This paper presents a new multilevel converter with a reduced number of power components for medium voltage applications. Both symmetric and asymmetric structures of the presented multilevel converter are proposed. The symmetric topology requires equal dc source values, whereas the asymmetric topology uses minimum switch count. However, both structures suffer from high blocking voltage across the switches. To reduce the blocking voltage on switches, an optimal topology is presented and analyzed for the selection of the minimum number of switches and dc sources, while maintaining a low blocking voltage across the switches. A comparative analysis with recently published topologies was performed. The simulation results, as well as the comparative analysis, validated the robustness and effectiveness of the proposed topology in terms of the reduced power loss, lowered number of components, and cost. Furthermore, in addition to the simulation results, the performance of the proposed topology was verified using experimental results of 9, 17, and 25 levels.
In this paper, two different converter topologies for a basic new switched capacitor diode converter with a reduced number of power electronics components, suitable for grid connected photovoltaic applications were proposed. The two different structures of switched diode multilevel converter proposed were: (i) cascaded switched diode and (ii) cascaded switched diode with doubling circuit. The switched-diode multilevel converter was compared with other recent converters. In addition, a new dc offset nearest level modulation technique was proposed. This proposed dc offset technique offers low voltage total harmonic distortion (THD) and high RMS output voltage. The proposed modulation technique was compared with conventional nearest level modulation (NLM) and modified NLM control techniques. The performance of the proposed dc offset modulation technique was implemented using a FPGA Spartan 3E controller and tested with a novel switched capacitor-diode multilevel converter. However, to prove the authenticity of the switched-diode multilevel converter and modulation technique, a laboratory-based prototype model for 7-level and 13-level converters was developed.
8 June 2024 in Journal of Electrical Engineering & Technology
In renewable energy source applications, multilevel inverters with lower power components have become more popular in recent decades. This work exhibits a novel topology for high-quality output in PV applications, along with low-power switches and isolated dc sources. The core module of the suggested design may create a 13-level output waveform with two unequal voltage source values. The cascaded structure is intended to boost the voltage levels, and the related parameters are obtained analytically. The even and odd levels of voltage can be created natively without the usage of an additional H bridge circuit. Furthermore, the switches, gate driver circuits, dc sources, and standing voltage are fewer in number when compared to other recent topologies. Power losses and cost comparisons are calculated and given in monetary terms. This new research supports the idea that nearest level control (NLC) is used as a modulation scheme in the simulation modeling and experimental validation of the proposed topology.
1 June 2020 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Multilevel converters have a significant role in power processing control in the power system, which has some inherent features like reduced harmonics, high power & medium voltage, reduced voltage stress. In this proposed paper, a novel multilevel inverter with reduced number of switches and without passive components. The proposed inverter generates 15 level output voltage with suitable switching pulse generation using multicarrier sinusoidal pulse width modulation (MSPWM) and different level of voltages are obtained with variation of modulation index. Also coupled inductor is used to minimize the harmonic content and smoothing output current. The scheme which includes different range of unequal voltage sources. As a result, the proposed system it reduces switching control complexity and there is no voltage balancing problem. This paper elucidates the operating modes, voltage stress minimisation and harmonic reduction are discussed. The results of the proposed multilevel dc-ac converter are verified using matlab/simulink. The simulation & hardware results of the proposed inverter were verified using matlab simulink and dsPIC controller respectively, which was analysed with different voltage level and different modulation index.
1 June 2023 in Indonesian Journal of Electrical Engineering and Computer Science
The paper presents an idea on pre-emptively ascertaining the soil pH value on an agriculture field amalgaming drone for aerial photo and subsequent smart irrigation model with the help of internet of things (IoT). The drone used for the aerial footage (multispectral imaging) consists of specialized cameras with filters that would help in ascertaining vegetation and health of the crops in the agriculture land. The IoT device used in smart irrigation model consists of sensors which accumulate data and execute the commands given in a recurring fashion of delay. Moreover, the use of triboelectric nanogenerator (TENG) would help in feasible energy harvesting for agricultural land use.