Municipal sewage sludge is the residual material produced as a waste of municipal wastewater purification. It is a sophisticated multi-component material, hard to handle. For many years, it has been landfilled, incinerated, and widely used in agriculture practice. When unproperly discharged, it is very polluting and unhealthy. The rapidly increasing global amount of municipal sewage sludge produced annually depends on urbanization, degree of development, and lifestyle. Some diffused traditional practices were banned or became economically unfeasible or unacceptable by the communities. In contrast, it has been established that MSS contains valuable resources, which can be utilized as energy and fertilizer. The objective of the review was to prove that resource recovery is beneficially affordable using modern approaches and proper technologies and to estimate the required resources and time. The open sources of information were deeply mined, critically examined, and selected to derive the necessary information regarding each network segment, from the source to the final point, where the municipal sewage sludge is produced and disposed of. We found that developed and some developing countries are involved with ambitious and costly plans for remediation, the modernization of regulations, collecting and purification systems, and beneficial waste management using a modern approach. We also found that the activated sludge process is the leading technology for wastewater purification, and anaerobic digestion is the leading technology for downstream waste. However, biological technologies appear inadequate and hydrothermal carbonization, already applicable at full scale, is the best candidate for playing a significant role in managing municipal sewage sludge produced by big towns and small villages.

Hydrothermal carbonization enables the valorization of biomass via thermochemical conversion into various products. Today, this technology is experiencing a situation similar to that experienced in the past by other process technologies. Of these technologies, some have become important industrial realities, such as reverse osmosis, while others have never been able to establish themselves fully. This paper presents a brief overview of this technology’s current status, highlighting its strengths and various drawbacks. The primary purpose of the research activity is to identify a possible future scenario toward which this technology is heading. Hydrothermal carbonization has already been established on a laboratory scale for some time, and now it is in a transitional phase between pilot-scale and industrial-scale applications. The interest that HTC has aroused and continues to arouse is evidenced by the growing number of publications and patents published. In particular, the uniform percentage of patents filed in various countries testifies to the worldwide interest. This technology has advantages but also some bottlenecks that have yet to be overcome. Process integration, higher-capacity plants, and the use of Industry 4.0 technologies seem to be the most interesting options to overcome the last limiting factors and make hydrothermal carbonization an established industrial reality.

The production of olive oil involves the sustainable management of the waste produced along the entire production chain. This review examines the developments regarding cultivation techniques, production technologies, and waste management, highlighting the goals to be achieved and the most reasonable prospects. The results show that cultivation and production technology have evolved to an almost final solution to meet economic feasibility, keeping the oil’s high quality. Continuous horizontal decanters will coexist with traditional mills in many countries with old olive oil production and consumption traditions. High-quality products have conquered markets, especially in the wealthiest countries. At the same time, the exploitation of dried pomace by solvent extraction is increasingly an obsolete practice. However, waste management is still looking for one or a few reasonable solutions that meet modern society’s constraints. The enhancement of some experienced technologies and the full-scale application of emerging technologies and strategies should solve this problem in the short–medium term. A short discussion is reported on the possibility of unifying the nature and the quality of the waste, whatever the olive oil production method is. Furthermore, modern thermochemical treatment for solid wet organic waste disposal is examined and discussed.

Municipal sewage sludge, a by-product of urban wastewater treatment, is increasingly recognized to be a strategic resource rather than a disposal burden. Traditional management practices, such as landfilling, incineration, and land application, are facing growing limitations due to environmental risks, regulatory pressures, and the underuse of the sludge’s energy and nutrient potential. This review examines the evolution of sludge management, focusing on technologies that enable energy recovery and resource valorization. The transition from linear treatment systems toward integrated biorefineries is underway, combining biological, thermal, and chemical processes. Anaerobic digestion remains the most widely used energy-positive method, but it is significantly improved by processes such as thermal hydrolysis, hydrothermal carbonization, and wet oxidation. Among these, hydrothermal carbonization stands out for its scalability, energy efficiency, and phosphorus-rich hydrochar production, although implementation barriers remain. Economic feasibility is highly context-dependent, being shaped by capital costs, energy prices, product markets, and policy incentives. This review identifies key gaps, including the need for standardized treatment models, decentralized processing hubs, and safe residual management. Supportive regulation and economic instruments will be essential to facilitate widespread adoption. In conclusion, sustainable sludge management depends on modular, integrated systems that recover energy and nutrients while meeting environmental standards. A coordinated approach across technology, policy, and economics is vital to unlock the full value of this critical waste stream.

The high demand for rare earth permanent magnets (REPMs) for use in advanced electrical equipment has led to the classification of some rare earth elements (REEs), such as neodymium, praseodymium, and dysprosium, as strategic raw materials by the European Union. Finding an efficient method with economic benefits and minimal environmental impact is one of the challenges of recycling REPMs. A novel method to recover REPM metals by dissolving them with citric acid and separating the rare earth elements using the solvent extraction method as the next step has been introduced. Therefore, this research investigates the efficiency and kinetics of leaching REPM swarf by citric acid (0.5 to 2.5 M). The results showed that increasing the citric acid concentration from 0.5 M to 1.45 M significantly enhanced the dissolving rate of all studied elements. Although the results showed that the optimal concentration of citric acid in the leaching reagent was between 0.9 and 1.45 M, the REE dissolving reaction with a leaching reagent containing 1.45 M and 0.9 M citric acid reached equilibrium conditions at about 120 and 180 min, respectively. It could be concluded that using citric acid as an organic acid can dissolve the metals in REPM swarf with high efficiency and a fast dissolving rate. This issue can be considered key for recycling REPMs and the future REE supply challenge.