This paper proposes a robust position control scheme for a quadrotor UAV system under uncertainties. The proposed control algorithms combine integral sliding mode and backstepping sliding mode controllers in a double-loop control structure (i.e., inner-outer loop control). The design of the proposed controller is divided into two subcontrollers, namely, attitude and position controllers for the quadrotor. In this work, a nonsimplified six-degree-of-freedom quadrotor model is first established in the presence of disturbances. Afterward, we develop a robust backstepping sliding mode controller for the attitude control of the quadrotor. Next, a robust integral sliding mode controller is designed for the outer loop of the quadrotor to ensure the position trajectory tracking capability in the presence of disturbances. The stability and performance of the quadrotor is thoroughly investigated using Lyapunov stability analysis. Numerical simulations demonstrate the effectiveness of the developed solutions for a quadrotor.
In modern dc shipboard microgrid (SMG) systems, the propulsion motors and hotel loads are always supplied through tightly regulated point of load converters, which behave as constant power loads (CPLs). The negative incremental impedance due to CPL’s characteristics destabilizes the dc bus voltage of dc SMGs. Due to uncertain operating conditions of maritime ships on the sea, the dc bus voltage robust control is a crucial matter. Therefore, this paper presents a cutting-edge systematic review on advanced nonlinear control strategies to stabilize and control the CPLs in dc SMGs, such as sliding mode control, synergetic control, backstepping control, model predictive control, and passivity-based control. The latest stabilization techniques and the future trends towards an adaptive nonlinear control have been presented throughout this review. Several feedforward control-based observation and estimation techniques have been highlighted. The stability analysis and stability challenges of dc SMGs are also discussed.
Global climatic changes and increased carbon footprints provided the main impetus for the decrease in the use of fossil fuels for electricity generation and transportation. Matured manufacturing technologies of solar PV panels and on-shore and off-shore windmills have brought down the cost of generation of electricity using solar energy on par with conventional fossil fuel. Initially, solar and wind power generation was envisioned for microgrids, serving small local communities. However, advancements in power electronics have now facilitated large solar and wind farms to be integrated with main power grids. In this context, hosting capacity, which is the amount of distributed energy resources a grid can accommodate, without significant infrastructure up-gradation, has gained importance. In determining the hosting capacity at a particular location, the uncertainties of wind and solar power generation play a role. Effective forecasting models using time-series weather data can be built to predict wind and solar power generation. This forecast is essential to ensure proper grid operation and control when renewable energy sources are already installed. The forecast is also useful in the planning stages for investment decisions and distribution system planning. While long-term forecasts are rarely needed for the operation of integrated grids, accurate short-term predictive models are necessary for scheduling. This paper presents an extensive review of various forecast models available in the literature. The study mainly focuses on the short-term forecast, providing a critical review of the duration of data used in each model and a synoptic comparison of their performance indices.
15 April 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this letter, a new cross-connected compact switched capacitor (C3SC) cell is introduced for multilevel inverter applications. The proposed CCS cell uses four switches and two diodes for interconnecting the input dc source and floating capacitors (FCs). A nine-level inverter is derived with the proposed C2SC cell requiring only ten switches and two FCs. The proposed C3SC cell-based MLI is self-balancing and has a voltage gain of two. All the switches of the proposed topology have a maximum blocking voltage within the input dc voltage (vin) value. The operating principle is detailed, and a simple logic gate based gate pulse generation scheme is presented. Detailed simulations and experimental results obtained from an 850 W prototype with several test cases are presented to validate the operation of the proposed topology. Finally, a detailed comparative assessment is performed with other recent SCMLIs to demonstrate the merits and superiority of the proposed topology.
27 March 2023 in IEEE Transactions on Industrial Electronics
This article describes the implementation of a proposed hybrid whale optimization algorithm differential evolution (WOADE) as a maximum power point tracking (MPPT) for wind energy conversion systems (WECS) employed for water pumping applications. The proposed hybrid MPPT algorithm provides rapid and zero oscillation power tracking to achieve the global maximum power point within a limited number of iterations. In this work, the exploitation capability of the whale optimization algorithm is integrated with the exploration behavior of differential evolution (DE) to improve the tracking ability over a steady and dynamic operating climate. The performance of a permanent magnet synchronous generator-driven centrifugal pump for water pumping applications with wind energy conversion systems has also been investigated. A modified $\acute{\text{C}}$ uk converter provides a higher output voltage with an enhanced voltage conversion ratio and is employed for optimal wind power tracking. The practical realization is done to substantiate the productiveness of the introduced hybrid WOADE-based MPPT algorithm for WECS applied for water pumping under varying and sudden changes in wind velocity.
15 April 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
The new inverter topologies based on switched capacitor concept with voltage boosting ability are attractive for the low voltage applications. Such low voltage requirements allow a single-stage dc-ac power conversion, improving overall system performance, reliability and power density. This paper proposes a new multilevel inverter topology based on the switched-capacitor (SC) with a single source of dc voltage. The proposed topology is ideal for low voltage renewable energy applications. Seven-level (7L) output voltage is accomplished with triple voltage gain using two switched capacitors and 10 switches. Other major features of the proposed topology are self-voltage balancing of capacitor voltages, reduced number of switches with lower voltage stress and generation of negative voltage levels without using backend H-bridge. To show the advantages of the proposed topology, a detailed comparison with other similar topologies with seven-level single-source configuration has been accomplished in the paper. The proposed topology has been tested using the traditional level-shifted sinusoidal pulse width modulation (LS-PWM) technique. The paper includes various experimental results with different operating conditions to prove the performance of the proposed topology.