The thermal stability of thin films in contact with or during annealing up to has been studied. It is found that stacks react during annealing and a phase separation into polycrystalline Sc-rich (and relatively Si-poor) DySc silicate on top of an amorphous Dy-rich DySc silicate is observed. In contrast, is found to be thermodynamically stable in contact with and to recrystallize upon annealing. These results demonstrate that the previously reported high crystallization temperature of for is not an intrinsic material property but caused by silicate formation.
We report, for the first time, a comprehensive study on various capping integration options for WF engineering in MuGFET devices with TiN gate electrode: HfSiO/cap/TiN, cap/HfSiO/TiN and HfSiO/TiN/cap/TiN vs. reference deposition sequence HfSiO/TiN (cap=Al2O3 for pmos, and Dy2O3 or La2O3 for nmos). We show that: 1) low-VT values (≪0.3V) are achieved for both nmos and pmos, with excellent process control and device behavior down to Lg≈50nm and WFIN≈20nm, for optimized gate stack configurations; 2) inserting a cap layer in-between TiN layers instead of HfSiO/cap/TiN leads to improved mobility, reduced CET without impacting JG, similar noise response and improved BTI behavior, with correction of the abnormal PBTI degradation seen for HfSiO/DyO/TiN. Is also enables simplified and more robust CMOS co-integration of low- and med-VT devices in the same wafer, avoiding loss in CET and damage of the host dielectric with the cap removal process.
22 November 2002 in Journal of Physics: Condensed Matter
Nonvolatile memory devices based on filamentary resistance switching (RS) areamong the frontrunners to fuel future devices and sensors of the internet of things (IoT) era. The capability of many metal-insulator-metal cells to switch between two distinctive resistive states in response to an external electrical stimulus has been demonstrated. Through years of selection, cells based on the drift of metal ions, namely conductive-bridge memory devices, have shown a wide range of applications with nanosecond switching speeds, nanometer scalability,high-density, and low power-consumption. However, for low (sub-10-μA) current operation, a critical challenge is still represented by programming variability and by the stability of the conductive filament over time. Here, by introducing the concept of reverse filament growth (RFG), we managed to control the structural reconfiguration of the conductive filament inside a memory cell with significant enhancements of each of the aforementioned properties. A first-in-class Cu-based switching device is demonstrated, with a dedicated stack that enabled us to systematically trigger RFG, thus tuning the device’s properties. Along with nanosecond switching speeds, we achieved an endurance of up to 106 cycles with a 102 read window, with outstanding disturb immunity and optimal stability of the filament over time. Furthermore, by tuning the filament’s shape, an excellent control of multi-level bit operations was achieved. Thus, this device offers high flexibility in memory applications.
1 January 2016 in Solar Energy Materials and Solar Cells