In this Letter, a novel, to the best of our knowledge, robust interferometry based on orbital angular momentum (OAM) is proposed for an in-plane displacement measurement. A vortex beam (VB) is incident onto a diffraction grating, and the ±1st order diffraction beams with conjugate OAM interfere with each other. By demodulating the petal-like interferogram, the in-plane displacement of the grating can be determined. Theoretically, a 1° rotation of the interferogram corresponds to a displacement of 2.31 nm. Experimental results revealed that the maximum measurement error was less than 3.35%. The proposed measurement system combines the advantages of both OAM interferometry and grating interferometry. It adopts the grating pitch instead of the wavelength as the measurement reference, providing robust immunity to environmental disturbances while maintaining high resolution simultaneously.
In this study, a multiple-dimensional displacement measurement technology is demonstrated by using self-mixing interferometry (SMI) cooperating with a frequency division multiplexing (FDM) technique. The proposed SMI configuration with a single laser generates three modulated light beams with different carrier frequencies. Each beam is incident on a planar grating with its own auto-collimation diffraction angle. The diffracted beams return to the laser cavity and then self-mixing interference occurs. An algorithm based on FDM is developed for multiple-dimensional displacement reconstruction from a single SMI signal. Experiments are conducted to verify the proposed approach. This paper shows an attractive sensing system for multiple-dimensional displacement featuring compact configuration, high resolution and better immunity to environmental disturbances.
In this work, we present a Littman-configured interferometer based on orbital angular momentum (OAM) beams for nano-displacement measurement. The petal-like interferogram is generated by the interference of two conjugate OAM beams: a reference beam and a measured beam, which is diffracted from a scale grating. The one-dimensional displacement of the grating, whether in-plane or out-of-plane, can be precisely determined by demodulating the rotation angle of the interferogram using a circular cross-correlation algorithm. Theoretically, a 1 o rotation of the interferogram corresponds to an in-plane displacement of 2.313 nm or an out-of-plane displacement of 1.067 nm. Experimental results indicate that in-plane displacement measurements exhibit a maximum error of 1.299 nm for a step displacement of 300 nm, whereas out-of-plane displacement measurements demonstrate a maximum error of 1.898 nm for a step displacement of 200 nm. The displacement resolutions are both better than 2 nm. In the in-plane X-direction, integrating a scale grating with the OAM interferometer within a Littman-configured structure effectively transfers the measurement standard from the laser wavelength to the grating pitch. In contrast, the out-of-plane displacement is influenced by both the grating pitch and the wavelength. This approach enhances environmental robustness while maintaining high displacement resolution.
29 February 2024 in IEEE Photonics Technology Letters
A novel technique is proposed for refining the spectral regulation of chirped fiber Bragg gratings (CFBGs) during the fabrication process, utilizing an ultraviolet (UV) laser with a chirped phase mask. By incorporating an additional phase into the Hamming window function, a new laser control function is generated. This supplementary phase directly enhances the waveform shift parameter and introduces an extra degree of freedom. Consequently, it becomes easier to accurately control the direct-current component in the photo-induced refractive index change during grating writing, leading to a more precise distribution of the refractive index gradient within the grating. The effectiveness of this method was validated through experiments conducted over a wide bandwidth of 20 nm for the CFBGs. The number of peaks from 1 to 4 were investigated, achieving a contrast of 40 dB. Extensive testing and verification were performed on the peak position shifts within the modulation bandwidth of numerous CFBGs. The results demonstrated that this new approach enables the fabrication of CFBGs with arbitrary waveform spectra. This technique significantly improves the optical performance and application value of CFBGs, offering a means to fabricate high-performance CFBGs using the UV mask method.
15 September 2021 in IEEE Photonics Technology Letters
A high temperature real-time accurate monitoring system based on photoelectric oscillation had been proposed and demonstrated. We use the narrow bandwidth characteristics of phase-shifting fiber Bragg grating (PS-FBG) to generate stable photoelectric oscillation signals. After the PS-FBG is ceramic packaged to adapt to and apply to 500 °C high temperature, the wavelength shift caused by temperature change is precisely responded by narrow linewidth PS-FBG, so the change of photoelectric oscillation signal can be monitored in real time with high precision. The experimental results show that the sensitivity is -1.24 GHz/°C and the linearity is -0.99953. The system has a resolution of 0.0083 °C. The test system has excellent potential application value in precise control of high temperature environment such as metal smelting, crystal growth, chemistry and pharmaceutical engineering.