The use of Internet of Things (IoT) technology is crucial for improving energy efficiency in smart buildings, which could minimize global energy consumption and greenhouse gas emissions. IoT applications use numerous sensors to integrate diverse building systems, facilitating intelligent operations, real-time monitoring, and data-informed decision-making. This critical analysis of the features and adoption frameworks of IoT in smart buildings carefully investigates various applications that enhance energy management, operational efficiency, and occupant comfort. Research indicates that IoT technology may decrease energy consumption by as much as 30% and operating expenses by 20%. This paper provides a comprehensive review of significant obstacles to the use of IoT in smart buildings, including substantial initial expenditures (averaging 15% of project budgets), data security issues, and the complexity of system integration. Recommendations are offered to tackle these difficulties, emphasizing the need for established processes and improved coordination across stakeholders. The insights provided seek to influence future research initiatives and direct the academic community in construction engineering and management about the appropriate use of IoT technology in smart buildings. This study is a significant resource for academics and practitioners aiming to enhance the development and implementation of IoT solutions in the construction sector.

The increasing Electric Vehicle (EV) market is driven by the desire for more efficient and reliable approaches to recharge EV batteries. Among various charging methodologies for EVs, Wireless Power Transfer (WPT) has gained more attention from EV users due to its features such as safety, low maintenance, comfort, automated operation, and reliability. The innovative WPT method replaces the conductive charging system while maintaining a similar power rating and efficiency. Numerous strategies have been devised to enhance the efficiency and reliability of the WPT model. The primary challenge in WPT is reduction in power transfer efficiency (PTE) as the gap between the coils is increased. Also, the improvement in the PTE depends on various design parameters of the WPT circuit. Therefore, this review article thoroughly investigates recent significant research literatures that explains WPT technology and tailored towards enhancement of PTE. The investigation is carried on various coil configurations, converter topologies and different critical factors to improve PTE such as impedance matching, compensation techniques. Moreover, the research gaps in WPT technology and future scope suitable for static, quasi-dynamic, and dynamic charging methods are presented. This research can play a crucial role in assisting developers in selecting an optimal design to enhance the WPT system.

Modern electrical transportation systems require eco-friendly refueling stations worldwide. This has attracted the interest of researchers toward a feasible optimal solution for electric vehicle (EV) charging stations. EV charging can be simply classified as Slow charging (domestic use), Fast charging and Ultrafast charging (commercial use). This study highlights recent advancements in commercial DC charging. The battery voltage varies widely from 36V to 900V according to the EVs. This study focuses on non-isolated unidirectional converters for off-board charging. Various standards and references for fast off-board charging have been proposed. Complete transportation is changed to EVs, which are charged by the grid supply obtained by burning natural fuels, contributing to environmental concerns. Sustainable charging from sustainable energy sources will make future EV completely eco-friendly transportation. The research gap in complete eco-friendly transit is located in interfacing sustainable energy sources and fast DC EV charging. The first step towards clean, eco-friendly transportation is identifying a suitable converter for bridging the research gap in this locality. A simple approach has been made to identify the suitable DC-DC converter for DC fast-charging EVs. This article carefully selected suitable topologies derived from Boost, SEPIC, Cuk, Luo, and Zeta converters for clean EV charging applications. A detailed study on the components count, voltage stress on the controlled and uncontrolled switches, voltage gain obtained, output voltage, power rating of the converters, switching frequency, efficiency obtained, and issues associated with the selected topologies are presented. The outcome of this study is presented as the research challenges or expectations of future converter topologies for charging.

Owing to the constantly rising energy demand, Internal Combustion Engine (ICE)-equipped vehicles are being replaced by Electric Vehicles (EVs). The other advantage of using EVs is that the batteries can be utilised as an energy storage device to increase the penetration of renewable energy sources. Integrating EVs with the grid is one of the recent advancements in EVs using Vehicle-to-Grid (V2G) technology. A bidirectional technique enables power transfer between the grid and the EV batteries. Moreover, the Bidirectional Wireless Power Transfer (BWPT) method can support consumers in automating the power transfer process without human intervention. However, an effective BWPT requires a proper vehicle and grid coordination with reasonable control and compensation networks. Various compensation techniques have been proposed in the literature, both on the transmitter and receiver sides. Selecting suitable compensation techniques is a critical task affecting the various design parameters. In this study, the basic compensation topologies of the Series–Series (SS), Series–Parallel (SP), Parallel–Parallel (PP), Parallel–Series (SP), and hybrid compensation topology design requirements are investigated. In addition, the typical control techniques for bidirectional converters, such as Proportional–Integral–Derivative (PID), sliding mode, fuzzy logic control, model predictive, and digital control, are discussed. In addition, different switching modulation schemes, including Pulse-Width Modulation (PWM) control, PWM + Phase Shift control, Single-Phase Shift, Dual-Phase Shift, and Triple-Phase Shift methods, are discussed. The characteristics and control strategies of each are presented, concerning the typical applications. Based on the review analysis, the low-power (Level 1/Level 2) charging applications demand a simple SS compensation topology with a PID controller and a Single-Phase Shift switching method. However, for the medium- or high-power applications (Level 3/Level 4), the dual-side LCC compensation with an advanced controller and a Dual-Side Phase-Shift switching pattern is recommended.

Green electricity and green transportation are the primary requirements for smart cities. Maximizing the EV utilization is the key requirement in the development of green transportation. However, the EV technology faces challenges due to the long battery recharging time and heavy batteries to achieve extended driving ranges. Different approaches are investigated to charge the EV by battery swapping, plugin or wireless. Recently the wireless charging approach is gaining popularity because of safety, extended driving range, dynamic charging and human intervention free recharging. However, multiple factors need to considered in the design of WPT system and requires expertise in different domains. This paper discusses a systematic approach on the various parameters involved in a dynamic wireless charging system design. The major functional units in WPT such as charging couplers, compensation network, and power inverters topologies are addressed. Additionally, this paper discusses the issues involved in grid-tied and renewable integrated dynamic charging systems. Moreover, the step by step procesdure is described to understand the process involved in the dynamic charging system design. Finally, various case studies at different power levels are presented to get more insights into practical design.

The usage of electric vehicles (EV) has been increasing over the last few years due to a rise in fossil fuel prices and the rate of increasing carbon dioxide (CO₂) emissions. EV-charging stations are powered by existing utility power grid systems, increasing the stress on the utility grid and the load demand at the distribution side. DC grid-based EV charging is more efficient than AC distribution because of its higher reliability, power conversion efficiency, simple interfacing with renewable energy sources (RESs), and integration of energy storage units (ESU). RES-generated power storage in local ESU is an alternative solution for managing the utility grid demand. In addition, to maintain the EV charging demand at the microgrid levels, energy management and control strategies must carefully power the EV battery charging unit. In addition, charging stations require dedicated converter topologies, control strategies, and need to follow set levels and standards. Based on EV, ESU, and RES accessibility, different types of microgrid architecture and control strategies are used to ensure optimum operation at the EV-charging point. Based on the above said merits, this review paper presents different RES-connected architecture and control strategies used in EV-charging stations. It highlights the importance of different charging station architectures with current power converter topologies proposed in the literature. In addition, a comparison of microgrid-based charging station architecture with its energy management, control strategies, and charging converter controls are also presented. The different levels and types of charging stations used for EV charging, in addition to controls and connectors used, are also discussed. An experiment-based energy management strategy was developed to control power flow among the available sources and charging terminals for the effective utilization of generated renewable power. The main motive of the EMS and its control is to maximize the usage of RES consumption. This review also provides the challenges and opportunities in EV-charging, and parameters in selecting appropriate charging stations.