This paper presents a sensor system for robot localization based on the information obtained from a single camera attached in a fixed place external to the robot. Our approach firstly obtains the 3D geometrical model of the robot based on the projection of its natural appearance in the camera while the robot performs an initialization trajectory. This paper proposes a structure-from-motion solution that uses the odometry sensors inside the robot as a metric reference. Secondly, an online localization method based on a sequential Bayesian inference is proposed, which uses the geometrical model of the robot as a link between image measurements and pose estimation. The online approach is resistant to hard occlusions and the experimental setup proposed in this paper shows its effectiveness in real situations. The proposed approach has many applications in both the industrial and service robot fields.

This paper presents a reflector recognition and localization technique in three-dimensional (3-D) environments, using only times-of-flight (TOFs) data obtained from ultrasonic transducers. The recognition and localization technique is based on the principal component analysis applied to the TOF vectors originating from a sensor that contains two emitting transducers and several receivers. The two emitters simultaneously transmit two coded pulses that are detected later on and discriminated by the receivers, after being reflected in the environment. The proposed technique allows for the possibility of not only recognizing the reflectors, but also estimating approximately its localization referred to the sensor. This technique has been tested with three types of reflectors in 3-D environments: planes, edges, and corners. The achieved results are very satisfactory for reflectors located in the range 50-350 cm.

Encouraged by the considerable cost reduction, small-scale solar power deployment has become a reality during the last decade. However, grid integration of small-scale photovoltaic (PV) solar systems still remains unresolved. High penetration of Renewable Energy Sources (RESs) results in technical challenges for grid operators. To address this, Virtual Power Plants (VPPs) have been defined and developed to manage distributed energy resources with the aim of facilitating the integration of RESs. This paper introduces a hybrid irradiance forecasting approach aimed at facilitating the integration of PV systems into a VPP, especially when a historical irradiance dataset is exiguous or non-existent. This approach is based on Artificial Neural Networks (ANNs) and a novel similar hour-based selection algorithm, has been tested for a real PV installation, and has been validated also considering irradiance measurements from an aggregation of ground-based meteorological stations, which emulate the nodes of a VPP. Under a reduced historical dataset, the results show that the proposed similar hour-based method produces the best forecasts with regard to those obtained by the ANN-based approach. This is particularly true for one-month and two-month datasets minimizing the mean error by 16.32% and 9.07% respectively. Finally, to demonstrate the potential of the proposed approach, a comparative analysis has been carried out between the hybrid method and the most used benchmarks in the literature, namely, the persistence method and the method based on similar days. It has been demonstrated conclusively that the proposed model yields promising results regardless the length of the historical dataset.