High power single mode wafer-fused 1300-nm VCSELs with a gain region based on InGaAs/InAlGaAs short period superlattice are fabricated. An InP-based optical cavity and two AlGaAs/GaAs distributed Bragg reflector heterostructures were grown by molecular beam epitaõy. The current and optical confinement is provided by a lateral-structured buried tunnel junction with etching depth of $\sim 25$ nm. It is shown that optimal diameter of the buried tunnel junction for high-power single mode emission is $\sim 5$ - $6~\mu \text{m}$ . The VCSEL demonstrates more than 6 mW single mode continuous-wave power and a threshold current less than 1.5 mA at 20 °C. The output optical power exceeds 1 mW at 85 °C. A -3dB modulation bandwidth up to 8 GHz and 6 GHz is obtained at 20 °C and 85 °C, respectively. The gain coefficient of $\sim 650$ cm−1 and the transparency current density of $\sim 630$ A/cm2 are estimated at zero gain-to-cavity detuning (\sim 60 °C). The ultimate low internal optical losses about 0.08 % per round-trip (distributed losses ~3.2 cm−1) at 20 °C and 0.13 % per round-trip (distributed losses ~5.5 cm−1) at 100 °C were obtained.
1 February 2023 in IEEE Photonics Technology Letters
High power single-mode wafer fused 1550 nm VCSELs with an active region based on InGaAs quantum wells are fabricated. An InP-based optical cavity and two AlGaAs/GaAs distributed Bragg reflector heterostructures were grown by molecular-beam epita oy. The current and optical confinements are provided by a lateral-structured buried tunnel junction with $\sim ~6~\mu \text{m}$ diameter and etching depth of ~ 20 nm. The VCSELs demonstrate ~ 3.4 mW single-mode continuous-wave output optical power and a threshold current about 2 mA at 20°C. The output optical power exceeds 1 mW at 70°C. A −3dB modulation bandwidth > 13 GHz is obtained at 20°C. Non-return-to-zero data transmission under back-to-back condition of ~ 37 Gbps is shown.
A design of a tunnel junction (TJ) based on n++-InGaAs/p++-InGaAs/p++-InAlGaAs layers for vertical-cavity surface-emission lasers (VCSELs) for the 1.55-μm spectral range fabricated by wafer fusion of an InAlGaAsP/InP optical cavity and wafers with AlGaAs/GaAs distributed Bragg reflectors has been suggested and tested. The presence of the oxidation-resistant InGaAs layers makes it possible to employ the molecular-beam epitaxy in all stages of the fabrication technology of VCSELs, including the overgrowth of the surface profile in the TJ layer. Owing to the Burstein–Moss effect and to the thickness minimization of the p++-InGaAs layer, it was possible to avoid a buildup of the internal optical loss. As a result, the characteristics of the thus fabricated devices are comparable with those of VCSELs having an n++-/p++-InAlGaAs TJ and a similar level of the mirror losses.
Subject of study. A high-speed fiber-optic transmitter for the spectral range of 1.55 µm, based on a vertical-cavity surface-emitting laser (VCSEL) fabricated using wafer fusion technology was investigated. Aim of study. A comprehensive study of the parameters of the 1.55-µm range optical transmitter based on a VCSEL at room temperature is presented. Method. The heterostructure of the VCSEL was fabricated using molecular beam epitaxy and wafer fusion technology. The transmitter parameters were investigated with current modulation by a large signal in the non-return-to-zero (NRZ) format. Main results. At 20°C, the transmitter demonstrated maximum output optical power, exceeding 1 mW at the fiber output in single-mode operation. The maximum data rate over a short communication line based on an SMF-28 fiber with current amplitude modulation in the NRZ format reached 30 Gbits/s, limited by the modulation bandwidth reaching a value of approximately 12 GHz (at −3dB level). With an increase in the length of the fiber-optic communication line, the chromatic dispersion of the fiber and the chirp effect of the laser increase inter-symbol interference, which ultimately limits the speed and range of optical data transmission. Practical significance. The investigated fiber-optic transmitters are promising for both digital and analog transmission of high-frequency optical signals over fiber-optic communication lines.
21 November 2024 in IEEE Journal of Selected Topics in Quantum Electronics
We report on microlasers based on high-quality micropillars with whispering-gallery modes lasing. The use of low-absorbing Al0.2Ga0.8As/Al0.9Ga0.1As distributed Bragg reflectors and smooth pillar sidewalls enables whispering-gallery modes lasing by excitation and collection of emission in the pillar axis direction. Simultaneous whispering gallery modes lasing (comb-like structure) is observed in the wavelength range of 930–970 nm for 3–7 μm pillar diameters. Increasing the temperature to 130 K leads to single-mode lasing for 5 μm pillars with a cold cavity quality-factor of about 8000 and an estimated threshold excitation power of 240 μW. Lasing in the thermoelectrical cooling range (up to 170 K) has been demonstrated.