The United Nations (UN) 2030 agenda on sustainable development goals (SDGs) encourages us to implement sustainable infrastructure and services for confronting challenges such as large energy consumption, solid waste generation, depletion of water resources and emission of greenhouse gases in the construction industry. Therefore, to overcome challenges and establishing sustainable construction, there is a requirement to integrate information technology with innovative manufacturing processes and materials science. Moreover, the wide implementation of three-dimensional printing (3DP) technology in constructing monuments, artistic objects, and residential buildings has gained attention. The integration of the Internet of Things (IoT), cloud manufacturing (CM), and 3DP allows us to digitalize the construction for providing reliable and digitalized features to the users. In this review article, we discuss the opportunities and challenges of implementing the IoT, CM, and 3D printing (3DP) technologies in building constructions for achieving sustainability. The recent convergence research of cloud development and 3D printing (3DP) are being explored in the article by categorizing them into multiple sections including 3D printing resource access technology, 3D printing cloud platform (3D–PCP) service architectures, 3D printing service optimized configuration technology, 3D printing service evaluation technology, and 3D service control and monitoring technology. This paper also examines and analyzes the limitations of existing research and, moreover, the article provides key recommendations such as automation with robotics, predictive analytics in 3DP, eco-friendly 3DP, and 5G technology-based IoT-based CM for future enhancements.

Indagation in the sphere of nanoparticle utilisation has provided commendatory upshots in discrete areas of application varying from medicinal use to environmental degradation alleviation. This study incorporates alumina nanoparticles as additives to diesel and biodiesel blends. The prime objective of the present study was the scrutinisation of the denouement of Al₂O₃ nanoparticle incorporation in diesel–biodiesel blends on a diesel engine’s performance and emission characteristics. Test fuel samples were prepared by blending different proportions of biodiesel and dispersing two concentrations of alumina nanoparticles (25 and 50 ppm) in the diesel. Dispersion was made without the use of a nanoparticle stabiliser to meet real-world feasibility. High-speed shearing was employed to blend the biodiesel and diesel, while nanoparticles were dispersed in the blends by ultrasonication. The blends so devised were tested using a single-cylinder diesel engine at fixed RPM and applied load for three compression ratios. Upshots of brake-specific fuel consumption (BSFC) and brake thermal efficiency (BTE) for fuel samples were measured with LabView-based software, whereas CO emissions and unburnt hydrocarbon (UBHC) emissions were computed using an external gas analyser attached to the exhaust vent of the engine. Investigation revealed that the inclusion of Al₂O₃ nanoparticles culminates in the amelioration of engine performance along with the alleviation of deleterious exhaust from engine. Furthermore, the incorporation of alumina nanoparticles assisted in the amelioration of dwindled performance attributed to biodiesel blending. More favourable results of nanoparticle inclusion were obtained at higher compression ratios compared to lower ones. Reckoning evinced that the Al₂O₃ nanoparticle is a lucrative introduction for fuels to boost the performance and dwindle the deleterious exhaust of diesel engines.

Dengue virus (DENV) is an arboviral disease affecting more than 400 million people annually. Only a single vaccine formulation is available commercially and many others are still under clinical trials. Despite all the efforts in vaccine designing, the improvement in vaccine formulation against DENV is very much needed. In this study, we used a roboust immunoinformatics approach, targeting all the four serotypes of DENV to design a multi-epitope vaccine. A total of 13501 MHC II binding CD4+ epitope peptides were predicted from polyprotein sequences of four dengue virus serotypes. Among them, ten conserved epitope peptides that were interferon-inducing were selected and found to be conserved among all the four dengue serotypes. The vaccine was formulated using antigenic, non-toxic and conserved multi epitopes discovered in the in-silico study. Further, the molecular docking and molecular dynamics predicted stable interactions between predicted vaccine and immune receptor, TLR-5. Finally, one of the mapped epitope peptides was synthesized for the validation of antigenicity and antibody production ability where the in-vivo tests on rabbit model was conducted. Our in-vivo analysis clearly indicate that the imunogen designed in this study could stimulate the production of antibodies which further suggest that the vaccine designed possesses good immunogenicity.

Graphene has been widely and extensively used in mass sensing applications. The present study focused on exploring the use of single-layer graphene (SLG) and double-layer graphene (DLG) as sensing devices. The dynamic analysis of SLG and DLG with different boundary conditions (BDs) and length was executed using the atomistic finite element method (AFEM). SLG and DLG sheets were modelled and considered as a space–frame structure similar to a 3D beam. Spring elements (Combin14) were used to identify the interlayer interactions between two graphene layers in the DLG sheet due to the van der Waals forces. Simulations were carried out to visualize the behavior of the SLG and DLG subjected to different BDs and when used as mass sensing devices. The variation in frequency was noted by changing the length and applied mass of the SLGs and DLGs. The quantity of the frequency was found to be highest in the armchair SLG (6, 6) for a 50 nm sheet length and lowest in the chiral SLG (16, 4) for a 20 nm sheet length in the bridged condition. When the mass was 0.1 Zg, the frequency for the zigzag SLG (20, 0) was higher in both cases. The results show that the length of the sheet and the various mass values have a significant impact on the dynamic properties. The present research will contribute to the ultra-high frequency nano-resonance applications.

Technology has enhanced the scope and span of the teaching and learning process but somehow it could not enhance the self-motivation and engagement among the students to the same scale. The lack of self-motivation and intermittent engagement is one of the prime challenges faced by educators today. Perplexing tasks for the faculty are to embroil students during the lecture. This work paves new ways to scale up the enticement using artificial intelligence and machine learning. The intelligent framework proposed here is built on yet another novel methodology used globally for user engagement and is termed gamification. The primary objective of the present research work is to negate the issue of disengagement by designing and implementing a gamified framework on 120 students from higher education that will include student engagement, enticement, and motivation. Generally, mechanisms are designed for specific courses, whereas the gamified system proposed is an open-ended method irrespective of course and the program being studied, and this framework has endeavored on multiple courses. To enhance the utility of the gamified framework, ANFIS model is utilized for smart decision-making concerning rewards distribution that is directly proportional to the number of coins gained by the students. As an outcome, better participation of a group of students under the proposed intelligent gamified system is reported as compared to the control group thus endorsing the success of the model.