB/cm for multimode guiding. Under optical pumping with InGaN laser diodes at 444 nm, efficient waveguide lasers in the orange around 604 nm (-polarized) are achieved with minimum lasing threshold of 119.8 mW, maximum slope efficiency of 16.6%, and maximum output power of 120.6 mW. Benefiting from their optimized performances, the waveguides produced in this work are promising for applications as compact orange laser sources.
Depressed-cladding waveguides are produced in Yb,Na:CaF2 laser crystal by applying ultrafast laser inscription. Under pumping at 946 nm, continuous-wave (CW) and Q-switched laser oscillations with low thresholds are realized in these waveguide structures. With the variation of pumping power, switchable single- and dual-wavelength laser emissions peaking at 1013.9 nm and 1027.9 nm are generated. The maximum output power achieved for CW lasing is about 170 mW, corresponding to an optical-to-optical conversion efficiency as high as 45.3%. A pulse energy of 0.13 μJ is obtained for the waveguide laser operating in the pulsed regime.
We numerically investigate second harmonic generation (SHG) from a monolayer of 2D‐material placed on photonic moiré superlattice fabricated by dielectric materials. The greatly enhanced local field at the resonance modes of moiré superlattice can dramatically boost the SHG response in 2D materials. Considering a typical 2D‐material MoS 2 monolayer placed on a photonic moiré superlattice of a twist angle 9.43°, the maximum SHG conversion efficiency reaches up to 10 −1 at a relatively low intensity of fundamental light 1 kW/cm 2 , which is around 14 orders of magnitude larger than that from the monolayer placed on a flat dielectric slab without moiré superlattices. The SHG conversion efficiency from the monolayer can be further enhanced with the decrease of the twist angles of moiré superlattice due to the even more confinement of local field. The flat bands in the moiré superlattices formed by the small twist angles can particularly ensure the efficiency even under wide‐angle illuminations. The results indicate that photonic moiré superlattice which can tightly confine light is a promising platform for efficient nonlinear optics.
Optical channel waveguides with depressed cladding configurations have been produced in laser crystals by using ultrafast laser inscription. Waveguide properties are investigated in terms of guiding behaviors and localized laser-induced lattice damages. Under an optical pump of 808 nm light, continuous-wave waveguide lasing at 1.06 μm is achieved, with a single-mode operation and a minimum lasing threshold of 98.8 mW. Furthermore, the visible emissions of with short wavelengths ranging from 415 nm to 550 nm and long wavelengths from 550 nm to 625 nm are observed upon 808 nm laser excitation via the up-converted process. The intensity ratios of two wavelength ranges are proved to be tunable through changing the pumping polarizations.
In this work, we report on the fabrication of deeply embedded optical-lattice-like structures in a Ti:Sapphire crystal by applying femtosecond laser inscription (FLI) to implement two-dimensional (2D) one-to-two and three-dimensional (3D) one-to-four beam splitting. Such a family of photonic microstructures is characterized at near-infrared both experimentally and numerically, showing excellent capability of simultaneous light confinement and beam tailoring at two orthogonal polarizations. The confocal micro-Raman image of the obtained structure reveals that the optical properties of the substrate have been well-preserved in the waveguide’s active volumes. Our results pave a way to construct complex integrated waveguide splitters in Ti:Sapphire crystals by using FLI for photonic applications.
Graphene structures play a fundamental role in the exploration of edge states, topological insulators, and electronic transport applications. In this paper, we propose a graphenelike moiré photonic lattice formed by superimposing two identical triangle sublattices with an antiphase and a specific twist angle and study the edge and corner states of such a lattice in linear and nonlinear regimes. The graphenelike moiré lattice is truncated into three types of edges in analogy with those of graphene. Through band-structure calculations, we find that only the zigzag edge supports edge states, while the other two edges do not exhibit such states. A truncated graphenelike moiré photonic lattice with zigzag edges is constructed by utilizing the laser-writing technique. We observe the complex edge states and corner states in the linear regime at the zigzag edge. Furthermore, by introducing nonlinearity, the optical localization occurs at the edges and corners. Our research provides a route for exploring topological edge states and nonlinear edge solitons in coherent moiré photonic lattices and brings possibilities for subsequent technological development in electronic or optoelectronic devices.