Gwendolin Rohner

Gwendolin Rohner


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2020
Verified
Conference Paper
Closed access
JKJohann Kolar
Johann Kolar
JAJon Azurza
Jon Azurza
Spasoje MiricSpasoje Miric
Spasoje Miric
MHMichael Haider
Michael Haider
MGM. Guacci
M. Guacci
DBD. Bortis
D. Bortis
Latest research results on three-phase wide-bandgap (WBG) inverter systems with full-sinewave output voltage filtering are reported. A new soft-switching modulation scheme for two-level 1200 V SiC inverters is described. Furthermore, a new Figure-of-Merit for determining maximum multi-level (ML) bridge-leg efficiency is defined and low-voltage GaN devices are evaluated considering ML flying capacitor (FC) and multi-cell inverter structures. Finally, new integrated-filter buck-boost current DC-link inverter topologies are discussed.

5 June 2023 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
MHMichael Haider
Michael Haider
PNPascal S. Niklaus
Pascal S. Niklaus
MMManuel Madlener
Manuel Madlener
GRGwendolin Rohner
Gwendolin Rohner
JKJohann Kolar
Johann Kolar
Compared to state-of-the-art IGBTs, SiC power semiconductors allow to achieve ever higher system efficiencies and higher power densities in next-generation Variable Speed Drives (VSDs), thanks to their smaller relative chip size, ohmic on-state characteristic and lower specific switching losses resulting in a smaller switching-stage footprint and lower heat sink as well as DC-link capacitor volumes. However, the high slew rate of the switching transitions, an inherent consequence of the low switching losses, represents a major challenge and potentially results in lifetime degrading unequal voltage distribution across the motor windings and bearing currents. This work analytically and experimentally compares different means for d $v$ /d $t$ -limitation, namely, a conventional passive LC-d $v$ /d $t$ -filter and a Gate Driver (GD)-based approach based on increased GD resistances in combination with explicit Miller capacitors, at the example of a $10\,$ kW industrial motor-integrated VSD. For a state-of-the-art d $v$ /d $t$ -limitation of up to $6\,$ V/ns the LC-filter shows lower losses compared to the GD-based limitation. The latter, however, has a higher part-load efficiency and/or lower losses compared to the (roughly) load independent losses in the LC-filter resulting from the dissipation of the energy stored in the filter capacitor within each switching cycle, beneficial for light loads, e.g., $< 40\,$ % of rated output power. Next-generation motors with reinforced insulation allow a d $v$ /d $t$ -limitation of up to $15\,$ V/ns. In this case, the GD-based limitation shows lower losses in the whole operating range, since they directly scale with the now smaller overlap of voltage and current resulting from the faster switching transitions. Considering a state-of-the-art motor, finally, a hardware demonstrator of a three-phase VSD employing an LC-filter to limit the d $v$ /d $t$ to $5.6\,$ V/ns is realized, which achieves a full inverter stage power density of $30\,$ kW/dm $^{3}$ ( $497\,$ W/in $^{3}$ ) and an inverter efficiency of $>99\,$ %

25 October 2023 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
GRGwendolin Rohner
Gwendolin Rohner
TGTino Gfrörer
Tino Gfrörer
PNPascal S. Niklaus
Pascal S. Niklaus
JHJonas Huber
Jonas Huber
DBDominik Bortis
Dominik Bortis
JKJohann Kolar
Johann Kolar
With today's demand for increased industrial process automation a trend towards Integrated Motor Drives (IMDs) has evolved allowing a low complexity and compact installation of the drive system. Especially servo applications with high short-term overload requirements (e.g., three times the nominal current for several seconds) are a thermal challenge for the power electronics. Consequently, high efficiencies and power densities are key requirements of these motor-integrated Variable Speed Drives (VSDs). Multi-Level (ML) inverter topologies allow small LC output filter designs and benefit from utilizing low-voltage semiconductors with superior conduction and switching performance, and thus represent an interesting approach for future IMDs. In this work an experimental comparison between three different 800 V DC link supplied drive systems is presented, namely between a 3L Flying Capacitor Converter (3L-FCC) (employing 650 V GaN HEMTs), a 7L Flying Capacitor Converter (7L-FCC) (using 200 V SI MOSFETs) and its promising alternative, a 7L Hybrid Active Neutral-Point Clamped Converter (7L-HANPC) (using both, 650 V GaN HEMTs and 200 V SI MOSFETs). All three systems are realized as hardware demonstrators for the same specifications, i.e., for integration into a Permanent Magnet Synchronous Motor (PMSM) with a case temperature of 90°C, 7.5 kW nominal output power at >99%efficiency and a short-term overload capability of three times the nominal current for 3s. Thereby, the efficiencies and the thermally critical overload capability are experimentally verified. Overall, the 3L-FCC shows the best performance trade-off with lowest complexity and/or highest reliability and minimal control effort.

8 January 2024 in IEEE Access
Verified
Journal Article
Open access
GRGwendolin Rohner
Gwendolin Rohner
TGTino Gfrörer
Tino Gfrörer
PNPascal S. Niklaus
Pascal S. Niklaus
DBDominik Bortis
Dominik Bortis
MSMario Schweizer
Mario Schweizer
JKJohann Kolar
Johann Kolar
Integrated Motor Drives (IMDs) are gaining popularity in industrial Variable Speed Drive (VSD) applications, thanks to their more compact realization and simpler installation. However, mission profiles of, e.g., servo applications, demand overload torques of two to three times the nominal value during several seconds, which is thermally challenging for the power electronics. Accordingly, high efficiency and power density of the inverter are of paramount importance for motor integration. Multi-Level Flying Capacitor inverters (ML-FCis) benefit from a reduced output filter volume and improved switching and on-state performance of low-voltage devices for increasing number of levels $N$ , whereas the PCB overhead and gate drive volume increases. In this paper, the most power dense solution between a seven-level (7L) FCi with Si semiconductors and a three-level (3L) FCi with GaN semiconductors is evaluated. Thereby, a straightforward design procedure allows to dimension both FCis for 99% efficiency at nominal operation, while providing a high short-term overload torque (three times the nominal torque) also for low inverter output frequencies. Due to its slightly higher power density and greatly reduced complexity, a phase module of the 3L GaN FCi is realized as an IMD hardware demonstrator. A transient thermal model is employed to specify the feasible overload operating range, considering the limited heat spreading in the baseplate and parameter variations, e.g., from manufacturing tolerances. The experimental analysis of the demonstrator verifies an efficiency of 98.94% and the practically required overload capability.

11 December 2024 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
JSJannik Schäfer
Jannik Schäfer
GRGwendolin Rohner
Gwendolin Rohner
JKJohann Kolar
Johann Kolar
This paper extends the Generalized Steinmetz Equation (GSE) to account for the influence of mechanical stress on ferrite core losses. Experimental measurements are used to quantify the effects of compressive and tensile stresses on the relative permeability and the core losses of different ferrite materials. Mechanical stress is found to significantly affect the core losses, depending on the relative orientation of the magnetic flux density and the applied mechanical stress. Specifically, the losses monotonically increase when the flux and compressive stress vectors are parallel, while perpendicular vectors lead to a more complex response depending on the level of mechanical stress. The measured loss characteristics are translated in an extension of the GSE (X-GSE), which is validated for different ferrite materials, and provides a useful tool for a first rough estimation of the core losses under mechanical stresses. Finally, FEM simulations demonstrate how thermally induced mechanical stresses in a ferrite core can redistribute the magnetic flux and therefore impact the resulting core losses, which underlines the importance of considering the stress dependence of core losses in ferrite, especially in the development of magnetic components to be encapsulated in incompressible materials.

28 March 2024 in Electronics
Verified
Journal Article
Open access
PDF file
GRGwendolin Rohner
Gwendolin Rohner
JHJonas Huber
Jonas Huber
Spasoje MiricSpasoje Miric
Spasoje Miric
JKJohann Kolar
Johann Kolar
This article presents a comprehensive comparative evaluation of a three-phase Three-Level (3L) Flying Capacitor Converter (FCC) and a Stacked Polyphase Bridge Inverter (SPBI), specifically a converter system formed by two Series-Stacked Two-Level three-phase Converters (2L-SSC), for the realization of a 7.5 kW Integrated Motor Drive (IMD) with a high short-term overload capability. The 2L-SSC requires a motor with two three-phase windings and a split DC-link, but uses standard six-switch, two-level transistor configurations. In contrast, the bridge legs of the 3L-FCC feature flying capacitors whose voltages must be actively balanced. Despite the 800 V DC-link voltage, both topologies employ the same set of 650 V GaN power transistors, i.e., the same total chip area, and if operated at the same switching frequency, show identical semiconductor losses. Electric Discharge Machining (EDM) damage of the motor bearings is a relevant issue caused by the common-mode (CM) voltages of the inverter stage. The high effective switching frequency of the 3L-FCC and the possibility of CM voltage canceling in the 2L-SSC facilitate mitigation of EDM by means of CM chokes, whereby a substantially smaller CM choke with lower losses suffices for the 2L-SSC; based on exemplary designs, the 2L-SSC features only about 75% of the total volume and 85% of the nominal losses of the 3L-FCC. If, alternatively, motor-friendliness is maximized by including DC-referenced sine-wave output filters, the 3L-FCC’s higher effective switching frequency and the 2L-SSC’s need for two sets of filters due to the dual-winding-set motor change the outcome. In this case, the 3L-FCC features only about 60% of the volume and only about 55% of the 2L-SSC’s nominal losses.