WUCHENG YING

Mr. WUCHENG YING


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 May 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
AJAmeer Janabi
Ameer Janabi
LSLuke Shillaber
Luke Shillaber
WYWUCHENG YING
WUCHENG YING
WMWei Mu
Wei Mu
BHBorong Hu
Borong Hu
TLTeng Long
Teng Long
This article proposes a new power electronic packaging for discrete dies, namely, a standard cell, which consists of a step-etched active metal brazing (AMB) substrate and a flexible printed circuit board (flex-PCB). The standard cell exhibits high thermal conductivity, complete electrical insulation, and low stray inductance, thereby enhancing the performance of SiC mosfet devices. The standard cell has a stray power loop inductance of less than $\text{1}\,\text{nH}$ and a gate loop inductance of less than $\text{1.5}\,\text{nH}$ . The standard cell has a flat body with surface-mounting electrical connections on one side and direct thermal connections on the other. The use of flex-PCB die interconnection enables maximum utilization of source pads while providing a flexible gate-source connection and the converter PCB. This article presents the design concept of the standard cell and experimentally validates its effectiveness in a converter system.

20 January 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Hui ZhaoHui Zhao
Hui Zhao
YSYanfeng Shen
Yanfeng Shen
WYWUCHENG YING
WUCHENG YING
JQJinwei Qi
Jinwei Qi
Chaoqiang JiangChaoqiang Jiang
Chaoqiang Jiang
TLTeng Long
Teng Long
Conventional switched-mode power supplies have intrinsic instantaneous power pulsation at the switching frequency thus require bulky filters. To improve the power density, this paper proposes a concept named the mixed analog-digital (MAD) which can be applied as dc-dc converters. By inserting an analog voltage component between the load and source, the output voltage naturally has much smaller fluctuation thereby much smaller passive filter is required. Simulations and experiments validate that the proposed MAD concept can be applied as dc-dc converters to significantly increase the power density.

18 January 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZWZiyang Wang
Ziyang Wang
WYWUCHENG YING
WUCHENG YING
YZYinong Zeng
Yinong Zeng
SWSHUO WANG
SHUO WANG
Chaoqiang JiangChaoqiang Jiang
Chaoqiang Jiang
Hui ZhaoHui Zhao
Hui Zhao
PCB inductors can enhance the integration of power electronics systems and hence are in high demand. Nevertheless, PCB inductors encounter challenges, such as the severe skin effect and significant inductance reduction, in both ac and dc conditions as trace widths increase. This letter identifies the cause of this inductance reduction and proposes an innovative PCB inductor structure to mitigate these issues. The new design also utilizes split wires to effectively suppress the skin effect. Comprehensive simulations and experiments demonstrate that the proposed equally split PCB inductor can achieve both high energy density and low near-field magnetic radiation.

23 May 2022 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
ZLZhaokai Li
Zhaokai Li
Xiaoyan HuangXiaoyan Huang
Xiaoyan Huang
ZLZixuan Liu
Zixuan Liu
LWlijian wu
lijian wu
TLTeng Long
Teng Long
YFYoutong Fang
Youtong Fang
This article analyzed and compared the complex permeance model (CPM) and nonlinear analytical model (NAM) for surface-mounted permanent magnet (SPM) motor using a voltage source inverter (VSI). For linear CPM, the slotting effect is represented using the improved complex permeance function that describes the real slot shape rather than infinitely deep slot. NAM is extended from CPM and it replaces the magnetic potential drop of stator iron by the equivalent virtual current in the slot-opening and tooth-tip to account for the nonlinearity effect. The nonlinear inductance of SPM motor including the main phase inductance, slot leakage inductance, tooth-tip leakage inductance, and end winding leakage inductance is calculated using the frozen permeability method, which is the key to solve the electric circuit with VSI. The instantaneous back electromotive force (EMF) is calculated from the nonlinear back EMF coefficient and the back EMF neglecting iron nonlinearity. The electromagnetic torque obtained from motor model is used in the mechanical model and then the rotational speed and rotor position are obtained for the electric circuit model. Hence, the iterative solving process for the motor system is established to calculate the transient performance of SPM motor using VSI. Compared with CPM, NAM can greatly improve the calculation accuracy, which is also validated by both finite-element model and experiment. Besides, the proposed NAM is computationally efficient, which is useful for both motor design and motor control.

25 July 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
WYWUCHENG YING
WUCHENG YING
Hui ZhaoHui Zhao
Hui Zhao
AJAmeer Janabi
Ameer Janabi
JQJinwei Qi
Jinwei Qi
DMDi Mou
Di Mou
TLTeng Long
Teng Long
Aiming for high-efficiency and high power-density converters—where turn-on loss normally dominates overall losses—zero-voltage-switching (ZVS) techniques are the most popular approach to eliminate turn-on loss. Notably, inaccurate ZVS boundaries can misguide design, causing under- and/or over-engineering of the load current, resulting in a loss of ZVS and/or excessive conduction and turn-off losses, thereby preventing optimal performance. However, this article reports a discovery, through experimental measurement, that state-of-the-art models can produce significant errors ranging from 18% to 59%. In this article, the work presents an in-depth study of the true zero-voltage switching boundary (TZVSB). An analytical overview of existing prediction methods is provided first. To accurately identify the TZVSB, a groundbreaking model is proposed and experimentally validated, incorporating previously unaccounted impact factors—including other capacitances, such as snubber capacitances, parasitic capacitances of magnetics and PCBs, long dead-time effects, dissipated energies, and asymmetry between upper and lower switches. As a result, the proposed model achieves unprecedentedly low errors ranging from 0.09% to 3.6%. Furthermore, it establishes, for the first time, the fundamental equivalence between energy-based and charge-based analyses, thereby unifying the two mainstream analytical frameworks that have remained disconnected for decades and validating their theoretical foundations.

18 February 2024 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
JZJiaming Zheng
Jiaming Zheng
YDYi Du
Yi Du
DCDachuan Chen
Dachuan Chen
WYWUCHENG YING
WUCHENG YING
Hui ZhaoHui Zhao
Hui Zhao
Jian QiuJian Qiu
Jian Qiu
In power converters with high switching frequency, drive losses constitute a significant portion of the overall power losses. Resonant gate drivers can reduce drive losses, thereby enhancing the efficiency. However, resonant drivers suffer certain challenges: parameter drifts lead to the mismatch between the resonant frequency and the control frequency, and this mismatch can cause gate-to-source voltage overshoot. Moreover, the resonant driver is susceptible to external interference. This paper proposes a resonant circuit structure and control timing scheme aimed at overcoming these limitations. By incorporating a half-bridge clamp circuit, the proposed design achieves voltage clamping, thereby insulating the system from disturbances caused by mains power fluctuations. When there is a mismatch in resonant frequencies, the strategy employs a combination of hardware circuit diodes and control system timing to prevent overvoltage issues. Additionally, the utilization of MOSFETs minimizes the loss caused by prolonged current flow through body diodes, further reducing the resonant driving losses. Simulations have demonstrated the system’s stability under varying resonant parameters and its effective anti-interference capabilities in voltage clamping. Experiments achieved a power saving of 83.3% at a 1 MHz operating frequency. Both simulations and experimental validations confirm the feasibility of the proposed solution, its effectiveness in interference suppression, handling of resonant mismatches, and its role in further augmenting power conservation.