Single-photon avalanche diodes (SPADs) are very attractive devices in optical detector applications where both CMOS integration and low light detection are critical. An important SPAD performance parameter is the photon detection probability (PDP) which has to be carefully characterized for the sensor design. In this article, we present a comprehensive modeling and experimental characterization of the PDP to obtain its optical and electrical dependency on different parameters including the wavelength and light incidence angle as well as the biasing condition. By calculating the optical absorption and the avalanche triggering probabilities within the silicon, the PDP of an n + /p-well CMOS-implemented SPAD is accurately modeled. It is shown that due to the formation of a standing wave in different layers above the silicon, which significantly affects the optical transmission and the PDP spectrum, the application of the presented approach is necessary especially when an anti-reflection coating layer is not available. The obtained result shows an excellent agreement to our measurements and, therefore, the model can be reliably used for accurate design and optimization of SPAD-based detectors and to avoid very time-consuming experimental investigations, e. g. for obtaining the detector performance for deviations in the light incidence angle.
This paper presents a CMOS-integrated dot avalanche photodiode (dot-APD) that features a small central n+/p-well hemispherical cathode/p-well structure circularly surrounded by an anode ring. The dot-APD enables wide hemispherical depletion, charge collection from a large volume, and a small multiplication region. These features result in a large light-sensitive area, high responsivity and bandwidth, and exceptionally low junction capacitance. The active area can be further expanded using a multi-dot structure, which is an array of several cathode/p-well dots with a shared anode. Experimental results show that a 5 × 5 multi-dot APD with an active area of 70 μm × 70 μm achieves a bandwidth of 1.8 GHz, a responsivity of 9.7 A/W, and a capacitance of 27 fF. The structure of the multi-dot APD allows for the design of APDs in various sizes that offer high bandwidth and responsivity as an optical detector for various applications while still maintaining a small capacitance.
This work presents a simulation and experimental study of the photon detection probability (PDP) enhancement in CMOS single-photon avalanche diodes (SPADs) using an anti-reflection coating (ARC) above the sensitive area. It is shown how the ARC layer can improve the PDP, not only by improving the optical transmission, but also by eliminating the penetration of the standing wave into a shallow region close to the silicon surface, where the multiplication region of the SPAD is formed. Furthermore, the appropriate ARC layer thickness corresponding to maximum PDP enhancement at different wavelengths over the visible spectrum is extracted to provide insight regarding the ARC selection if different ARC thicknesses are available within the CMOS process.
Detecting weak optical signals is critical to a variety of opto-electronic applications, including time-of-flight sensors, quantum cryptography, optical wireless communication, and optical tomography in medical diagnostics. This makes the single-photon avalanche diode (SPAD) an attractive candidate as it has a sensitivity level of detecting single photons.1–4 The SPAD operation can be thought as a simple diode with a reverse bias above its breakdown voltage and therefore, an absorbed photon generates an electron–hole pair, which might gain enough energy to create a self-sustaining avalanche due to a strong electric field formed in a multiplication zone. The self-sustaining avalanche has to be stopped by reducing the voltage to below breakdown by a quenching circuit (active or passive) and then needs to be recovered (reset) for the next detection.
1 August 2022 in IEEE Photonics Technology Letters
This letter presents a new Si CMOS linear-mode avalanche photodiode (APD) based on an electric field distribution formed by field-line crowding. In this structure, a spherical avalanching electric field is enforced by field-line crowding due to the curvature of the half-sphere cathode (n-well). The electric field extends radially and, therefore, the entire low-doped epitaxial layer serves as charge collection zone. This APD can provide high responsivity and bandwidth due to its thick absorption zone and drift-based carrier transport. Measurements using a 675 nm laser source at 200 nW optical power show a maximum bandwidth of 1.6 GHz while the responsivity is 32 A/W. In addition, a maximum responsivity of 3.05 $\times \,\,10^{3}$ A/W at 5 nW optical power is achieved. Due to the high avalanche gain, large bandwidth, and CMOS compatibility without any process modification, this APD is a promising optical detector for many applications.
This paper presents a CMOS-integrated linear-mode avalanche photodiode based on electric field-line crowding (EFLC-APD) to form an effective multiplication zone and a wide absorption zone. The EFLC-APD possesses a hemispherical avalanching electric field at the n-well/p- epi junction formed due to the curvature of the half-sphere cathode. A lower electric field extends radially across the entire volume of the EFLC-APD towards the substrate and towards the surface anode. Because of such a distribution of the electric field, electrons photogenerated within the whole volume drift towards the cathode. Therefore, the EFLC-APD provides a large sensitive-area to total-area ratio while offering high responsivity and bandwidth for red and near-infrared light due to its thick absorption zone and drift-based carrier transport. It is shown that the electric field distribution can be modified by the design parameters such as cathode radius and diode size in addition to doping profiles. The EFLC-APD achieves a responsivity-bandwidth (R-BW) product of 49.5 $\frac{\mathrm{A}}{\mathrm{W}}\cdot$ GHz, corresponding to the responsivity and bandwidth of 33 A/W and 1.5 GHz, respectively, at the wavelength of 850 nm. In addition, a maximum responsivity of 3.05 $\times 10^{\mathrm{3}}$ A/W at 2 nW optical power is achieved for the red and near-infrared spectral range. Noise characterization resulted in an excess noise factor F=6 measured at an avalanche gain of 56.7. Due to the high sensitive-area to total-area ratio, high responsivity, large bandwidth, and CMOS compatibility, this APD is a promising optical detector for many applications.