Bruxism is a repetitive activity of the masticatory muscles, which determine teeth grinding or clenching, associated with rigidity, bracing, or thrusting of the mandibula. The aim of this study was to determine the prevalence of possible bruxism in 328 students attending the Faculty of Dental Medicine, University of Medicine and Pharmacy of Craiova, and its associations with stress and other manifestations of the temporo-mandibular disorder. This was a questionnaire-based study to collect information on self-evaluation of bruxism presence, frequency of specific episodes, stress, anxiety, and other manifestations of temporo-mandibular disorder. Self-evaluated bruxism was identified in 39.33% from the entire study group, allowing us to define two subgroups for further analysis. Sleep bruxism was present in 16.28% of participants; awake bruxism was present in 68.99%, while 14.73% of participants presented a combined form. The main manifestation of bruxism was reported as teeth grinding. Fatigue was identified as a common clinical sign of bruxism and temporo-mandibular disorder. Group distribution analysis (Chi-Square) indicated significant associations between bruxism and stress, panic, restlessness, or increased stress during the COVID-19 pandemic (p < 0.05). Bruxism, and especially awake bruxism, has increased in prevalence among young students, and it has been associated with increased levels of stress.

The implementation of CAD-CAM systems in dentistry has significantly influenced the evolution of dental implantology and implant-supported prosthetics within the past three decades. Implant-supported prostheses are comfortable and aesthetic. The prosthetic abutment has also faced a rapid design evolution, from the individualization of standard stock abutments offered by various manufacturers to a modern customization process using CAD-CAM technology. This paper presents a comparative study between 20 dental custom CAD-CAM implant abutments and 20 dental implant stock abutments, based on a set of measurements performed on the digital casts obtained from 24 cases of prosthetic rehabilitation on implants. The statistical analysis (Mann–Whitney U test) revealed significant differences between these two types of abutments: the incisal margin line diameter dimensions for custom abutments were significantly improved compared to standard abutments at the cervical level (U = 343.00, z = 3.868, p < 0.0005) and the incisal/occlusal level (U = 352.00, z = 4.112, p < 0.0005), while the inclination angle of the custom abutments relative to the 0-axis was significantly smaller than that of standard abutments (U = 115.50, z = −2.286, p = 0.022). The use of custom abutments leads to an increase in the final size of the abutment, an improvement in the retention of the prosthetic work, and reduces the angulation of the abutment in relation to the implant axis, thus decreasing the risk of unscrewing or fracturing the dental screw.

This study evaluated the occlusal relationships in students with bruxism, using the T-Scan III system, and their correlation with the activity of the masticatory muscles assessed through surface electromyography (sEMG). The study group was divided into two subgroups (based on self-reporting): 20 participants with possible bruxism and 20 participants without possible bruxism; all participants underwent the following evaluations: sEMG recordings using the dia-BRUXO device for masticatory muscles assessment, as well as static and dynamic occlusion using the T-SCAN III system. The analysis of the maximum intercuspidal (MI) position revealed a positive moderate association between the values of the occlusal forces in MI distributed along the two hemiarches, and the number of grinding events during daytime, which was statistically significant (p < 0.05). The analysis of protrusion movements reflected statistically significant differences between the non-working interferences and sEMG parameters specific to bruxism (p < 0.05). The analysis of laterotrusion movements indicated that participants with anterolateral guidance presented higher values of awake bruxism indexes and higher values of clenching events during nighttime. For all three mandibular movements, their duration was higher for the study group compared to the control group. Therefore, this study confirmed the utility of sEMG recordings in the bruxism diagnosis process, as well as the association between dental occlusion and bruxism.

According to the International Bruxism Consensus, bruxism refers to the activity of the masticatory muscles reflecting contraction disorders, regardless of whether it is during sleep (SB) or an awake (AB) state. The objective of the present study was to evaluate the activity of the masseter muscle by surface electromyographic (sEMG) recordings. This study was performed on 20 participants with self-reported “possible bruxism” (study group) and 20 participants with no self-reported bruxism (control group); all participants underwent an evaluation of the masseter muscle activity using the dia-BRUXO device, which provides numerical parameters regarding sEMG (the total duration and the type of bruxism specific events, the effort made by the masticatory muscles during the recording period, and the personal bruxism index of each participant). Participants from the study group presented more clenching events during AB, three times more frequent than the control group (p = 0.002, Mann–Whitney U test); for SB, the frequency of clenching and grinding events was comparable within the study group, being more frequent than for the control group; the mean value of the effort index was higher for AB (1.177%) than SB (0.470%) and the same for the duration index, with a mean value of 2.788% for AB and 1.054% for SB. All participants from the control group presented reduced values for all acquired parameters. Overall, the personal bruxism index in AB was approximately four times higher for the study group (2.251%) compared to the control group (0.585%) (p < 0.005, Mann–Whitney U test). Similar values were obtained for SB. All participants with “possible bruxism” from the study group presented a higher activity of the masseter muscle, which is specific for bruxism, thus being defined as “definite bruxism”.

Introduction: Dental occlusion refers to the static and dynamic relationships that are established between the teeth of the two arches and is an important factor in the homeostasis of the dento-maxillary system. The objective of the present study was to compare two digital occlusal analysis systems: the T-Scan III system and the Medit I600 intraoral scanner. Materials and Methods: The study was carried out on 20 students from the Faculty of Dental Medicine Craiova, whose dental occlusion was assessed with the T-Scan III system and with the Medit I600 intraoral scanner. Dental occlusion was assessed in the maximum intercuspation position, the edge-to-edge protrusion position, and the edge-to-edge position in right and left laterotrusion. The images of the 2D occlusal contact areas obtained by both methods were converted to .jpeg format and then transferred to Adobe Photoshop CS6 2021 (Adobe Systems, San Jose, CA, USA) for comparison. The recorded data were statistically processed. Results: Analyzing the data provided by the two digital occlusal analysis systems, it was found that the T-Scan III system provided data related to the amplitude of the occlusal forces, the surface on which they were distributed (the contact surface), the dynamics of the occlusal contacts, and the proportion in which they were distributed at the level of the two hemiarches, and the Medit I600 intraoral scanner performed an evaluation of the occlusal interface of the two arches, highlighting the extent of the contact areas with the degree of overlapping of the occlusal components. Although both methods of occlusal analysis recorded the highest values for the maximum intercuspation position, the results could not be compared. Conclusions: The two digital systems provide different data in occlusal analysis. As the T-Scan III system is considered the gold standard for occlusal analysis, more studies are needed to understand the data provided by the Medit I600 intraoral scanner and their significance.

Background/Objectives: Excessive occlusal forces manifest in bruxism and have consequences on teeth and jaws. The aim of this study was to determine the association of bruxism with clinical and radiological signs of excessive occlusal forces, such as tooth wear, fatigue dental fissures and fractures, abfraction, masseter muscle hypertrophy, and bone apposition at the mandibular angle. Methods: This cross-sectional clinical study included 181 patients presented for treatment in a general dentistry clinic. For each patient, data were extracted from the dental chart, as follows: demographic data (sex, age, and smoking), clinical data (number of teeth present, Eichner edentulous score, TWI wear score, number of fractured teeth, number of teeth with abfraction, presence of masseter hypertrophy, presence of hypersensitivity), and radiological data (bone apposition at the mandibular angle). The patients were divided into two groups according to the presence or absence of bruxism. A binomial logistic regression model was run to determine the association between bruxism and clinical and radiological signs of excessive occlusal forces. The data were statistically processed in SPSS. Results: In total, 99 women and 82 men with mean age 44.87 ± 12.67 were included in the study. Compared to the group without bruxism, the group of patients with bruxism (39.78%) showed statistically significant higher tooth wear index (TWI) (p < 0.0005), a higher number of fractured teeth (p = 0.037), a higher number of teeth with abfraction lesions (p = 0.001), and a significantly higher bone apposition score (p < 0.0005). The binomial logistic regression model showed a high prediction bruxism score for masseter muscle hypertrophy (15 times, p < 0.0005), for tooth wear index (almost 7 times, p = 0.010), and for bone apposition score (almost 3 times, p = 0.044). Conclusions: Patients with bruxism showed masseter muscle hypertrophy, higher attrition-type tooth wear index, and more teeth with fatigue fractures and abfractions than those without bruxism. Bruxism clinical signs were positively correlated with a higher bone apposition score.