Saham Sadat Sharifi

Mrs. Saham Sadat Sharifi

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
SSSaham Sadat Sharifi
Saham Sadat Sharifi
SFSebastian Fritsche
Sebastian Fritsche
CHChristoph Holzinger
Christoph Holzinger
Norbert EnzingerNorbert Enzinger
Norbert Enzinger
Using the CMT (Cold Metal Transfer, F. Fronius, Upper Austria) welding process, wire arc additive manufacturing (WAAM) enables companies to fabricate steel components in a resource-saving manner (additive vs. subtractive) by properly reinforcing existing steel components. Two fundamental questions are discussed in the current work. The first focus is on the general geometric possibilities offered by this process. The influence of various parameters, such as wire feed speed, travel speed, and torch inclination on the seam shape and build-up rate are presented. The microstructure of the manufactured components is evaluated through metallography and hardness testing. Based on the first results, print strategies are developed for different requirements. Moreover, suitable process parameter sets are recommended in terms of energy input per unit length, weld integrity and hardness distribution. The second focus is on testing and determining joint properties by analyzing the microhardness of the welded structures. The chosen parameter sets will be investigated, and steel quality equivalents according to ÖNORM EN ISO 18265 will be defined.

16 September 2024 in Materials
Verified
Journal Article
Open access
PDF file
SSSaham Sadat Sharifi
Saham Sadat Sharifi
Saeid BakhtiariSaeid Bakhtiari
Saeid Bakhtiari
ESEsmaeil Shahryari
Esmaeil Shahryari
Christof SommitschChristof Sommitsch
Christof Sommitsch
Maria Cecilia PolettiMaria Cecilia Poletti
Maria Cecilia Poletti
Continuous casting is the most common method for producing steel into semi-finished shapes like billets or slabs. Throughout this process, steel experiences mechanical and thermal stresses, which influence its mechanical properties. During continuous casting, decreased formability in steel components leads to crack formation and failure. One reason for this phenomenon is the appearance of the soft ferrite phase during cooling. However, it is unclear under which conditions this ferrite is detrimental to the formability. In the present research, we investigated what microstructural changes decrease the formability of microalloyed steels during continuous casting. We studied the hot compression behaviour of microalloyed steel over temperatures ranging from 650 °C to 1100 °C and strain rates of 0.1 s−1 to 0.001 s−1 using a Gleeble 3800® (Dynamic Systems Inc, Poestenkill, NY, USA) device. We examined microstructural changes at various deformation conditions using microscopy. Furthermore, we implemented a physically-based model to describe the deformation of austenite and ferrite. The model describes the work hardening and dynamic restoration mechanisms, i.e., discontinuous dynamic recrystallisation in austenite and dynamic recovery in ferrite and austenite. The model considers the stress, strain, and strain rate distribution between phases by describing the dynamic phase transformation during the deformation in iso-work conditions. Increasing the strain rate below the transformation temperature improves hot ductility by reducing dynamic recovery and strain concentration in ferrite. Due to limited grain boundary sliding, the hot ductility improves at lower temperatures (<750 °C). In the single-phase domain, dynamic recrystallisation improves the hot ductility provided that fracture occurs at strains in which dynamic recrystallisation advances. However, at very low strain rates, the ductility decreases due to prolonged time for grain boundary sliding and crack propagation.

9 April 2025 in Machines
Verified
Journal Article
Open access
PDF file
HJHamed Davoodi Jooneghani
Hamed Davoodi Jooneghani
KSKlaus Six
Klaus Six
SSSaham Sadat Sharifi
Saham Sadat Sharifi
Maria Cecilia PolettiMaria Cecilia Poletti
Maria Cecilia Poletti
GTGerald Trummer
Gerald Trummer
Fatigue-induced crack initiation and propagation are a major concern in pearlitic railway rails and wheels. Rails and wheels undergo significant plastic deformation on their near-surface layers during service, leading to the initiation and propagation of cracks within the deformed region. Existing models typically use finite element models (FEMs) to describe these kinds of fatigue phenomena. However, they fail to establish a strong connection between the microstructure of the undeformed and the deformed materials and their corresponding fatigue properties. Therefore, a model based on the soft-contact discrete element method (DEM) was developed that considers microstructural details such as prior austenite grains (PAGs), pearlite blocks, pearlite colonies, and lamellar orientation of the ferrite–cementite structure of the pearlite. The Voronoi Tessellation method was used to generate a hierarchical mesh to represent these microstructural details, considering the distribution of microstructural details. Crack propagation is simulated by applying damage laws on the microstructural interface level that degrade the stiffness of the fibers connecting the mesh elements. The model’s crack growth predictions are compared with experimental results from the literature to validate its accuracy for different deformation degrees. The developed model can be used in the designing and material selection phase in the railway industry to help select the material with optimum microstructural features. Also, it can be used for the selection of the optimum heat treatment process considering materials resistance to the fatigue crack growth.

26 August 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
SSSaham Sadat Sharifi
Saham Sadat Sharifi
Saeid BakhtiariSaeid Bakhtiari
Saeid Bakhtiari
ESEsmaeil Shahryari
Esmaeil Shahryari
Christof SommitschChristof Sommitsch
Christof Sommitsch
Maria Cecilia PolettiMaria Cecilia Poletti
Maria Cecilia Poletti
Continuous casting is the most common method for producing steel into semi-finished shapes like billets or slabs. Throughout this process, steel experiences mechanical and thermal stresses, which influence its mechanical properties. During continuous casting, decreased formability in steel components leads to crack formation and failure. One reason for this phenomenon is the appearance of the soft ferrite phase during cooling. However, it is unclear under which conditions this ferrite is detrimental to the formability. In the present research, we investigated what microstructural changes decrease the formability of microalloyed steels during continuous casting. We studied the hot compression behaviour of microalloyed steel over temperatures ranging from 650 °C to 1100 °C and strain rates of 0.1 s-1 to 0.001 s-1 using a Gleeble 3800® device. We examined microstructural changes at various deformation conditions using microscopy. Furthermore, we implemented a physically-based model to describe the deformation of austenite and ferrite. The model describes the work hardening and dynamic restoration mechanisms, i.e., discontinuous dynamic recrystallisation (dDRX) in austenite and dynamic recovery (DRV) in ferrite and austenite. The model considers the stress, strain, and strain rate distribution between phases by describing the dynamic phase transformation during the deformation in iso-work conditions. Increasing the strain rate below the transformation temperature improves hot ductility by reducing DRV and strain concentration in ferrite. Due to limited grain boundary sliding, the hot ductility improves at lower temperatures (<750 °C). In the single-phase domain, DRX improves the hot ductility provided that fracture occurs at strains in which DRX advances. However, at very low strain rates, the ductility decreases due to prolonged time for grain boundary sliding and crack propagation.

1 November 2023 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
SSSaham Sadat Sharifi
Saham Sadat Sharifi
RBR H Buzolin
R H Buzolin
SBS Bakhtiari
S Bakhtiari
MGMarina Gontijo
Marina Gontijo
Christof SommitschChristof Sommitsch
Christof Sommitsch
Maria Cecilia PolettiMaria Cecilia Poletti
Maria Cecilia Poletti
Continuous casting is a well-established process to produce steel slabs. However, the surfaces of the slabs may crack during processing. The occurrence of cracks is related to different phenomena, i.e., ferrite formation, presence of precipitates, and microstructural modifications during manufacturing processing. In the present work, we developed a physically based mesoscale model to describe the plastic deformation of micro-alloyed steel in the single and two-phase fields, as well as the microstructure evolution. We implemented a dislocation density-based constitutive model to calculate the strain hardening and the stress softening produced by dynamic recovery using the Kocks-Mecking (KM) formalism for the austenite and ferrite. We coupled the KM model with the Johnson-Mehl-Avrami-Kolmogorov model to consider the dynamic recrystallization of the austenitic phase. The nucleation and growth of the recrystallized grains, driven by the stored energy, compete with the annihilation of dislocations due to dynamic recovery. In the two-phase domain, the iso-work condition for the load partition is implemented. We calculated the ferrite volume fraction by fitting the data obtained using JmatPro software. Moreover, an Arrhenius-type equation correlates the yield stress to the Zener-Hollomon parameter. We validated the model with isothermal uniaxial compression tests of microalloyed steel over the temperature range of 650 °C-1100 °C and strain rates of 10−2 s−1 and 10−3 s−1 using a Gleeble® 3800 thermomechanical simulator.

19 September 2025 in Advanced Engineering Materials
Verified
Journal Article
Open access
SSSaham Sadat Sharifi
Saham Sadat Sharifi
HJHamed Davoodi Jooneghani
Hamed Davoodi Jooneghani
MDMária Dománková
Mária Dománková
KSKlaus Six
Klaus Six
GTGerald Trummer
Gerald Trummer
Maria Cecilia PolettiMaria Cecilia Poletti
Maria Cecilia Poletti
Rail and wheel steels undergo significant plastic deformation near the surface during service, contributing to wear and crack initiation. This region is exposed to a large deformation gradient, which affects the microstructure and local mechanical properties. This work models and predicts the plastic behavior of pearlitic steels based on microstructural features like phase fraction, interlamellar spacing, cementite thickness, and dislocation densities. A hypoeutectoid steel is heat‐treated to produce diverse microstructures, and the impact of proeutectoid ferrite, pearlite block size, interlamellar spacing, and cementite thickness on mechanical response is analyzed. Compression tests at room temperature and various strain rates, along with microscopy, characterize the samples. A mesoscale model is developed to describe plastic deformation at room temperature. Results show that lower austenitization temperature reduces grain and pearlite block size, while cooling rate inversely affects interlamellar spacing, cementite thickness, and proeutectoid ferrite. Tests indicate low strain rate sensitivity, with flow stress mainly controlled by cooling rate. Rapid cooling produces structures with strength over 1 GPa, while prior austenite grain size and block size have minimal effect on the strength of the pearlitic steel.