Green electricity and green transportation are the primary requirements for smart cities. Maximizing the EV utilization is the key requirement in the development of green transportation. However, the EV technology faces challenges due to the long battery recharging time and heavy batteries to achieve extended driving ranges. Different approaches are investigated to charge the EV by battery swapping, plugin or wireless. Recently the wireless charging approach is gaining popularity because of safety, extended driving range, dynamic charging and human intervention free recharging. However, multiple factors need to considered in the design of WPT system and requires expertise in different domains. This paper discusses a systematic approach on the various parameters involved in a dynamic wireless charging system design. The major functional units in WPT such as charging couplers, compensation network, and power inverters topologies are addressed. Additionally, this paper discusses the issues involved in grid-tied and renewable integrated dynamic charging systems. Moreover, the step by step procesdure is described to understand the process involved in the dynamic charging system design. Finally, various case studies at different power levels are presented to get more insights into practical design.
Road transport is becoming increasingly electric as it becomes more environmentally friendly. A green transportation system includes solar arrays along the roadside, encouraging the eco-friendly EV charging system. This paper proposes a road-side photovoltaic system to charge the batteries of slow-moving electric vehicles using a five-leg inverter. The five-legged inverter, which utilizes a stand-alone PV system to drive the charging pads, enhances the probability of achieving the sustainability goal. The limitations of the conventional H-bridge inverter, such as its more prominent design and higher number of switches or straightforward design and restricted power level, are addressed by this converter. The proposed 3.3 kW, 85 kHz inverter energizes the four transmitter pads while a receiver pad moves over the transmitter pads and inductively extracts the power. The d.c.-d.c. converter is used to feed the power to the proposed inverter. The P and O-based MPPT algorithm with a tuned PI controller is used to generate the driving pulses of the d.c.-d.c. converter. The signals are generated based on the voltage and current output of the solar panel output. This control algorithm ensures the stability of the system output response. Additionally, the tuned d.c.-d.c. converter achieves maximum efficiency independent of the load resistance. The system maintains constant power transfer profile concerning load resistance variations. The 520*520 mm Double D-pad transmits the power, while the series-series compensation network assists the charging pads in achieving resonance. The developed systems’ nominal charging voltage and current are 144 V, 20 A, with an equivalent battery resistance of 7.2 Ω.
The recent progress in the dynamic wireless power transfer (DWPT) system brings feasibility to increase the driving range of an electric vehicle (EV). The on-road wireless charging system reduces the volume of the EV’s battery and charging the vehicle while driving. So, the powered roadways can potentially decrease the dependency on heavy-sized batteries for EV applications. The capability of transferring maximum power from the ground surface to the vehicle requires the critical design of the entire DWPT system. The various factors such as wireless charging pads, power electronic converters, compensators, and controllers influence the power transfer rate of the system. An appropriate impedance matching network assists the system during power transfer. Moreover, the design of coils in DWPT needs to consider the sensitive misalignment tolerance, safety issues, complex design, and cost factors. In this article, the basic topologies, history, and fundamentals of the DWPT charging system are discussed. In addition, the impact on the power grid due to the DWPT system and factors involved in microgrid integration are discussed. However, the current scenario of different compensators, converters, and design topologies proposed in the dynamic charging system is included. This article presents a comprehensive overview and challenges involved in a DWPT system such as the design of a power converter, charging couplers, compensation network, foreign object detection system, economic factors, and microgrid-integrated DWPT system. An economic analysis, electromagnetic compatibility, and interference of the charging system are also analyzed vastly. The human exposure level with its allowable limits developed for the wireless power transfer system is discussed.
12 June 2024 in IEEE Transactions on Industrial Electronics
Recent developments in dynamic wireless charging (DWC) show suitable supportive technology to eliminate barriers to electric vehicle (EV) growth. However, the installation cost of DWC brings a significant hurdle for the implementation. Using multileg inverter topology at the transmitter reduces the number of switching devices and enables to sequentially energize the coil based on the vehicle position. However, the EV charging system requires a constant charging profile throughout the charging process. The existing systems are studied for the conventional full bridge inverter with different combinations of hybrid resonators to achieve constant charging. This article investigates and proposes the S-LCC/SP-compensated constant current (CC) and constant voltage (CV) system for multilegged inverterfed DWC system. The compensated system achieves a load-independent constant charging profile with fewer components than the existing approaches. Also, the N-legged inverter reduces the power semiconductor switch count compared to a conventional H-bridge inverter. Moreover, the compensation system design considers the cross-coupling inductance of the transmitter pads to achieve resonance and single-resonant frequency-based CCCV charging without the need for receiver-side communication. The system is designed with a 350 V, 3.3 kW prototype to validate the charging process.
29 August 2025 in IEEE Open Journal of Power Electronics
The increasing global shift towards electric vehicles (EVs) has led to a surge in demand for lithium-ion batteries (LIBs), which serve as the primary energy storage solution for modern EVs. However, with this growth comes significant challenges related to battery performance, sustainability, and end-of-life (EOL) management. This paper provides a comprehensive review of battery technologies, focusing on advancements in lithium-ion batteries, their degradation mechanisms, and the environmental impact of battery disposal. Additionally, it examines the challenges in EV battery recycling, including safety hazards, disassembly complexities, and economic feasibility. The study explores second-life applications of retired EV batteries in energy storage systems, microgrids, and hybrid renewable energy solutions, emphasizing their potential to extend battery usability while minimizing waste. Furthermore, advanced screening, refurbishment, and material recovery techniques are analyzed to improve resource efficiency and reduce the need for new raw material extraction. By proposing a systematic framework for sustainable battery lifecycle management, this research aims to promote a circular economy, optimize battery reusability, and support the transition towards a cleaner, more sustainable future in electromobility.
The increasing demand for wireless power transfer (WPT) systems for electric vehicles (EVs) has necessitated advancements in charging solutions, with a particular focus on speed and efficiency. However, power transfer efficiency is the major concern in static and dynamic wireless charging (DWC) design. Design consideration and improvements in all functional units are necessary for an increase in overall efficiency of the system. Recently, different research works have been presented regarding DWC at the power converter, coil structure and compensators. This paper provides a comprehensive review of power converters incorporating high-order compensation topologies, demonstrating their benefits in enhancing the DWC of EVs. The review also delves into the coupling coil structure and magnetic material architecture, pivotal in enhancing power transfer efficiency and capability. Moreover, the high-order compensation topologies used to effectively mitigate low-frequency ripple, improve voltage regulation, and facilitate a more compact and portable design are discussed. Furthermore, optimal coupling and different techniques to achieve maximum power transfer efficiency are discussed to boost magnetic interactions, thereby reducing power loss. Finally, this paper highlights the essential role of these components in developing efficient and reliable DWC systems for EVs, emphasizing their contribution to achieving high-power transfer efficiency and stability.